When to replace AC compressor in Ford Freestyle?
When to replace AC compressor in Ford Freestyle?
Restores low RPM AC performance for around-the-town driving. This fix has saved Ford Freestyle owners hundreds of dollars in needless, yet often recommended, AC compressor replacement. The subject vehicle is a 2006 Ford Freestyle.
Where is the AC control valve on a Ford Freestyle?
Pop the hood of a 2005-2007 Ford Freestyle, Ford 500, or Mercury Montego and you’re looking at a 3.0L V6 DOHC 24V DURATEC engine. This was the one and only engine option for these vehicles. The AC Compressor Control Valve is located behind a backing plate on the rear of the AC compressor.
Why is my Ford a / C compressor not working?
Without lubricant, the compressor could seize up and destroy itself. The A/C system will not allow the compressor to run when it is not pressurized, assuming that the lack of refrigerant could mean a lack of lubrication flow. So, it cuts the compressor off to prevent damage. The low-pressure situation is the most common.
How to remove the AC compressor control valve?
Removing the backing plate reveals the AC Compressor Control Valve and seal. Using dexterous fingertips or a dental pick, slowly remove the AC Compressor Control Valve and spring. Use the dental pick to extrude the green rubber seal from its groove without marring the machined surface. The used AC Compressor Control Valve and seal are waste.
What kind of refrigerant does a Ford Freestyle use?
Remove the black cap to reveal the port. 2005-2007 Ford Freestyle, Ford 500, and Mercury Montego with “Front AC” (most) use 29 ounces of R-134A refrigerant. For a Front AC application start with 24 ounces or (2) 12 oz. cans of refrigerant. R-134A refrigerant is available at any auto parts store in 12 oz. cans.
Restores low RPM AC performance for around-the-town driving. This fix has saved Ford Freestyle owners hundreds of dollars in needless, yet often recommended, AC compressor replacement. The subject vehicle is a 2006 Ford Freestyle.
Pop the hood of a 2005-2007 Ford Freestyle, Ford 500, or Mercury Montego and you’re looking at a 3.0L V6 DOHC 24V DURATEC engine. This was the one and only engine option for these vehicles. The AC Compressor Control Valve is located behind a backing plate on the rear of the AC compressor.
Remove the black cap to reveal the port. 2005-2007 Ford Freestyle, Ford 500, and Mercury Montego with “Front AC” (most) use 29 ounces of R-134A refrigerant. For a Front AC application start with 24 ounces or (2) 12 oz. cans of refrigerant. R-134A refrigerant is available at any auto parts store in 12 oz. cans.
How do you replace an AC compressor control valve?
Apply 2 drops of motor oil to the new seal and completely lubricate. Carefully press seal into groove without picking up any debris during the process. Apply 3 drops of motor oil to the AC Compressor Control Valve mating surface and completely lubricate. The AC Compressor Control Valve and spring assembly will install spring side first.
What kind of refrigerant does Ford Freestyle use?
The A/C in your Ford Freestyle uses an R134 refrigerant to cool the cabin when the A/C is on. The A/C compressor is responsible for delivering the refrigerant to the cabin through the air conditioning lines and the fan inside the cabin.
How does Ford Freestyle climate control work in cold weather?
“Modern day automotive A/C systems can be hazardous, oftentimes resulting in sudden and complete fogging over of the windshield during cold weather operation.” The FS keeps the fan off until the engine warms up, if the system is in AUTO mode. I have a ford freestyle limited 2006.
