When do you replace the front axle on a Chevy Silverado?

In this video, we’re going to show you how to replace the right hand, or passenger side, front axle on this 2011 Chevy Silverado. This is a 1500. The procedure for the left axle is pretty much the same, and it’s also the same for these trucks for model years 2007-2013 for both this Chevy Silverado 1500, as well as the GMC Sierra.

How to replace a front axle shaft seal?

If you have ever owned a GM four wheel drive vehicle then there is a good chance you have had a front axle shaft seal leak. We replaced the RH output shaft seal on a Tahoe but it is the same for Silverado, Sierra,Suburban and Yukon. Part one shows details on the tear down and part two with guide you through the reassembly. Loading…

What do I need to replace front CV axles?

In this repair we use new axle or axles from 1AAuto.com, jack and jack stands, 15 to 22mm sockets with a ratchet extension. You’ll need a breaker bar and a pipe for some extra leverage, a 36mm socket, and I separate that one out because it’s not one that’s usually in your regular socket set.

Which is the right side of the axle to replace?

And it’s usually the right side that goes first because here in the lefthand-drive US of A, we turn sharper around righthand corners than lefthand ones. Sometimes the rubber boots covering the joints fail from age or are torn by road debris, letting the grease out and dirt and water in.

What kind of axle does a Chevy 3500 use?

The 31.5″ spring pad width axles are ’70’s Ford front axles (Dana 44 or Dana 60), the most desirable being the ’77-79 axles as they are high pinion with disc brakes. You will want to use an axle that came with leaf springs, the coil spring/radius arm axles don’t work.

Where can I get a Duramax straight axle swap?

We sell three “kits” for the front of the 2000-2010 DMAX/HD for those running the ’05+ Ford Superduty Axle (our prefered axle). We also sell all components individually so you can piece together your own kit. If you need assistance, putting your truck build together give us a call at 530-268-9494

Can a GM front axle be converted to 4WD?

If you’re using a GM or Dodge front axle, you’ll need to change the transfer case to one that sets the driveshaft on the passenger side. The transmission does need to be the 4WD version so 2WD transmissions will need to be converted.

Can a stock front suspension be replaced with a solid axle?

Our solid axle conversion kit allows you to remove the stock independent front suspension from your ’01-10 Chevy 2500/3500 and replace it with a solid axle. Includes greasable bushings/sleeves/bolts for both ends of the shackle as we use a bigger bolt.

Can you replace the CV joint on a Chevy Silverado?

In some vehicles, or possibly in an alternate universe or the past, you can replace just the CV joint because the half shaft would be just a big bar of metal and still be good, probably. But nowadays, it’s hard to even find someone who will sell you the joint by itself, so you might as well replace the whole CV axle assembly.

Which is the best CV axle for a Chevy Silverado?

0.0 out of 5 stars. Dependable, strong, versatile and well equipped, your Chevrolet Silverado is the perfect heavy-duty pick-up truck. A new Chevrolet Silverado CV axle from AutoZone ensures that you continue to perform the super-tough jobs that your Silverado is accustomed to.

How much does it cost to replace a shaft on a Chevy Silverado?

Chevrolet Silverado 1500 CV Axle / Shaft Assembly Replacement costs $439 on average. Following is a breakdown of the labor and parts estimates. What are CV Axles and how do they work? All front wheel drive and all wheel drive cars use CV axles. “CV” is short for constant velocity. You have your engine and transmission in the car.

How to replace rear shocks on a Chevy Silverado?

Use a box wrench and breaker bar with a 21mm socket to loosen the bottom nut and bolt securing the shock, and remove it. After removing the bottom nut and bolt, remove the upper shock absorber nut and bolt. At this point, you should be able to remove the shock. Set it next to your new shock to make sure you have the right replacement.

How do you replace the brake rotors on a Chevy Silverado?

Figure 1. Caliper removal. To remove the brake pad, simply pry them off the rotor with a flat head screwdriver. If you aren’t replacing the rotors, take care not to gouge them with the screwdriver. Figure 2. Brake pad removal. To remove the caliper mounting bracket, remove the two bolts circled in red in Figure 3.

What are the symptoms of a faulty CV axle?

There are several symptoms of a faulty CV axle. If your truck shakes while you accelerate and makes a popping noise while you drive, there’s something wrong with your Silverado drive axle. Inspect your CV boots for tears and cracks so you don’t have to wait for deteriorating performance.