Where are the fuse panels on a Chevy Trailblazer?

Here you will find fuse box diagrams of Chevrolet TrailBlazer 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What was the owner’s manual for the 2002 Chevrolet TrailBlazer?

When did the first Chevy Trailblazer come out?

In this article, we consider the first-generation Chevrolet TrailBlazer, produced from 2002 to 2009.

How do you adjust the driver’s seat in a Chevrolet TrailBlazer?

Adjust the driver’s seat only when the vehicle is not moving. Pull up on the lever located under the front of the manual seat to unlock it. Slide the seat to where you want it and release the lever. Then try to move the seat with your body to make sure the seat is locked into place. Power Seats (If Equipped)

Where are the power seat controls on a Chevrolet TrailBlazer?

If you have this feature, the power seat controls are located on the outboard side of the front seat cushions. Move the front of the seat control up or down to adjust the front portion of the cushion. Move the rear of the seat control up or down to adjust the rear portion of the cushion.

Who is the owner of the Chevrolet TrailBlazer?

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem and the name TRAILBLAZER are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

Are there any accessories for the Chevy Trailblazer?

Coming at you from the finest designers in the game, all of our Chevy Trailblazer accessories and parts are constructed with quality and precision in mind. That means unrivaled durability with the smooth OEM fit to match. Interior, exterior, fashion, protection – it doesn’t matter.

Where can I get a 3rd brake light?

Replacement 3rd Brake Light by Genuine®. When you need a headlight bulb or a stop light switch, you may be tempted to just run down to the local auto parts chain store. But before you waste your time and gas only to find high prices and… Factory Replacement 3rd Brake Light by ULO®.

What are the different levels of the Chevy Trailblazer?

Three trim levels highlight the Chevy Trailblazer: LS (base), LT, and SS. LT is directed to the luxury trim, while the SS as in Chevy tradition, is thought to be the high-performing version of the vehicle.

Why are the headlights on my trailblazer not working?

This 2004 Chevrolet Trailblazer came in with the complaint that neither one of the low beam headlights would work. They both stopped working at the same time. The customer had already paid another shop to have the headlight and dimmer switches replaced. After several days of trying hit and miss diagnosis she called me.

What kind of sensors are on a Chevrolet TrailBlazer?

’05-’09: Cobra Intrusion Sensor Module, Inclination Sensor, Liftgate Module (LGM), Memory Seat Module – Driver ’03-’04 (except Saab): Memory Seat Module (Driver), Memory Seat Module (Front Passenger), Cobra Intrusion Sensor and Inclination Sensor

Where is the fuse block on a Chevy Trailblazer?

Chevrolet Trailbrazer (2003 – 2004) – fuse box diagram Year of production: 2003,2004 Engine Compartment Fuse Block The fuse block is located under the hood in the engine compartment on the driver’s side of the vehicle.

In this article, we consider the first-generation Chevrolet TrailBlazer, produced from 2002 to 2009.

What kind of transmission does a Chevrolet TrailBlazer have?

Transmission, Automatic Transmission Shift Lock Actuator, Engine Control Module (ECM), Powertrain Control Module (PCM), Theft Deterrent Control Module, 1-2 Shift Solenoid (1-2 SS) Valve, 2-3 Shift Solenoid (2-3 SS) Valve, 3-2 Shift Solenoid (3-2 SS) Valve, Torque Converter Clutch (TCC) Solenoid Valve

Where is the neutral switch on an automatic transmission?

The neutral safety switch for an automatic transmission is located inside the transmission case or in the linkage that allows the vehicle to shift gears. This switch prevents you from starting the engine when the transmission is in any gear other than Park or Neutral.

Where is the safety switch on a manual transmission?

Manual transmissions have a similar safety device that is commonly located on the clutch pedal. This ensures that a manual transmission vehicle can’t be started unless the clutch pedal is depressed.

How to diagnose a fuse that keeps blowing?

(EASY) DIAGNOSING A FUSE THAT KEEPS BLOWING, ELECTRICAL (SHORT CIRCUIT, NO START) / ARE YOU SAVED? – YouTube (EASY) DIAGNOSING A FUSE THAT KEEPS BLOWING, ELECTRICAL (SHORT CIRCUIT, NO START) / ARE YOU SAVED?

Where is the 4 wheel drive on a Chevy Blazer?

The problem, as I discovered, was corroded wires in the 4×4 module. The module is located behind the kick panel on the passengers side (see picture below). How did I know this?

What was the problem with my Chevy Blazer?

The wires/plug connector were badly corroded on a few pins — which led to two broken wires (pin #1, grey w/ black and pin #6, orange). OK, so how the heck am I going to fix this?

Where are the fuse panels on a Chevy Blazer?

