Where does the p0356 ignition coil come from?

One is a battery feed usually from the power distribution center. The other wire is the coil driver circuit from the PCM. The PCM grounds/ungrounds this circuit to activate or deactivate the coil. The coil driver circuit is monitored by the PCM for faults If an open or a short is detected in the driver circuit for coil #6, a P0356 may set.

What is the other wire on a p0354?

The other wire is the coil driver circuit from the PCM. The PCM grounds/ungrounds this circuit to activate or deactivate the coil. The coil driver circuit is monitored by the PCM for faults If an open or a short is detected in the driver circuit for coil #4, a P0354 may set.

What causes a p0357 code on a cop?

Potential causes of a P0357 code include: Short to voltage or ground on COP driver circuit Open on COP driver circuit Loose connection at coil or broken connector locks Bad Coil (COP) Faulty Powertrain Control Module

What are the codes for Ford E350 ignition coil?

My ford e350 2001 has these codes p0171 p0351 Ignition coil A primary/secondary circuit p0352B p0353C p0354D p0355E p0356F p0357G p0358H I take this to mean all my cop’s are bad… First signal I got was PO308. I changed all the coils and all the plugs. Now I get PO358. Where do I go from here?…

What does p0356 mean on a check engine light?

P0356 is a diagnostic trouble code (DTC) for “Ignition Coil F Primary/Secondary Circuit Malfunction”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic.

What causes a p0353 code on a cop?

Potential causes of a P0353 code include: Short to voltage or ground on COP driver circuit Open on COP driver circuit Loose connection at coil or broken connector locks Bad Coil (COP) Faulty Powertrain Control Module

What are the symptoms of a p0356 DTC?

If an open or a short is detected in the driver circuit for coil #6, a P0356 may set. Also, depending on the vehicle, the PCM may also shut down the fuel injector to the cylinder also. Symptoms of a P0356 DTC may include: Potential causes of a P0356 code include: Short to voltage or ground on COP driver circuit

What are trouble codes for Jeep Laredo 4.0?

2000 Jeep Grand Cherokee Laredo 4.0 showing trouble codes: P0302, P1391, P0353, P0352, P0351. We originall had only P0302 so we changed plugs, wires, coil, cam and crank sensors, and checked injectors. Now we have all the other codes listed above.

What does the p0353 code stand for?

All our repairs are backed by our 12-month / 12,000-mile warranty. The P0353 code is a generic powertrain code related to the ignition system or an engine misfire. In this case, a malfunction has been found specifically in ignition coil C (or number 3) in the primary or secondary circuit. Codes related to the P0353 include:

What does the code p0356 mean on a coil?

For example, P0351 indicates a fault in the #1 cylinder coil circuit. Likewise, P0358 indicates a problem with the coil circuit on cylinder #8. We’ll let the variable x stand in for the last digit throughout this article, as troubleshooting is the same for each of these codes. What are the common causes of code P0356 ?

What does p035x stand for on a check engine light?

In addition to an illuminated check engine light, the most common symptom is an ignition misfire. Often, P035x codes will also be accompanied by a misfire code (P0300-P0308). How do you troubleshoot code P0356 ? The first still is to visually inspect the coil pack and its connector. Look for things like broken wires, corrosion, etc.

What are the common causes of code p0356?

To sum things up, the common causes for code P0356 are as follows: 1 Faulty ignition coil 2 Problem in the ignition coil circuit 3 Problem with the PCM

What kind of ignition coil does a Ford F 150 have?

2004 ford f 150 “new edge” 5.4 3 valve a/t 4×4 supercrew larriet, 112k miles, original spark plugs, already replaced the FPDM in the summer time. The truck would miss once in a great while but never threw a code/check engine light. I chalked it up to me not changing the plugs yet….Im scared of th…

How much does it cost to diagnose the p0356 Ford code?

What does this mean? The cost of diagnosing the P0356 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0356 FORD code detected?

To sum things up, the common causes for code P0356 are as follows: 1 Faulty ignition coil 2 Problem in the ignition coil circuit 3 Problem with the PCM