Why is my brake light not working on my Silverado?

Sounds like the classic signs of a bad multi-function switch. Usually the middle brake light is tied directly to the brake switch so if that light works it indicates the brake switch is doing its’ job and power is good past the switch.

What are the fuses for the brake lights on a Silverado?

The current path from what I can guess starts at the battery, through a 25 amp stop lamp fuse, connector c202, 15 amp vehicle stop fuse, connectors e7 and c3, rear lamps junction block, then to the stop lamps themselves. Edit; there’s also a separate 10 amp fuse for the high center stop lamp it appears, named “vhl chmsl” fuse for some reason.

What should I do if my brake lights dont work?

My back up lights and running lights work. ive checked all my fuses replace the bulbs. ive replaced my brake light swicth and also my tail lamp circuit board. ive have not lost ground to my brake light sockets but not getting 12volts. See if the hazard flashers work.

What causes brake lights to not work but tail lights do?

5 Causes of Brake Lights Don’t Work But Tail Lights Do 1 Bad Light Bulbs 2 Bad Brake Light Switch 3 Broken fuse or fuse box 4 Bad sockets and connectors 5 Broken wire More …

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

Are there any brake lights that are not working?

Bed brake lights not… The bed brake lights are not working, but all other lights including the center mount brake light are working fine. I checked every fuse in both boxes and all four bulbs and they all appear fine.

Are there any Silverado tail lights that last?

Our 99-06 Silverado tail lights are built to last, will run for years without issue and come with high grade bulbs that rarely ever burn out. We also offer some high quality 99-06 Silverado tail light covers that are designed to give your tail lights a cool custom look while adding some added protection to them.

Where is the brake light switch on my car?

Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.

What to do when your brake lights are not working?

In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.

Why does the emergency brake light not come on?

This is done by taking one component at a time and finding where the voltage drops. This wire or component will be the cause of the signal not reaching the bulb. Voltage will start at the fuse box where a power supply will be sent to the emergency brake pedal switch.

How do you open the fuse box on a Chevy Silverado?

Remove the fuse box cover by lifting up the left side as you push the tabs out of their slots. Depending on the year Silverado you have and if the fuse box has never been opened, you may need to pry up the cover with a flat head screwdriver.

What to do if your brake lights are stuck?

The easiest way to diagnose brake lights that are stuck on is to unplug the wiring harness to the brake pedal switch. If the brake lights turn off, you know that the switch is bad. If the brake lights stay on, you’ll need to find the wiring problem.

Why does the center mount brake light not work?

Since the center mount brake light works when the pedal is pressed it appears that the brake switch is not the issue. Does anyone have any ideas for what else could cause this? Thanks for your help.

Why are the brake lights stuck on my Chevy Silverado?

Here are some of the most common reasons why your Chevy Silverado’s brake lights may be stuck on. Most of them are related to the switch that turns them on or off. They are written in order from most likely to least likely to be causing the problem. 1. Bad Brake Light Switch

Why are the brake lights on my bed not working?

The bed brake lights are not working, but all other lights including the center mount brake light are working fine. I checked every fuse in both boxes and all four bulbs and they all appear fine. Since the center mount brake light works when the pedal is pressed it appears that the brake switch is not the issue.

What should I do if my brake light wont turn on?

Only one of the switch terminals should turn on the test light. When you depress the brake pedal, both switch terminals should turn on the test light. If only one of the wires turns on the test light, unplug the switch and jump the two connections at the connector.

Where are the black wires at the brake light?

Black wires at the lamps provide the ground connections. Since 2003 Dan Ferrell has contributed general and consumer-oriented news to television and the Web. His work has appeared in Texas, New Mexico and Miami and on various websites. Ferrell is a certified automation and control technician from the Advanced Technology Center in El Paso, Texas.

How many Chevy Silverado cab lights are there?

. Only 9 left in stock – order soon. . Only 3 left in stock – order soon. . . Only 18 left in stock – order soon. . Only 19 left in stock – order soon.

How do you remove a power brake booster?

Remove the clip that secures the connector and push the tab to release it. Use the proper brake line flare wrench to disconnect the brake fluid lines and unscrew the mounting nuts with your ratchet and socket. Once you’ve removed the master cylinder, tip it over your drain pan to allow any remaining fluid to drain.

Where are the brake lights on a Chevy Silverado?

Underneath the dashboard there is a switch that the brake pedal presses into. When you press the brakes this switch is activated and the brake lights turn on. When you take your foot off the brake, it presses this switch in and the brake lights turn off.

What happens if you have a brake leak in a Chevy Silverado?

The leak can get worse over time and lead to brake failure. Your brake system is divided into two circuits. These circuits cut the brake system in two. That way, if the brake system gets a leak or fails, you still have brakes on half of your Silverado’s wheels.

Check the Brake Lights Circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, that the terminals are free of corrosion and that the connections are tight. Then check the brake light switch on the bake pedal arm. Back probe the switch terminals with a test light.

What to do if your third brake light is not working?

You can get creative and check the power to a spot on the frame and then switch to the audio continuity test and see if the ground is good. if you dont have power look for a fuse, if you have power and ground you have a problem with the bulb or bulb harness.