Most popular

Why does my headlight not pop up on my Corvette?

Why does my headlight not pop up on my Corvette?

It can only be one of two things. The headlight module (which is located just below the passenger’s headlight) or the gear that is in the headlight motor. Check the headlight connector and the ground in that area also. Here, have a look at this thread. This is an easy fix follow junkmans diy you will be good to go:banana:

Where is the headlight located on a corvette?

Click to expand… Hell no, don’t take that to the dealer! It can only be one of two things. The headlight module (which is located just below the passenger’s headlight) or the gear that is in the headlight motor. Check the headlight connector and the ground in that area also. Here, have a look at this thread.

How much does it cost to fix a headlight on a corvette?

Now here’s the deal. You just fixed something that would have ran you anywhere from $250 – $300 in parts and God knows what they would have charged you for labor. Had you screwed it up and had to have them still fix it, the price would have been the same.

Where is the Horn relay switch on a 1994 Corvette?

I’d like to know were the horn relay switch is on my 1994 Corvette. When you start out cold in open loop, everything is perfect, once its in cosed loop its ok for a few minutes then will start to run ruff and then kick … switches! what is the function of the switch on the right of the headlight switch.

How to fix C4 Corvette headlights that wont go up?

How to fix C4 Corvette Headlights that wont go up or down. This video will show you how to take off the headlight assembly, take off the headlight motor, and change out your worn gear with a nice new one If your headlights are not going up, or it goes up but easily falls back down, this is what you need to do to fix it.

What’s the problem with my 1989 Corvette Vette?

No noticeable performance issues, the light just comes on, it … The top on my 1989 Vette won’t release when I pull the release handle. It comes open on the passenger side but not the driver’s side. What can I do?

I’d like to know were the horn relay switch is on my 1994 Corvette. When you start out cold in open loop, everything is perfect, once its in cosed loop its ok for a few minutes then will start to run ruff and then kick … switches! what is the function of the switch on the right of the headlight switch.

What does low fuel warning light mean on C4 Corvette?

I have a 1990 C4 Corvette and while driving on the freeway at freeway speeds the service engine light comes on and if I let off the gas for a little while … 1988 Vette Fuel Low Level warning light stays on. Fuel Gauge started to act up with low fuel warning light staying on even though tank is full.

Why does my headlight not open when I pull the switch?

So if your headlight doors won’t open when your headlight switch is pulled then either the small hose has come off the actuator valve or the center supply hose has come off the actuator valve or one of the big hoses has come off the actuator valve or one of the pots.

Why are the headlights on my Corvette not opening?

When the engine is running vacuum keeps the headlight doors closed. When you turn on your headlight switch it sends vacuum through the small hose to the end of the actuator valve……….which then shifts the spool inside and re-routes the vacuum to the other side of the headlight pots.

So if your headlight doors won’t open when your headlight switch is pulled then either the small hose has come off the actuator valve or the center supply hose has come off the actuator valve or one of the big hoses has come off the actuator valve or one of the pots.

Now here’s the deal. You just fixed something that would have ran you anywhere from $250 – $300 in parts and God knows what they would have charged you for labor. Had you screwed it up and had to have them still fix it, the price would have been the same.

What to do if your headlight won’t pop up?

The other night, my headlight wouldn’t pop up. I opened the hood and cranked it up by hand, but had to crank it back down when I got home. Can I fix this myself (I’m no mechanic)? or do I take it to the dealership??

Is there a C5 headlight pop up problem?

ACE Recommendations & Endorsements C5 headlight pop up problem By 1jester, August 31, 2011in Service & Repair Share More sharing options… Followers0 Reply to this topic Start new topic Recommended Posts 1jester Posted August 31, 2011 1jester Members 1.4k Share Posted Au

What to do when your headlight pop up?

Try this…..go into the DIC settings and turn the twilight function on. That is, let the light level and the computer turn the lights on. If the lights flip up without a problem then its the switch I have some experience with scary lookin holes. Ya, be sure it’s the gears before you haul off and order new ones. Suck it up, Buttercup!

It can only be one of two things. The headlight module (which is located just below the passenger’s headlight) or the gear that is in the headlight motor. Check the headlight connector and the ground in that area also. Here, have a look at this thread. This is an easy fix follow junkmans diy you will be good to go:banana:

Click to expand… Hell no, don’t take that to the dealer! It can only be one of two things. The headlight module (which is located just below the passenger’s headlight) or the gear that is in the headlight motor. Check the headlight connector and the ground in that area also. Here, have a look at this thread.

How long does it take to repair a corvette headlight?

