Where can I find list of Ford differentials?

You can use the social sharing buttons to the left, or copy and paste the website link: https://www.diyford.com/ford-axle-history-identification-ford-differentials/ As part of my research, I went to renowned Currie Enterprises and gathered one of just about every different 9-inch axle variant.

Where are the drain plugs on a 1958 Ford axle?

The 1958s and 1959s have two dimples on either side of the housing and some have drain plugs. The 1960s to 1967s still retain the dimples but also have an oil level plug in the back cover. The Ford 8.8-inch axle has a cast center section and the internal components are installed from the rear.

Where are the Axles installed on a 1967 Ford?

The 1960s to 1967s still retain the dimples but also have an oil level plug in the back cover. The Ford 8.8-inch axle has a cast center section and the internal components are installed from the rear. There is typically a stamped steel cover that must be removed to gain access to the internals.

How big is the pinion on a 9 inch differential?

The 9-inch’s very large pinion offset of 2.25 inches requires the pinion to be straddle mounted, which refers to the fact the pinion head has bearings that straddle it on either side. There is a machined roller bearing race on the pinion head portion that points at the differential opposite the tapered bearing races.

How to rebuild 8.8 and 9 inch differentials?

This Tech Tip is From the Full Book, FORD DIFFERENTIALS: HOW TO REBUILD THE 8.8 AND 9 INCH. For a comprehensive guide on this entire subject you can visit this link:

Are there different model codes for Ford axles?

The axle model codes are interchangeable, typically the suffixes are different for a revision change but the axle is still interchangeable with one having the previous suffix. There may be a second dash and more numbers and letters on the top row if there are specifics that are unique for interchange information.

What kind of differential does a Ford F-350 have?

The 1999-2003 Powerstroke equipped F-250 and F-350 trucks featured a Dana 60 assembly up front and either a Dana 80 or 10.5″ out back. The 10.5’s were reserved for single rear wheel (SRW) applications, where the larger 80 was used in all duallies (DRW).

What kind of axle does a Ford F250 have?

1999 to 2002 FORD 4×4 Super Duty F250, F350 DANA 50 Solid Front with Leaf Springs Yukon YA W46106 Yukon 4340 Chromoly outer stub axle for ’98 and up Dana 50 and ’00 and up Dana 60, 30 spline.

How many F250 differential covers are left in stock?

Only 15 left in stock (more on the way). . Only 2 left in stock – order soon. . Only 9 left in stock – order soon. . . Only 12 left in stock – order soon. . Only 3 left in stock – order soon.

What kind of axles does a 1999 Ford PowerStroke have?

The 1999-2003 Powerstroke equipped F-250 and F-350 trucks featured a Dana 60 assembly up front and either a Dana 80 or 10.5″ out back. The 10.5’s were reserved for single rear wheel (SRW) applications read more Leave it to Dynatrac to re-design and improve on a 20 year old design that is essential to reliable four-wheeling for your SuperDuty.

When did the Ford 7.3L diesel engine come out?

And after that Ford released their first vision of that Navistar 7.3L diesel V8 engine in 1994. The block and heads on the 7.3 Powerstroke were made of cast iron, making them tougher and longer lasting. And Ford’s 7.3L powerstroke diesel was equipped with two overhead valves for each cylinder.

What are the dimensions of a 7.3 Powerstroke diesel?

7.3 Powerstroke Engine Dimensions Spec And the dimensions of the 7.3 L diesel are 34″Lx32″Wx38″H 7.3 Powerstroke Compression Ratio Spec 17.5:1

What kind of differential does a Ford PowerStroke use?

The 10.5’s were reserved for single rear wheel (SRW) applications The 1999-2003 Powerstroke equipped F-250 and F-350 trucks featured a Dana 60 assembly up front and either a Dana 80 or 10.5″ out back. The 10.5’s were reserved for single rear wheel (SRW) applications, where the larger 80 was used in all duallies (DRW).

