When did the bobcat 742 steer loader come out?
When did the bobcat 742 steer loader come out?
The Bobcat 742 is a gasoline powered small skid steer loader that was available from 1981 to 1990; a replacement 742B model was released by Bobcat in 1991. It came with a front bucket, although a number of other attachments fit the 742, including forks for use with shipping pallets, augers and brush cutters.
Can a bobcat be lifted off the ground?
Caution; before you make any repairs or adjustments to the drive centering device on a Bobcat, the first thing you must do is get the machine off the ground on 4 stands. Don’t trust just tilting the bucket forward and lifting front wheels, it could drift down. It must be on stands or sturdy blocks.
What causes centering bar to loosen on creeping Bobcat?
If you adjust too far, you will cause looseness of opposite centering bar on right side of centering plate, the side with holes that don’t adjust. Once you get no looseness of either drive lever, firmly lock down bolts for centering bars and re-check that nothing moved during torquing bolts.
How big is a standard Bobcat 741 bucket?
Rated to operate with a load of up to 1300 pounds, the Bobcat 741’s bucket did not reach a tipping load until it was filled with 2600 pounds of material. The standard bucket was 54 inches wide and had a 9.6 cubic ft capacity. When extended to its maximum height, it had 21.8 inches of reach.
The Bobcat 742 is a gasoline powered small skid steer loader that was available from 1981 to 1990; a replacement 742B model was released by Bobcat in 1991. It came with a front bucket, although a number of other attachments fit the 742, including forks for use with shipping pallets, augers and brush cutters.
Caution; before you make any repairs or adjustments to the drive centering device on a Bobcat, the first thing you must do is get the machine off the ground on 4 stands. Don’t trust just tilting the bucket forward and lifting front wheels, it could drift down. It must be on stands or sturdy blocks.
Rated to operate with a load of up to 1300 pounds, the Bobcat 741’s bucket did not reach a tipping load until it was filled with 2600 pounds of material. The standard bucket was 54 inches wide and had a 9.6 cubic ft capacity. When extended to its maximum height, it had 21.8 inches of reach.
If you adjust too far, you will cause looseness of opposite centering bar on right side of centering plate, the side with holes that don’t adjust. Once you get no looseness of either drive lever, firmly lock down bolts for centering bars and re-check that nothing moved during torquing bolts.
What do you need to know about Bobcat troubleshooting chart?
TROUBLESHOOTING Chart The following troubleshooting chart is provided for assistance in locating and correcting problems which are most common. Many of the recommended procedures must be done by authorized Bobcat Service Personnel only. PROBLEM No drive on one side, in one direction. No drive on one side in both directions.
Is the charge relief valve on the Bobcat loader damaged?
The charge relief valve is damaged. 741, 742, 743, 743DS Bobcat Loader Service Manual HYDROSTATIC SYSTEM INFORMATION IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out.
How big is a Bobcat skid steer loader?
Bobcat 742B Skid Steer Loader. Here is what we know about the Bobcat 742B Skid Steer Loader. It has a Gasoline Engine that produces 36 horsepower. This Bobcat 742B skid steer is a four cylinder and weighs 4850 pounds. This Bobcat is shown on the left with a general bucket attachment.
What’s the troubleshooting chart for a Bobcat loader?
741, 742, 743 & 743DS Bobcat Loader Service Manual TROUBLESHOOTING Chart The following troubleshooting chart is provided for assistance in locating and correcting problems which are most common. Many of the recommended procedures must be done by authorized Bobcat Service Personnel only.
What is the weight of a bobcat bucket?
It was 55.1 inches wide and 75.8 inches high, and its bucket’s hinge pin sat 109 inches off of the ground. Bobcat rated its operating weight to be 4730 pounds. An auxiliary hydraulic system was included as a standard feature on the 742.
What kind of engine did the bobcat 742 have?
The Bobcat 742 featured a liquid cooled gasoline engine made by Ford. It had four cylinders and a 1.6 liter displacement, and generated 34 horsepower, according to Bobcat’s specifications. Measuring 121.4 inches long, the Bobcat 742 rode on an extremely short 35.4 inch wheelbase.
What are the parts of a bobcat fuel system?
Maintain the efficiency of your Bobcat fuel system with parts designed for your fuel tank, filter, injector, pump, and carburetor. They’re designed specifically for Bobcat equipment to ensure they achieve the best possible performance and reliability. You have no items in your parts list.
Why do you choose genuine Bobcat parts and attachments?
Shop Why Choose Genuine Bobcat Parts and Attachments? You deserve quality parts found easily and delivered quickly. We know what parts you need, which is why we are your partner for your machine and your parts. Customer Testimonials: “Easy and fast shipping, got the item next day at my door.”
How much horsepower does a Bobcat skid steer have?
Bobcat® Skid Steer 742 Specifications Engine Cooling Liquid Engine Fuel Gasoline Horsepower 34 hp Rated Operating Capacity ( SAE ) 1,300 lbs Tipping Load 2600 lbs
