Why is my Chevy Colorado blower motor not working?
Why is my Chevy Colorado blower motor not working?
Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness. My 05 Colorado fan just stopped working the other day. I pulled the fan out and hot wired it and it worked. Put in a new resistor, still didn’t worked. Have juice to the resistor and everywhere else .
Where is the blower ground on a Chevy Colorado?
Pull the door sill panel, pull the kick panel cover, and it is right there. Test the voltage of the brown wire at both sides with the motor switch on 4 and see if you have 12v on both sides. The wire is the same color brown and gauge as the wire in the motor plug. Hit me up if you have any questions! Click to expand…
What to do when your 05 Colorado fan stops working?
Pull the plastic off of that area in front of the door under the glove box. My harness, along with others have had the wires for the blower melted. Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness. My 05 Colorado fan just stopped working the other day.
Where are the ground connections on a blower motor?
The fan resistor and speed switching is done on the negative side of the motor and is most likely where your problem is. The two major failure points on the negative side are the resistor connections and the ground connections at the fender.
Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness. My 05 Colorado fan just stopped working the other day. I pulled the fan out and hot wired it and it worked. Put in a new resistor, still didn’t worked. Have juice to the resistor and everywhere else .
Pull the door sill panel, pull the kick panel cover, and it is right there. Test the voltage of the brown wire at both sides with the motor switch on 4 and see if you have 12v on both sides. The wire is the same color brown and gauge as the wire in the motor plug. Hit me up if you have any questions! Click to expand…
Pull the plastic off of that area in front of the door under the glove box. My harness, along with others have had the wires for the blower melted. Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness. My 05 Colorado fan just stopped working the other day.
What happens if the blower motor fails on all 4 positions?
If the blower motor fails to operate on position 1, 2, and 3 while 4 still works, then you have a resistor pack problem. If the motor fails on all 4 positions, then the resistor pack is probably OK and your problem could be any of the items 2 through 6. The following assumes your blower motor is failing on all 4 speed positions.
Where is the blower ground on a GMC Canyon?
Pull the plastic off of that area in front of the door under the glove box. My harness, along with others have had the wires for the blower melted. Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness.
Where is the harness on a Chevy Colorado blower?
This harness is located in the passenger kick panel. Pull the door sill panel, pull the kick panel cover, and it is right there. Test the voltage of the brown wire at both sides with the motor switch on 4 and see if you have 12v on both sides.
Pull the plastic off of that area in front of the door under the glove box. My harness, along with others have had the wires for the blower melted. Cut it out of both sides, attach a new piece of wire as a jumper, and re connect the harness.
This harness is located in the passenger kick panel. Pull the door sill panel, pull the kick panel cover, and it is right there. Test the voltage of the brown wire at both sides with the motor switch on 4 and see if you have 12v on both sides.