Here you will find fuse box diagrams of Chevrolet Blazer 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What kind of car is a 2002 Chevy Blazer?

Description: Used 2002 Chevrolet Blazer LS with AWD/4WD, Rear Bench Seats, Sunroof/Moonroof, Power Driver Seat, Trip Computer.

When was the second generation Chevy Blazer Made?

In this article, we consider the second-generation Chevrolet Blazer, produced from 1995 to 2005.

What are the Illuminations on a Chevy Blazer?

Cluster Illumination, Radio Illumination, Heater Lamp, Four-Wheel-Drive Illumination, Chime Module, Fog Lamp Illumination, Rear Wiper Switch, Rear Defog Switch Illumination, Liftglass Release Switch Illumination, Overhead Console Illumination

Why is my defroster on my car not working?

It sounds like a tab came off the defroster which is a common reason for defroster failure. Since I work for a company that makes defroster repair kits, defroster repair accessories and aftermarket defrosters I talk to a lot of customers with this issue.

Is the rear window defogger on my Chevy Impala not working?

Repair manuals and support for cars and trucks manufactured by Chevrolet, a division of General Motors. The rear window defogger on my 2008 Impala is not working. When you press the button to turn it on, it lights up, but nothing happens.

What to do if your rear defroster doesn’t work?

You can test this with the defroster test lamp or an automotive circuit tester. Make sure the rear defroster switch and the ignition key are turned on. Disconnect both wires from either side of the defroster grid and touch one end of your tester to each wire. If the light comes on, you have power.

Why does my defroster not clear the glass?

Wires that attach to the rear defroster tabs: If the wires that connect to the tabs on each side of the heating element are detached or broken, the defroster won’t be able to heat up and clear the glass.

How to replace pulse generator on 2006 Trailblazer?

On my 2006 Trailblazer the wipers went crazy. Wiped whenever they just got the feeling to wipe, so temporarily I had to remove the fuse. As I got the part I realized that I will need a puller to remove the wiper arms. When I ordered a finally got those too, It was a good 40 minutes to replace the pulse generator.

Why is my GM Delco wiper motor not working?

Use only an AC Delco OEM Module. After checking all fuses, relays, pump, wiring, and grounds I concluded that the wiper motor or column stalk was the problem. My research that is was the module was confirmed when my intermittent wipers failed and my wipers still worked. It had to be the module and not the stalk switch.

What to do about a 2004 Chevy Trailblazer?

38 people found this helpful. Did exactly what was suggested by Daniel and ageary63 below for my 2004 Chevy Trailblazer. Removed the fuses (#36 and #39)and then re-inserted them after waiting about a minute. After re-insertion, turned ignition but did NOT start the engine.

How to replace batery and air in Chevrolet TrailBlazer?

Get into your car and turn the key to the on position, ( but do not start it). Let it sit like this for at least 2 mins. You will hear the actuators recalibrating themselves. After 2 minutes turn the key to off position then start the car and it should be working out of the correct vents.

Where are the fuses on a Chevy Trailblazer?

The video above shows how to replace blown fuses in the interior fuse box of your 2004 Chevrolet Trailblazer in addition to the fuse panel diagram location. Electrical components such as your map light, radio, heated seats, high beams, power windows all have fuses and if they suddenly stop working, chances are you have a fuse that has blown out.

Are there fuses in the sunroof on a trailblazer?

If your Trailblazer has many options like a sunroof, navigation, heated seats, etc, the more fuses it has. Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component in question.

How can I tell if my fuel pump relay is faulty?

2. Engine does not start. Another symptom of a faulty fuel pump relay is an engine that does not start. If the fuel pump relay fails the fuel pump will be left without power. The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel.

How does a fuel pump relay control the fuel pump?

The fuel pump relay is usually controlled by the ignition or Powertrain Control Module, and when switched on, will provide current to the fuel pump so that it may function. As the fuel pump relay controls power to the fuel pump, any faults with it can cause issues with the fuel pump,…

What are the symptoms of a bad fuel pump?

The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel. This symptom can also be caused by a wide variety of other issues, so having the vehicle properly diagnosed is highly recommended. 3. No noise from the fuel pump

Who is the owner of the 2008 Chevrolet TrailBlazer?

2008 Chevrolet TrailBlazer Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the names TRAILBLAZER and EXT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. GM reserves the right to make changes after that time without further notice.

Why are the vents not working on my Chevy Trailblazer?

When I reconnected the battery the AC controller recalibrated itself and everything worked fine. Later I replaced the car’s (05 Trailblazer) battery and the top vents quit working. According to the schematics I had, this was due to the mode control door not working right.

Where can I find the owner’s manual for the Chevrolet TrailBlazer?

