When is the diagnostic trouble code p0316 set?

The Diagnostic Trouble Code (DTC) P0316 code is set when ECM detects a misfire during the first 1,000 revolution test interval following the engine start. Need more information on how to fix the P0316 FORD code?

What does P306 and p316 stand for?

Code P306 and P316 both indicate a misfire on cylinder number six. P300 is misfire on unknown cylinder. Car missed and started running very rough. I replaced the coil on plug (COP) and all is fixed. Complete instructions for a Ford Lincoln Mercury V8 found on Crown Victoria, Grand Marquis, Town Car, Mustang, Explorer 4.6L and 5.4L truck.

When to use the p0316 engine misfire code?

The PCM may disable the misfiring cylinder or cylinders in order to prevent further damage to the engine. Code P0316 is often listed in addition to one or more of the P0300 series codes that are associated with the misfiring cylinder/s. For instance, P0301 is triggered when cylinder #1 misfires repeatedly.

When is the p0316 code set on a 1997 Ford F150?

The P0316 code is set when ECMis detects a misfire during the first 1,000 revolution test interval following engine start. P0316 FORD More Information Need more information on how to fix the P0316 FORD code? Get Access to Factory Service Manuals P0316 FORD Information for specific Ford models P0316 1997 FORD F150 P0316 1998 FORD F150

What do codes p0308 and p0316 mean?

This P0316 code means the powertrain control module (PCM) has detected a misfire shortly after startup, specifically within the first 1,000 revolutions. This code may also be triggered with another of the other misfire codes which are P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0309, P0310, P0311, P0312.

What does code u1026, P0300 and p0302 mean?

Verified Hi,how are you?The p0300 means random misfire,the p0302 means cylinder #2 misfire,and the U1026 is a abs fault.There is a extended coverage plan in place for the mis-fire issues the issue deals with the intake valves. #07123A: Special Coverage Adjustment – Engine Intake Valve Seat – (Nov 13, 2008)

What is the problem code p0303?

This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model. A P0303 code means that the the car’s computer has detected that one of the engine’s cylinders is not firing properly.

What does trouble code p0303 mean?

P0303 is a generic diagnostic trouble code (DTC) indicating an issue with the firing of cylinder 3. This code may be seen with other misfire codes as well as lean / rich condition codes.

What causes p2195 and p0171 trouble codes?

P2195 and P0171 occur when the engine is running too rich (too much fuel relative to air charge) and the engine feedback system is unable to compensate. The “how can you fix this” depends on which component(s) in the system…

What causes a p0316 engine misfire on startup?

Rough engine start or idle Potential causes of this misfire code may include: Damaged or defective Crankshaft Position Sensor (CKP) CKP sensor wiring or connector fault Ignition system malfunction Fuel system malfunction: injector or fuel pump Mechanical engine problem

What does the lean condition code p0171 mean?

What Does P0171 Mean? Combustion engines run most efficiently when they maintain an air-fuel mixture ratio of 14.7 parts air to 1 part fuel. When there are more than 14.7 parts air to 1 part fuel in the air-fuel mixture, a lean condition exists and code P0171 is triggered.

When is the diagnostic trouble code p0316 set?