Our project 73 had one headlight that always had been very slow to open so we contacted Zip Corvette Parts and they supplied us with two new actuator front seals and a complete set of Corvette Color Coded Vacuum Hoses. The whole repair took less than two hours and only normal hand tools are needed.

Where can I repair the headlight wiper on a corvette?

If you need to repair your Corvette’s entire vacuum system instead of just the headlight/wiper door system, you can get a complete Corvette Vacuum System Overhaul Kit from Zip Corvette Parts, which includes all hoses and connectors for the entire C3 Corvette.

Where is the hodacm switch on a corvette?

Headlamp Opening Door Actuator Control Module (HODACM) located front RH side below the RH headlamp assembly. Headlight Switch located on the steering column. Underhood ELE Center (UEC) located RH side of engine compartment, between the wheelhouse and the dash panel, front of the battery.

What happens when both headlights stop working at the same time?

You may destroy, or drastically shorten the life of, your good bulb. When both headlights stop working at the same time, the bulbs usually aren’t at fault. The main exception is when one headlight burns out first, goes unnoticed for some time, and then the other bulb also fails.

How do you remove a headlight assembly bracket?

If you have to remove any bolts from a headlight assembly bracket, make sure to keep them someplace safe until you reassemble that portion of the car. In some vehicles, you will need to unbolt the headlight assembly and slide it out of the car to access the headlight bulb itself in the back. Disconnect the wires going to the headlight.

Why are the headlights not working on my Chevy?

Chevy, 2007 1500P/U, 130,000, V8. The headlights won’t come on when the switch is turned. The daytime running lights seem to work fine. I have checked the fuses and they seem to be o.K. I have changed out the light switch but it did not help.

Why does the driver’s side headlight keep burning out?

High beams and running lights are fine. Replaced the driver’s side headlight and the regular light keeps burning out. High beams and running light are fine. Passenger’s side works fine.

What should be the voltage of a headlight?

It should not be over 14.5 volts. If it is too high, the excess voltage is causing the bulb to “pop”. The last thing you should consider is the quality of the bulb and the place you are getting them.

The other night, my headlight wouldn’t pop up. I opened the hood and cranked it up by hand, but had to crank it back down when I got home. Can I fix this myself (I’m no mechanic)? or do I take it to the dealership??

How to repair a headlight activator rod in a corvette?

Clean them in a mild detergent and then put some kind of rubber preservative on them. This way they will stay supple and be reusable. If the dust shield is torn or ripped, new Corvette headlight activator rod boots are available from Zip Corvette Parts: 1968-1982 Headlight Actuator Dust Boot

Our project 73 had one headlight that always had been very slow to open so we contacted Zip Corvette Parts and they supplied us with two new actuator front seals and a complete set of Corvette Color Coded Vacuum Hoses. The whole repair took less than two hours and only normal hand tools are needed.

Where are the headlights on a C4 Corvette?

When you pop the hood open, you can easily see the headlights on the front two corners of the car. They are in the down position and are upside down now.

Why does my 1987 Corvette not start up?

The sealant between the filter and the fuel line is not complete and will cause loss of fuel. If the leak occurs toward the engine, a fire can result. Honeywell will contact owners and replace the fuel filter. There have been various indications that the 1987 Corvette had starting problems.

When did my C4 Corvette headlights stop working?

This is the process I used to repair my 1996 Corvette when its headlights stopped working. This is a C4 Corvette, so its dates range from 1983 to about 1996 if I am not mistaken.

This is the process I used to repair my 1996 Corvette when its headlights stopped working. This is a C4 Corvette, so its dates range from 1983 to about 1996 if I am not mistaken.

Clean them in a mild detergent and then put some kind of rubber preservative on them. This way they will stay supple and be reusable. If the dust shield is torn or ripped, new Corvette headlight activator rod boots are available from Zip Corvette Parts: 1968-1982 Headlight Actuator Dust Boot

When did the headlight on my Corvette stop working?

Both headlight assemblies work like they originally did and our Corvette stopped winking at us.

How to repair a headlight vacuum system in a corvette?

Hold the shaft firmly in place below the threads and twist off the receiver. It is a good idea to count the number of turns it takes to remove the receiver nut. This way you will be able to return it to the same place on the actuator rod. 07: Carefully remove the rod dust shield.

Why does my 1980 Corvette not turn over?

She always started right up until it got wet. Turns over strong sprayed ether in carburetor she wants to rip but it’s just shy of catching did have … 1980 corvette battery tests that it is good, but the car will not start or turn over. new gauges for 1975 vette don’t seem to work properly. Bought new gauges for my 1975 vette from Ecklers.

Author Image
Ruth Doyle