2021 chevrolet.com (U.S.) chevrolet.ca (Canada) Trailblazer Owner’s Manual 2021 Trailblazer Canada My Chevrolet App Download the my.Chevrolet App for full manuals and “how to” videos. The full owner’s manual is located with your vehicle infotainment system, if equipped.

Why are my GMC Envoy Trailblazer headlights not working?

2002-2009 GMC EVOY and Chevy TRAILBLAZERS have a common problem with the headlamp relay causing low beam headlight failure. This video is just a quick tip for anyone who may be experiencing this problem. Thank you for watching! please like and subscribe! Loading…

Why are the low beams on my truck not working?

My low beams suddenly stopped working. All the fuses are good. I swapped the relay and that was not the problem. The bulbs have less than 100 hours on them. I have read about similar problems.

Why are the DRLs not working on my GM Truck?

DRLs not working. Checked both fuse box. The one in the dash has nothing labeled for headlamps. Will have to check for flashers. Did not thing the headlamps came on with flashers. No not the flashers. If you pull the multiswitch lever all the way to you the highs and lows come on together.

What causes the ABS light to come on?

5 Common Reasons the ABS Light Comes On 1 Low Brake Fluid. 2 Faulty Speed Sensor. 3 Bad ABS Module. 4 Bulb Check. 5 Worn Hydraulic Pump. …

What are the symptoms of a bad alternator in a Chevy Trailblazer?

Here are the most common symptoms of a bad alternator in a Chevy Trailblazer: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage. In rare occasions the service engine soon light may light up.

What does the battery light mean on a Chevy Trailblazer?

The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage. In rare occasions the service engine soon light may light up.

How is the ABS light different from the brake light?

The ABS light differs from the BRAKE light as it is usually controlled by a computer module. When this light is on, there are often trouble codes stored to help the owner or a technician diagnose the source of the fault in the anti-lock braking system. The BRAKE light on most vehicles is activated by…

What should the volts be on a trailblazer?

With your Trailblazer turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts.

What kind of problem does a GMC Trailblazer have?

A common problem on the mid sized General Motors SUV’s of the last decade (2002-2009 Chevrolet Trailblazer, GMC Envoy, Buick Ranier, Oldsmobile Bravada & Saab 97x), is irregular electrical malfunctions. Especially headlights that flicker and often go out with no warning and then come back on with no warning.

How can I bypass the car theft alarm?

It is likely to turn off the light and start the car. Remember that this is the state where the vehicle is on but the engine is off. All the necessary components like the radio and dashboard lights will be powered up, which makes it possible to bypass the theft alarm. When you are outside the car.

What to do when your car alarm wont work?

After inserting the key into the driver’s door lock, turn the key to unlock, lock and then lock position again. Then, turn it again to the unlock position and the alarm is likely to be disabled now. Run the car for at least 10 minutes after cranking the engine to allow the car to reset the alarm. Keep the Car Thieves Away with these 5 Tips!

How long does the defroster stay on on a towing mirror?

The defroster will stay on for about 10 minutes, unless you press the button again to turn it off or turn off the ignition. If your truck has a towing mirror, the only part of the mirror that will be heated is the top portion of the glass, not the lower convex mirror. 1AAuto.com: What Is a Heated Mirror?

Are there heated mirrors on a Chevy truck?

by Dave Baker NYC. Some Chevrolet truck models come with optional heated side-view mirrors. These mirrors have a defroster circuit on the rear of the glass. You usually control the function by engaging a switch inside the vehicle.

Why does my drivers side window not work?

A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?

Why does my driver side door lock not work?

The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.

Which is Chevy replacement bulb guide do you need?

Chevrolet replacement bulb guide Model Year Low beam High beam Fog/ Driving light Astro 2005 – 1995 9006/HB4 9005/HB3 – W/sealed beam 2005 – 1995 H6054 – – Avalanche 2013 – 2010 H11 9005/HB3 5202 – 2009 – 2007 H11 9005/HB3 5202

What to do if your headlight fuse is not working?

First, locate the headlight fuse and make sure it is intact. If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks!

What to do when your low beam headlight blows out?

You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.

What kind of wiring does a Chevy Trailblazer use?

Diagram 2002 Chevy Trailblazer Radio Wiring Full Version Hd Quality Miiagram Villascorzi It 2004 Chevrolet Trailblazer Radio Wiring Diagrams Database Stage 02 Chevy Trailblazer Engine Wiring Harness Blog Diagrams Sight Ignition System Wiring Diagram 2002 2005 4 2l Chevrolet Trailblazer Gm Index Of Articles

How to wiring a 2003 Chevy Trailblazer headlight?

