Where is the blend door actuator on a Dodge Ram?

Discussion in ‘ Interior ‘ started by outkast, Nov 26, 2015 . I have a clicking noise coming from my dash and the heat on the passenger side doesnt blow as hot as the driver side.

Where is the fuse box in a Dodge Durango?

Fuse box in passenger compartment Dodge Durango. fuse box location. The junction block is located in the end cover at the left side of the instrumental panel. fuse box layout. type 1. Headlamp Switch, Overhead A/C Control, Instrument Cluster, Radio, Rear Wiper/Defogger Switch, Ash Receiver Lamp & A/C-Heater Control

What happens when you replace the actuator on a blend door?

Once all of the mounting screws have been removed the actuator should become loose. Grasp the actuator and pull it from its mount to remove. Before installing the new actuator it’s a good idea to manually turn the blend door in both directions to ensure it is not stuck which will cause the new actuator to fail.

What does the blend door do on a Dodge Ram?

The blend door’s function is to divert some, or all, of the air flow through the heater core. The RAM uses an odd, complex method with two blend doors. The heater core is on a horizontal plane and two doors are sandwiched on the top and bottom of the core.

How can I tell if my blend door actuator is bad?

To test the blend door operation and too double check that you are changing the correct actuator motor turn the blower motor on and work the door in each way. You will be able to feel the air change temperature or vent level. Compare the bad actuator to the new unit.

How does an air blend door actuator work?

An air blend door actuator is constructed from a plastic housing, a small electric motor and a plastic gear set. A door position sensor is also incorporate into the unit to send feed back information to the climate control computer.

Is there a HVAC blend door repair kit?

This HVAC blend door repair kit is designed to match the original components required to repair the blend door on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Is there a HVAC repair kit for a Dodge Ram?

This kit will replace all 5 doors in the HVAC box with CNC machined solid aluminum replacements. This kit includes a Recirculation Door, 2 Blend Doors, a Panel/Floor Door, and a Defroster Door. You can finally permanently fix your heater and your AC doors in your Dodge Ram truck!

What kind of door does a Dodge Ram have?

This kit includes a Recirculation Door, 2 Blend Doors, a Panel/Floor Door, and a Defroster Door. You can finally permanently fix your heater and your AC doors in your Dodge Ram truck! This kit will fit 2002, 2003, 2004, 2005, 2006, 2007, and 2008 Dodge Ram 1500 trucks.

What does a blend door do on a ram?

Blend Door. The blend door’s function is to divert some, or all, of the air flow through the heater core. The RAM uses an odd, complex method with two blend doors. The heater core is on a horizontal plane and two doors are sandwiched on the top and bottom of the core.

Where is the mode door actuator on a Dodge Ram?

The single mode door actuator is located on the driver side end of the heater-A/C housing unit, close to the top of the distribution housing. The mode door actuator is mechanically connected to the mode door. The mode door actuator is interchangeable with the actuators for the blend air door (s) and the recirculation air door.

How can I tell if my blend door is bad?

In the case of the Air Conditioner, if the coolant is low, you can usually tell. Turn the air conditioner on full blast with the engine cold. If the air gets hotter as the engine warms up, you know that it is a blend door issue. If it blows warm from the time you turn the engine on, that would indicate that the A/C system is malfunctioning.

What are the symptoms of a bad blend door actuator?

Here are some of the most common symptoms that a blend door actuator has gone bad: 1. Clicking Sound If you hear a repeated light clicking sound coming from under the dash, it can be a bad blend door actuator. Often, adjusting the temperature settings ever so slightly can stop the noise temporarily.

How is the mode door actuator connected to the blend door?

The mode door actuator is mechanically connected to the mode door. The mode door actuator is interchangeable with the actuators for the blend air door (s) and the recirculation air door.

Where are the blend doors on a Dodge Ram 1500?

I need a diagram of blend door locations on 2013 Dodge Ram 1500. I was told there is 5 1500: I need a diagram of blend door locations on 2013 Dodge… Last winter I smelled the pancake syrup smell, but the heat was still working (passenger side only).

Where is blend door actuator on 1998 Ram 1500?

The electronic blend door actuator is located left of the blower motor on the bottom of the HVAC central housing unit (big black box under passenger side dash).

Why is my Dodge Ram not blowing cold?

These are a few of the most common issues that could cause your Ram to not blow cold enough. There are other issues that can cause this as well. Most of the time, when your Ram’s air isn’t blowing cold enough, it is going to be a lack of refrigerant causing the problem.

Why is the air conditioner not working on my Dodge Ram?

Blower Motor – If there is no air blowing from your Ram at all, the blower motor is at fault. They are not that expensive and are easy to replace (most of the time). Blend Door – The blend door controls how much air conditioned and heated air enters the cabin. If it gets jammed or locks up, your Ram can’t respond to your temperature change request.

Where is the blend door actuator on a Dodge Ram?