What kind of transmission does a Chevy C3500 have?
What kind of transmission does a Chevy C3500 have?
USED 01 C3500HD Auto Trans Diesel 6.5 type 4L80 w E BRAKE 129k! SHIPPED 28582 1999 – 00 Chevy 2500 3500 5.7 4×4 4L80E auto transmission WILL SHIP!
Is the 4L80 transmission compatible with the CJ5?
The 4L80 is doubtless a very successful OEM transmission, and a terrific conversion transmission in the right Jeeps and situations. However, with its 26-1/4″ length, it is a longer transmission and is not compatible with short-wheelbase Jeeps such as the CJ5 in any scenario, or CJ7’s if they have a lot of suspension lift.
Do you get money back on a 4L80E transmission?
Each 4L80E Is Fully Dyno-Tested. Money Back Gaurantee. If you are not completely satisfied with your transmission when it arrives, send it back for a full refund. Our 4L80E is the functional and visual equivalent of a new transmission. If for any reason it does not meet this description we want it back. No Core Deposit.
What kind of torque converter does GM 4L80 have?
The torque converter is a fluid turbine drive and like those on its predecessor transmissions; the TH350C, 700R4, and 4L60, the 4L80 features a lock-up pressure plate for direct mechanically coupled driving from the engine crank. The 4L80 features a 310 mm torque converter. As to length, this transmission is 26-1/4″ long.
USED 01 C3500HD Auto Trans Diesel 6.5 type 4L80 w E BRAKE 129k! SHIPPED 28582 1999 – 00 Chevy 2500 3500 5.7 4×4 4L80E auto transmission WILL SHIP!
The 4L80 is doubtless a very successful OEM transmission, and a terrific conversion transmission in the right Jeeps and situations. However, with its 26-1/4″ length, it is a longer transmission and is not compatible with short-wheelbase Jeeps such as the CJ5 in any scenario, or CJ7’s if they have a lot of suspension lift.
The torque converter is a fluid turbine drive and like those on its predecessor transmissions; the TH350C, 700R4, and 4L60, the 4L80 features a lock-up pressure plate for direct mechanically coupled driving from the engine crank. The 4L80 features a 310 mm torque converter. As to length, this transmission is 26-1/4″ long.
When did the C3500 Chevy truck come out?
Chevrolet merely introduced the C3500 as a bridge to fill the gap between light duty pickup trucks, and medium load trucks. It was primarily offered as a standard chassis cab that catered varying commercial purposes. In 1996, the truck had a major revamp when Chevrolet offered the C3500 in a redesigned crew chassis cab.
What are the parts of a Chevrolet C3500?
Control Arm, Tie Rod Adjusting Sleeve, Tie Rod End, Ball Joint,… Front Set of 2 Lower Control Arm Drive and Passenger Side For… I need a cable for the winch in my Chevrolet C3500, but I’m not sure which cable to get—steel or synthetic.
What do you need to know about the C3500?
Control Arm with Ball Joint Assembly, Front Upper Passenger… Control Arm with Ball Joint Assembly, Front Upper Driver Side… Control Arm, Tie Rod Adjusting Sleeve, Tie Rod End, Ball Joint,… Front Set of 2 Lower Control Arm Drive and Passenger Side For…
Can a GM crate 4L80E be used in a Duramax Van?
Many people have bought GM crate 4l85e’s for the 06-07 duramax van, and put them into 94+ with no issues other than hooking up the cooler lines (they can be swapped into the earlier 91-93 with some mods as well). I have an 06 3500 4L80E 2-wheel drive WT I need a transmission and can only afford one from a junk yard what all trucks will fit?
How big is the flexplate on a Chevy 4L80E?
The 4L80E, however, does use a much larger torque converter and mounting pattern, as we’ll see. This creates essentially two different LS flexplates. The most common design used with flush crankshaft flanges is concave exactly 0.400 inch.
What’s the difference between GM crate 4L60E and 4L80E?
It was the 4l60e that seen so many changes through the years and keeps you on your toes, not the 4l80e. Many people have bought GM crate 4l85e’s for the 06-07 duramax van, and put them into 94+ with no issues other than hooking up the cooler lines (they can be swapped into the earlier 91-93 with some mods as well).
Is the Chevy 4L80 compatible with GM engines?
While the 4L80 is generally mechanically compatible with Chevrolet style GM engines, it does require a transmission controller. That controller may be the factory-integrated with the PCM as on 1991-1999 TBI & Gen II engines, with the 1999-2007 Gen III engines, or the 2007+ Gen IV engines.
Is the 1996 Chevy Silverado 3500 Crew Cab Dually special?
This 1996 Chevrolet Silverado 3500 Crew Cab Dually is special; due to the fact that is a pristine ONE OWNER Florida truck with very low mileage. It has been extremely well kept and would make the future owner very happy!
What was the name of the 1988 Chevy Silverado?
At the same time, GMC C/K trucks used variations of the Sierra name (Sierra, Sierra Classic, Sierra Grande, and High Sierra). Today, Chevrolet still uses the CK and the CC in their current model codes. For the 1988 GMT400 model architecture, Chevrolet retained the C/K model nomenclature, with GMC branding its full-size line as Sierras.
Is the 454 Ho a big block engine?
Chevrolet Performance’s 454 HO crate engine is a Big-Block bargain – an affordable engine with performance specs that will make you think it’s 1970 all over again.
