Why does the airbag light stay on on a Chevy Impala?

It’s when it stays on that indicates a problem. Your airbag light is part of your Impala’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.

Is there a service air bag recall on my Impala?

I just bought a 09 impala LT with 47k miles and i am also having this service air bag light coming on randomly, i called dealer about it and gave them my last 8 digit of vin and told me there is no recall, but i can bring it in and look at it, and i would still have to pay. I had the same problem with my 2010 Impala.

Why is the service airbag light not working?

Service airbag light could be because of the battery power. Need help how to repair. Going to clean positive cable and connections to battery myself. Clicking this will make more experts see the question and we will remind you when it gets answered.

What does the diagnostic warning light on Chevy Impala mean?

Every time you start your Chevy Impala, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.

Why does the airbag light stay on?

Light stays on and warning for airbag service on reader board. If the airbag light stays on after it completes it’s “check light” process then there is a fault in the air bag system. It could be anything from a bad sensor (there are 3 of them) to a wire that has become unplugged. This problem should be repaired as soon as possible because…

What is service air bags?

The service air bag message is the indicator that the system has detected a fault in the air bag system and is there to inform you that you need to get that issue repaired to restore the air bag system to proper operating condition. There is no way to tell without getting the airbag system scanned to know what that issue it.

Why is my airbag light on?

When your Airbag light appears on your instrument cluster, it means that there is an error in your airbag system. It could be everything from a damaged airbag, broken wires, bad connections or a faulty control unit.

Can you reset airbag light?

You can reset the airbag light on your vehicle from your home garage, saving yourself a trip to the dealership or mechanic. The airbag light, also known as the SRS light (supplemental restraint system), illuminates on the vehicle’s instrument panel usually only after the vehicle has been in an accident and the airbag has deployed.

What does it mean when your airbag light is on?

All the same, the most important thing to know is that, an illuminated airbag light indicates a problem in the SRS system. This means that airbags might not deploy in the event of an accident. Here are the common reasons that cause your airbag light to illuminate; 1. Airbag Clock Spring Damage

What does the airbag light on a Buick Enclave mean?

Depending on the model year and what country you happen to be in, you may get something along the lines of SRS, a picture of a person with the airbag deployed, or the word airbag. All of these should be treated as the airbag light.

Is it safe to drive with the airbag light on?

The airbag system has saved countless lives since its invention. If you do drive with your Impala’s airbag light on, you are relying solely on the safety belts to keep you safe, which is not as safe.

Why does my airbag light keep coming on?

The seat sensors tell the airbag system that the seat is occupied. Some older model vehicles have a manual button to turn the passenger airbag on or off. Look under the seats to see if you can find any part of the wiring harness that has come dislodged or damaged. This is a very common reason why the airbag light comes on. 3. Airbag Itself

Why does the airbag light stay on in my car?

Two possibilities include damaged wires or low voltage. While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident. Don’t ignore the airbag light.

Where is the airbag code on a 1996 Chevy?

If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.

How do I Turn Off the GM airbag light?

Use the arrow keys on the face of the scan tool to navigate the menu. Select “Body Control Module,” then “Codes,” then “Clear All Codes.”. This will turn off the airbag light on the GM’s instrument panel. Unplug the computerized scan tool and start the engine.

How to reset Chevrolet airbag codes without expensive?

It is very easy procedure. If you need help follow this guide on how to diagnose Chevrolet airbag light yourself. Airbag light cannot be reset by disconnecting the battery. In case there is a short, it will often reset on its own if the short is fixed. Highly active question. Earn 10 reputation in order to answer this question.

Where is the service air bag light on my Impala?

My dash keeps displaying Service Air Bag, and tripping on the red air bag light that comes on with initial start up. Sometimes it goes off and clears itself. Other times it will remain on until I turn the car off and back on.

How often does the air bag go off on an Impala?