What kind of axle does a Ford PowerStroke have?

The 1994-1997 Powerstroke equipped F-250 and F-350 trucks featured a Dana 60 assembly up front and either a Dana 80 or 10.25″ out back. The 10.25’s were reserved for single rear wheel (SRW) applicatio read more

This Tech Tip is From the Full Book, FORD DIFFERENTIALS: HOW TO REBUILD THE 8.8 AND 9 INCH. For a comprehensive guide on this entire subject you can visit this link:

What does the number 4l11 mean on a Ford axle?

The code, 4L11, tells us that it is a 4.11:1 ratio with a limited-slip or Traction-Lok differential. It also has a 9-inch ring gear. The axle tag typically has two lines of numbers and letters stamped on it.

Can you upgrade the axles on a Ford F-150?

Upgrading your Ford F-150’s axles with topnotch, ruggedly engineered aftermarket axle parts is great way to make your truck even more capable, versatile, and able to handle any situation that might confront you. Though they usually offer stock fit for convenience, these axles are big jump up from the factory specs.

How big are the axles on a Ford F-150?

All Caps are 1.063-Inch Diameter Enter Your Email to Save Products. Upgrading your Ford F-150’s axles with topnotch, ruggedly engineered aftermarket axle parts is great way to make your truck even more capable, versatile, and able to handle any situation that might confront you.

What are the axle ratios on a Ford truck?

Axle ratios are somewhat limited at this time if you choose to replace with OEM gears: 3.31, 3.55 & 3.73. 4.10s are not available either through Ford or Ford Racing. However some aftermarket gear suppliers may offer additional ratios that Ford does not.

How to rebuild a Ford 8.8 inch differential?

This Tech Tip is From the Full Book, FORD DIFFERENTIALS: HOW TO REBUILD THE 8.8 AND 9 INCH. For a comprehensive guide on this entire subject you can visit this link: SHARE THIS ARTICLE: Please feel free to share this post on Facebook / Twitter / Google+ or any automotive Forums or blogs you read.

When did Ford Explorer get 8.8 inch rear axle?

The 2003-up FX4 (non-Level II) is essentially the same as the 1998-2002 Off-Road except that a regular Ford limited-slip in a regular 8.8-inch was included. Ford Explorer: The 8.8-Inch axle came in Ford Explorers (and Mazda Navajo) in 1990 as a 1991 model year.

What are the gear ratios on an 8.8 inch differential?

Basic Specifications. The 8.8-inch differential feature six gear ratios: 3.08-to-1, 3.27-to-1, 3.31-to-1, 3.55-to-1, 3.73-to-1 and 4.10-to-1, according to Drivetrain. Gear ratios depend on the year and model of the Ford vehicle.

What do the numbers mean on a Ford 8.8 differential?

The Ford 8.8 differential ID tag attached to the differential will tell you the gear ratio, rear end style, and whether it has limited-slip. Also on the tag is an ID number, which, until 1985, included four to five letters and no numbers. Almost all 8.8s – and all post-’86 Ford rear ends – have letters and numbers.

Why do you need an axle assembly exploded view?

These Differential and Axle Assembly Exploded Views are provided to help identify the parts you need by name. We stock nearly all of the Differential Components in both of the diagrams below, with the exception of housings.

How can I tell if my rear differential is 8 inches?

Of course, the simplest way to ensure you have an 8-inch rear is to find the ID tag still attached to one of the differential mounting bolts. Axle codes would be a four- or five-digit letter designation for the top row of numbers on the tag. The second row of numbers indicates the numerical ratio, production date and casting number.

What kind of differential do I need for my Ford truck?

Shop by your differential. Please select a rear end that matches your vehicle below. Ford has a wide range of front and rear ends! We carry everything from the 8″ IFS front end parts, to the large 10.5″ rear end parts for F-Series trucks.

Where can I find list of Ford differentials?