Most popular

When do I hit the lock button on my Dodge Ram?

When do I hit the lock button on my Dodge Ram?

Especially when i come home at night and my neighbours have to hear locking my “baby” every time… occur when the RKE transmitter LOCK button is pressed. Lamps with Lock feature. To make your selection, press

How to disable the horn on a Dodge Ram?

Here are the steps that the owners manual have to disable the horn. 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel procedure). 3. Place the key into the ignition. 4. Turn the ignition to the ON position ( Do not start the engine ). 5. Press and hold the LOCK button on a programmed

How to turn off honking on Dodge Ram?

Press and hold the LOCK button on a programmed (i.e. functional) key fob. 6. Continue to hold the LOCK button, wait at least 4 hold the UNLOCK button. 7. When a single chime is heard, release both buttons.

Why does my Dodge Ram honk when I lock the truck?

I just bought my ram, it’s 2011 5.7 hemi… Car generally is okay, but honking when i lock the truck is so annoying… Especially when i come home at night and my neighbours have to hear locking my “baby” every time… occur when the RKE transmitter LOCK button is pressed.

How to turn off the Check Engine light on a Dodge Ram?

1 Insert the key into the ignition. 2 Turn the ignition key to the on position and then to the off position rapidly. Normally, an exact sequence of “on-off-on-off-on” must be performed within five seconds. This will cause the “check-engine” light to blink.

What happens when the ignition switch on a Dodge Ram goes bad?

Your Ram stalls because the faulty switch turns off the fuel pump or power to the ignition. When this happens, the engine will not be able to run until it gets that signal back. 2. Starts then Dies If your Dodge Ram is starting right up, but then immediately dies, that is a very good indication that the ignition switch is bad.

How can I check the odometer with the ignition key?

Turn the key on and off three times. On the third time leave the key to the run position then the code will pop up on the odometer. PinkCamoDodge likes this. I believe the code check using the ignition key only works on 99 and older rams. The newer ones have to be read with a reader. I’ve read both ways so here’s the key method.

What is the 23 code on a Dodge Ram?

The “23” refers to the numbered code in your vehicle’s service manual. PinkCamoDodge likes this. It works on the Gen3’s…had a CEL pop up on my ’05 a couple weeks ago and did the key trick, worked perfectly. PinkCamoDodge likes this. Key trick will work from 1998 and up. Except on some of the Jeep Liberty’s.

Why does my car not start when I turn the key?

Do you hear a click coming from under the hood when you turn the key. If so does it happen every time you turn the key over or occasionally. If that clicking occurs when you turn the key over and the car starts but when you don’t hear the click the car doesn’t start. . .

How to turn off double tap to Dodge ( M / kB )?

Notice how only the regular “Dodge” count is = 1 and every other dodge action is set to 10 (arbitrary number, you can set it to anything as long as you don’t press the key that many times in a row to trigger the dodge. This is exactly what the link I posted in the beginning to unbind double tap to dodge shows)

What to do when your Dodge Ram won’t start?

Try this trick to confirm it. When cold turn the ignition on BUT DON’T START. Just turn all the way on so the fuel pump will run. Turn it off and do this a second and third time. On the third time after 5 seconds go ahead and try to start. I’ll bet it fires right up. If it does then my hunch is correct and it’s an easy fix.

Do you hear a click coming from under the hood when you turn the key. If so does it happen every time you turn the key over or occasionally. If that clicking occurs when you turn the key over and the car starts but when you don’t hear the click the car doesn’t start. . .

What kind of key does a Dodge Truck need?

Bought a new key from Dodge dealership about 2 months ago. All the dash … read more Vocational, Technical or Tra… The truck will crank but not start.

What to do when Dodge engine light comes on?

Engine Light? Key Trick Code Reader for Dodge/Chrysler – How-To #2 If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Author Image
Ruth Doyle