Most popular

Why does my GM car make a clunking noise?

Why does my GM car make a clunking noise?

If you aren’t really sure how to check your GM vehicle’s suspension system for the noise that you know is coming from “somewhere up there”, go ahead and bring in your car at anytime. We’ll be able to diagnose and fix your front end clunking quickly and efficiently.

What kind of noise does front suspension make?

Noise in front suspension ( 05′ z71 ) when turning wheel to the left. Major Vibration?!?!

What causes a howling noise in the rear of a car?

Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading

Why does my Left Front Wheel Make a clicking sound?

If the left front wheel is making the clacking or clicking sound, bingo! Do the same exercise for the right side. If you notice a heavy vibration on the steering and a slight whining sound coming from more the center of the vehicle, you might have to have your inner CV joint inspected.

Why does my Chevy Silverado make a constant noise?

Driving down the highway about 65 when this sound showed up and is now constant. Left front axle. Sounds like the end attached to the differential. I don’t think it’s the CV – I’m familiar with the sound of failure from those on other vehicles. The sound is clearest at :38, 1:20, 2:00 and 3:49 in the video.

Why does my GM Truck make a popping noise?

Noise sounded like it was coming from the front passengers side so I changed the cv axle, but the noise persists. Noise does not seem to occur when the truck is in neutral and rolling, but as soon as you put it into gear it begins to make the popping noise.

Noise in front suspension ( 05′ z71 ) when turning wheel to the left. Major Vibration?!?!

Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading

What causes the front end of a car to clunk?

Front end suspension is always taking some extreme abuse from pot holes and poorly maintained road, so it will probably require some adjustment at times. Letting it go may only create problems in the future. ← Have you thought about using your car alarm for home protection?

Why does my Pontiac G5 make a noise?

This noise will typically occur when the front suspension is returning to the upward position after a hard downward stroke, such as after driving through a large rut or pothole. This condition may be caused by the jounce bumper slamming into the upper spring seat because it is not retained in the correct up position.

What can I do about clunking sound from front suspension?

1. Clean the surface area of the upper spring seat using fine sandpaper. 2. Apply a light coat of automotive adhesion promoter to the top of the dust boot (shield) on the inside edge and to the top of the bumper. Allow to dry 10 minutes.

What makes a car clunk when going over a bump?

Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. The bushings are designed to dampen any noise that might be created when your vehicle goes over a bump.

Why is my front end clunking on the road?

We’ll be able to diagnose and fix your front end clunking quickly and efficiently. Front end suspension is always taking some extreme abuse from pot holes and poorly maintained road, so it will probably require some adjustment at times. Letting it go may only create problems in the future.

What makes a rattling noise in the front end?

Rattling, Clunking Noise in Front End: This Noise Is Driving Us This noise is driving us bonkers. When we hit a rough place in the road, the front end rattles or clunks. If we are on a gravel road, the nose is horrible. Sounds like the front end is falling out. We replaced stabilizer links, but no improvement. New struts did not help, either.

What could be causing the front end making noise?

Front end grinding noises while the car is in motion are a symptom of a mechanical malfunction or failure that demands inspection. Diagnosing the problem is a matter of inspecting certain parts of the car that are the common cause of front end grinding noises.

What else can clunk in the front end?

There can be 5 things that can cause a front end clunk. ball joints. tie rod. sway-bar links. shocks. shock mounts. Take a look at the video below for a quick explanation how each of these components can be the culprit of causing that front end clunk.

What is the knocking noise under front side while driving?

Because they’re under a lot of stress when it comes to balancing the weight of your vehicle from one side to the other they’re prone to breaking. When the sway bar does break it could lead to a knocking sound that you hear at the front of your vehicle.

Why is my car is making a clunking noise?

Possible Causes Of Your Car Making Clunking Noises. There are many different things that could be causing your car to make clunking noises. These include: engine. transmission. tires. shock absorbers. ball joints.

Why does my Mercedes Benz suspension make a creaking noise?

These forces can be extreme and cause the rubber bushings to fatigue and crack causing a front-end vibration or shimmy. Signs of failure are common and are often accompanied with a “creaking” noise from the suspension.

Why do I Feel Like I’m Floating?

Imbalance or Floating Feeling Symptom, Causes & Questions The floating sensation or feeling unbalanced is often associated with vertigo or an inner ear infection that can cause imbalance. Other causes of a floating feeling include atrial fibrillation or temporomandibular joint dysfunction disorder.