Sometimes it goes off and clears itself. Other times it will remain on until I turn the car off and back on. Of course it only does it when it wants to. It came on when i test drove it, so i had the dealer note it as something they would fix before we made the deal.

Why does my GM airbag light come on?

The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear. GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)

Is there a light bulb leak in my Chevy Impala?

Check engine there is a large evaporative leak. keep away form ottozoo, they dont have the brain power to actually diagnose a light bulb., their job is to sell parts., if they sell you the wrong parts tough.Take it to a qualified repair shop that does a lot of GM work or the dealer. You can’t post conmments that contain an email address.

How do you turn off the airbag light?

The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.

When does the GM airbag light come on?

The airbag light, or SRS (supplemental restraint system) light, on the GM dashboard shines whenever there is a malfunction with the airbag deployment system. The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag.

What should I do if my airbag sensor goes out?

You will need to wait for at least five seconds to pass. Once it has, you are ready to reconnect the negative terminal. Make sure that the sensor reset by turning on the key switch in your vehicle. If the airbag sensor warning light has gone out, it has been reset. If you find that the light has not gone out, repeat the previous steps.

Is there a way to reset the airbag light?

The airbag light will often go away by itself after repairing the problem, but not in all car models. After you have installed the new parts and are 100% sure that the parts are installed correctly, it’s time to reset the engine light. To do this – you need to use an OBD2 scanner, and it’s not possible in another way.

How to reset the airbag light on Chevy Impala?

You can’t post conmments that contain an email address. Try under the dash, attached to colum is a switch that the rod goes into from your ignition key switch, that may need to be adjusted tword your steering wheel just a touch, they go out of alignmnet from time to time You can’t post conmments that contain an email address.

How can I reset the airbag light on my car?

Repeat the first few steps two more times and you will see that you have reset the airbag light on the dash. You will know that it is reset once the light comes on and turns off. It will not flash. And that’s how you reset an airbag light. If only all your DIY projects could be this easy.

What should I do if my airbag light keeps flashing?

Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube

When do you see the airbag light on?

When the airbag system fails this check, you’ll see the airbag light. Depending on the model year and what country you happen to be in, you may get something along the lines of SRS, a picture of a person with the airbag deployed, or the word airbag. All of these should be treated as the airbag light.

Why does my airbag light flash on and off?

After continued use, the thin circuit bands that make up your airbag clock spring may become brittle or worn out. This leads to a sporadic connection of your driver’s airbag. If this is the case, the system will send a code to your computer and the airbag light will turn on or flash.

What happens if you reset the airbag light?

You should never just reset the airbag light without repairing the problem. This can deploy the airbags or non-functioning if an accident occurs. Let a professional replace the airbag’s parts if you are not sure of how to do it. Remember always to remove the battery connection when working with airbags.

Why does the airbag light come on after an accident?

It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired.

Check the airbag switch for passenger Some cars have a “passenger seat Airbag on/off button.” This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars.

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

What should I do if my airbag light comes on?

Once you’re in an accident which causes the airbags to deploy, simply replacing the airbag is not enough. Crash sensors, seat belt pretensioners, and other SRS components must also be replaced. In addition, the airbag monitoring unit (the brains of the airbag system) will need to be reset.

What happens if the airbag light stays on?

While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident. Don’t ignore the airbag light. Get the airbag system diagnosed as soon as possible.

Why does my airbag light turn off after a crash?

The SRS system has a backup battery that steps in during a crash. This battery is charged by the main car battery. When the main battery discharges, the backup battery also discharges. This might cause the airbag light to appear. As you might have guessed, charging or replacing the battery solves this problem and the airbag light will turn off.

How long does the airbag light stay on?

To start the process get your watch ready and turn the ignition switch from “Off” to “On.” Once the airbag light comes on it will stay on for a total of seven seconds. Once it turns off, you will have a second to turn the ignition back to “Off.” After you have the ignition off for three seconds, you will need to turn the key back “On.”

Why does the airbag light stay on on a Chevy Impala?