2003 Trailblazer Headlight Wiring Diagram Blog Flower Diagram Chevy Trailblazer Tail Light Wiring Full Version Hd Quality Diagramofchart I Ras It Diagram Wire For 3 02 Alternator Full Version Hd Quality Diagramclothing Roofgardenzaccardi It 2003 Chevrolet Trailblazer Engine Diagram Wiring Diagrams Iron Rain

What was the year of the Chevy Trailblazer?

Diagram 2003 Chevrolet Trailblazer Wiring Full Version Hd Quality Diagramofchart I Ras It Diagram 2003 Chevy Trailblazer Wiring Rear Full Version Hd Quality Diagramofchart I Ras It Diagram 2002 Chevy Trailblazer Radio Wiring Full Version Hd Quality Miiagram Villascorzi It 2004 Chevrolet Trailblazer Radio Wiring Diagrams Database Stage

Where is the theft deterrent module located in a passkey?

Passkey II – The Passkey II system has the Theft Deterrent Module (TDM) function stored in the Body Control Module (BCM). The TDM portion of the BCM will validate the resistive chip in the ignition key.

Why is the odometer on my GM Truck not working?

A common fault on ’99 – ’02 GM trucks was the permanent or intermittent failing of the odometer/gear select LCD. This meant that you were unable to see what gear you were currently in, unable to determine the mileage of the vehicle, and unable to use the trip computer.

What do you need to know about the Chevrolet TrailBlazer?

Evaporative Emission (EVAP) Canister Purge Solenoid, Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor, Valve Lifter Oil Manifold (VLOM) Assembly 5.3L, 6.0L: Throttle Actuator Control (TAC) Module – Powertrain Control Module (PCM) / Engine Control Module (ECM)

When did the Chevy Trailblazer SUV come out?

The Chevy Trailblazer is an SUV introduced in 1999 as an upgraded version of the Blazer. Sometimes minor problems may occur with the vehicle. When troubleshooting problems with any car, it is a good idea to check the fuses first before spending unnecessary time and energy on figuring out the issue.

Where are the fuses located on a Chevrolet TrailBlazer?

The fuse block is located under the hood in the engine compartment on the driver’s side of the vehicle. The rear underseat fuse block is located under the rear seat on the driver’s side of the vehicle. WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

Where is the fuse on my Chevy Cruze?

CHEVROLET CRUZE REAR WINDOW DEFROSTER FUSE LOCATION REPLACEMENT. WINDOW DEFOGGER NOT WORKING If playback doesn’t begin shortly, try restarting your device.

How many pins do you need for a trailer light?

In addition, they provide three additional pins for a 12V hot lead, electric brakes, and reverse lights. Trailer wiring can be one of the most intimidating components of your towing setup, but it doesn’t have to be. Most of us aren’t electricians, but that doesn’t mean wiring a trailer is beyond us.

What’s the best way to connect trailer lights?

Soldering: This is the best way to connect wires. Simpy solder your wires together for the strongest, most reliable connection using a soldering gun. Use heat shrink tubing to protect the soldered connection. Butt Connectors: If you aren’t comfortable soldering wires, heat shrink butt connectors and a heat gun are the next best thing.

Where is fuse for trailer running lights located?

Where is fuse for trailer running lights located. 0. Expert Reply: The fuse box location and the actual spot in the fuse box where the running light fuse is located will depend on the year, make and model of your vehicle. You can usually find the main fuse box under the hood.

When to change the fuse on a trailer?

All this being said, you’ll want to make sure the wiring on the trailer is in good shape before you start changing fuses. If there’s a short circuit in the trailer wiring, you’ll keep blowing fuses each time you turn the running lights on. Begin at the trailer connector and examine it for damage.

Why do I keep blowing fuses on my trailer?

Where are the fuses on a Chevy Silverado?

Under the hood there is a fuse that goes with stud # 2 for accessory power/trailer brakes, one labeled TRL PARK for trailer parking lamps, and one labeled TRL B/U for trailer reverse lights. Before replacing fuses and plugging the trailer back in be sure to find and eliminate the cause of the short or else it will just keep blowing fuses.

What are the colors of a 32 pin PCM connector?

C1 (Blue) PCM 32 Pin Connector Pin Wire Color Description 1 — Empty 2 — Empty 3 Brown w/ White stripe 1X CMP Signal 4 Pink Ignition Feed

How to fix no brake lights Chevy Trailblazer?

Chevy Trailblazer- No Brake Lights! It’s an easy fix.. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Where is the fuse block on a Honda Accord?

Pull the seat cushion forward to access the fuse block. The engine compartment fuse block is located in the engine compartment, on the passenger’s side of the vehicle.

Where are the fuse panels on a Chevy Trailblazer?