Why does my front end make a squeaking noise?

That is the large bar going across the car linking the left and right suspension to one another. There are 2 rubber bushings attaching the bar to the frame out toward the ends. One or both are likely very dry. Spray silicone spray on the bushings and bounce the car up and down to work it in.

Why does my steering wheel squeak when I turn over a bump?

If it happens to be loose or damaged, it will cause a squeaking noise whenever you turn or go over a bump. However, pinpointing the squeak from the steering wheel is hard when you’re driving, so try to listen for it carefully to make sure where the noise comes from.

What should I do if I hear a squeaking noise in my car?

What I’d do first in that case, if I had this problem, is find somebody strong enough who can push down forcefully on the driver’s side front bumper while you sit in the car in the driver’s seat and listen. Do it both with the engine off, and w/the engine running. Still don’t hear it?

How can you recognize suspension squeaks while driving over bumps?

How Can You Recognize Suspension Squeaks? If you drive on a bumpy road, or even if you happen to go over a speed bump, your car might make a quick creaking noise when it goes over the uneven section . Obviously, this is quite an embarrassing thing for a driver since most people on the street will turn around reflexively.

Why does my tie rod make a clunking noise?

You can also test your upper ball joint by squeezing it with a wrench. If it moves up and down like the one in our featured video does, that can cause a clunking noise and needs to be replaced. Inspect your outer tie rod ends

Why does my TV make a clunk when I turn it on?

There can be 5 things that can cause a front end clunk. Take a look at the video below for a quick explanation how each of these components can be the culprit of causing that front end clunk. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

If you aren’t really sure how to check your GM vehicle’s suspension system for the noise that you know is coming from “somewhere up there”, go ahead and bring in your car at anytime. We’ll be able to diagnose and fix your front end clunking quickly and efficiently.

We’ll be able to diagnose and fix your front end clunking quickly and efficiently. Front end suspension is always taking some extreme abuse from pot holes and poorly maintained road, so it will probably require some adjustment at times. Letting it go may only create problems in the future.

There can be 5 things that can cause a front end clunk. Take a look at the video below for a quick explanation how each of these components can be the culprit of causing that front end clunk. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

What does it mean when your car makes noises?

If you own a car, it probably makes noises you can’t identify, but would love to fix. Car noises are not just annoying: sometimes they are a warning sign, like the calm before a storm. Here are the four car noises customers most commonly complain about.

Why does my car engine make a squeaking noise?

Engine belts can create a loud, high-pitched squeak or squeal that will drive you and your neighbors crazy. Some engine belts only squeak after you go through a large puddle or if there is heavy moisture in the air, and others squeak constantly.

Why does my Dodge Caravan make a whining noise when accelerating?

A whining sound when accelerating is almost always caused by a bad accessory attached to your Caravan’s engine. Here are the most common causes of whining noises when accelerating: 1. Bad Alternator When an alternator is going bad, it’ll often begin to put out a high pitched whining sound. It should also be accompanied by the battery light.

What causes a clunking noise on the driveline?

Cause: Bad wheel bearings Noise: Driveline squeaking or grinding at any speed Cause:Worn or damaged U-joints Noise: Clunking when depressing the throttle pedal (takeoff) Cause:Worn U-joints; worn spider gears; worn axle splines; excessive gear backlash; loose yoke splines; worn slip yoke splines Noise:Clunk immediately after taking off from a stop

What causes a low pitch noise when accelerating?

Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling after gear set installation Cause:Faulty gears or improper installation Noise:Low-pitch rumble at all speeds over 20 miles per hour Cause:Worn carrier bearings

Why do I hear a knocking noise in my engine?

When your engine is running smoothly, the air/fuel mixture burns up in a single, controlled detonation inside each cylinder. Detonation knock is a knocking noise that you’ll hear when the air fuel mixture in the cylinders is detonating in more than once place at a time.

Why does my car make a squeaking noise when I put on the brakes?

The best way to avoid this type of noise is to choose quality brake pads. If your brakes are squeaking or squealing while driving down the road, but the noise goes away when you press on the brakes, I have a hunch that your brake wear indicator is hitting the rotor and causing the noise.

Why does my car make a thumping noise when I drive?

