When do I get a trouble code P2104?
When do I get a trouble code P2104?
Trouble code P2104 is triggered by the PCM when it receives an abnormal signal from various components. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected.
What causes a car to have a p2111 code?
Common Causes Of A P2111 Code. Possible causes of this code may include: Faulty throttle body. Dirty throttle plate or linkage. Faulty throttle position sensor. Defective accelerator pedal position sensor. Throttle actuator control motor is defective. Corroded or damaged connector.
What to do if your p2111 throttle is stuck?
If you have a P2111 and/or P2112 code with that vehicle, here is a PDF copy of the full TSB 10-21-6 bulletin . The fix involves replacing the throttle body with either part number 7T4Z-9E926-FA or 8S4Z-9E926-B.
How much does it cost to repair Ford P2104?
The cost to diagnose the P2104 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What does the p2107 OBD-II trouble code mean?
The P2107 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction with the operation of the Throttle Actuator Control System.
When does the PCM set the p2107 code?
Code P2107 is set by the PCM when the Throttle Actuator Control System Module Processor has a generic malfunction. The PCM controls the Throttle Actuator Control System by monitoring one or more throttle position sensors.
What does the P2104 throttle actuator control system do?
Replacing or cleaning ABS sensor Replacing or cleaning EGR Valve Replacing or cleaning Mass Airflow sensor Cleaning corrosion from connectors Repairing or replacing wiring Flashing or replacing PCM
Trouble code P2104 is triggered by the PCM when it receives an abnormal signal from various components. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected.
Replacing or cleaning ABS sensor Replacing or cleaning EGR Valve Replacing or cleaning Mass Airflow sensor Cleaning corrosion from connectors Repairing or replacing wiring Flashing or replacing PCM
What is the trouble code for the throttle actuator?
Trouble code P2104 is triggered by the PCM when it receives an abnormal signal from various components. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected. The severity of this code can be moderate to severe based on the specific malfunction.
The cost to diagnose the P2104 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What does the P2104 code on the engine mean?
What the P2104 code means. P2104 is an OBD-II generic code for the engine control module (ECM) detecting a major failure in the throttle actuator control (TAC) system causing the ECM to go into failure mode forced idle and limiting the engine to an idle RPM limit only. The throttle will not respond to any increase in throttle.
Trouble code P2104 is triggered by the PCM when it receives an abnormal signal from various components. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected. The severity of this code can be moderate to severe based on the specific malfunction.