It’s not a ticking or hard knocking noise. Also, the noise is variable depending on the speed AND the duration of noise is also speed dependent (going slow, the thump is drawn out. Going faster, the thump duration is shorter.) Here’s what I have done so far but the noise is still there. Rotated both front tires to rear

What causes a Dodge Durango to not start?

Another common problem specifically impacts Dodge Durango vehicles with the 5.7-liter V8 engine. On these, the Camshaft position sensor occasionally fails, causing the engine to stall or not start.

How much does it cost to repair a Dodge Durango?

RepairPal estimates the repair costs at $642-$845. Dodge Durango drivers also occasionally report water passing through the windshield’s cowl screen during heavy rainstorms or when going through a car wash, generally causing the Check Engine light to illuminate.

Is the Dodge Durango the most sought after SUV?

Dodge may not be the most sought-after automaker when it comes to SUVs, with several of its offerings — such as the Journey — receiving highly critical reviews. The Dodge Durango, however, is a slightly different story.

How much does it cost to fix a broken exhaust manifold on a Durango?

While these Dodge Durango problems are inconvenient and frustrating, most of them are fortunately not too serious. Besides the high price of repairing a broken exhaust manifold bolt, RepairPal estimates repair costs for all of these issues at around $100.

Why does my rear suspension make a knocking noise?

There are several things that could be causing the knocking sound from the rear suspension. My first guess was worn out bushings allowing metal-to-metal contact, broken sway bar end-links, or worn out shock mounts (top or bottom). If you can, pop the rear tire off and inspect the suspension mounts for cracked rubber or worn out parts.

How to troubleshoot a clicking or popping sound in car?

Turn the wheels from lock to lock going from right to left. This will check to see if the bearing plates will make a clicking or popping noise while the vehicle is stationary. Step 3: Drive the vehicle around the block. Make turns where you can turn the steering wheel all the way in a direction.

Turn the wheels from lock to lock going from right to left. This will check to see if the bearing plates will make a clicking or popping noise while the vehicle is stationary. Step 3: Drive the vehicle around the block. Make turns where you can turn the steering wheel all the way in a direction.

1. Clean the surface area of the upper spring seat using fine sandpaper. 2. Apply a light coat of automotive adhesion promoter to the top of the dust boot (shield) on the inside edge and to the top of the bumper. Allow to dry 10 minutes.

Front end suspension is always taking some extreme abuse from pot holes and poorly maintained road, so it will probably require some adjustment at times. Letting it go may only create problems in the future. ← Have you thought about using your car alarm for home protection?

Why does my car make a clang noise when I Jack it up?

Almost ringing “Clang” or “Tang” or “Clung” sounding noise, over large bumps and/or when jacking up the car and unloading the suspension. Springs – inspect the springs for cracks and breakages. Make sure you look carefully in each spring seat (top and bottom) to see if the spring has broken at the end.

When did the new Ford Ka come out?

The exciting new Ford Ka is stylish, modern and great fun to drive. It replaces the iconic original Ka, which brought new levels of style and enjoyment to the small-car market when it was launched in 1996.

What causes a clunk when taking off from a stop?

Noise:Clunk immediately after taking off from a stop Cause: Worn slip yoke splines Noise:Steady vibration that increases with speed Cause:Worn U-joint or out-of-balance driveshaft Noise:Cyclic vibration that varies in intensity. Intensity increases at a specific speed range, worsens during deceleration

Is there such a thing as a clunk?

FYI the other “CLUNK” threads have been merged with this thread. We absolutely want to hear about member’s CLUNK issues and resolutions but we don’t need several threads on the topic! Thanks- BIRDMAN So by now, most have heard of this horrific and potentially life threatening issue called H.I. ……er, The Clunk.

Why does the clutch make a clunking sound when shifting gears?

In other words, when you engage a gear, there is a moment where the smaller internal gear is seperated from the actual Flywheel, then the clutch engages to the flywheel, the flywheel spins, and smacks the gear attached to the output shaft. This is its designed function.

Why does my Ford Fiesta make a clunking sound when shifting gears?

If the clunk is harsh whilst shifting it’s the RMM, if it’s not harsh while shifting then it’s something else but the OEM “rear motor mount”, which is really a roll resistor, is almost a mandatory upgrade because the OEM one is so flimsy and lets the engine move wildly all over the engine bay under load. Check out this video I made about it.

Author Image
Ruth Doyle