What kind of alternator should I get for my Chevy Blazer?
What kind of alternator should I get for my Chevy Blazer?
Your alternator plays a crucial role in how well your Chevy Blazer performs on the road. When it’s time for your next replacement, choose a Chevrolet Blazer alternator from AutoZone and enjoy a maxed-out battery output with up to 14.8 volts of power.
Where did the 1998 Chevy Blazer come from?
No accident or damage reported to CARFAX. 1st owner purchased on 11/15/97 and owned in IL until 02/13/04 • 2nd owner purchased on 02/16/04 and owned in CA until 11/18/04 • 3rd owner purchased on 07/20/05 and owned in AZ until .
Why is my abs light on on my Chevy Blazer?
There have also been reports of an illuminated anti-lock braking system (ABS) light due to ABS control unit failure. While some did not experience any drivability issues because of this, others report one of the brakes locking up, causing the vehicle to pull over to one side.
Where can I find parts for a Chevy Blazer?
One great thing is that even if your Chevy Blazer is already a classic, looking for Classic Chevy Blazer parts is relatively easy nowadays. Before, it was the bane of all restorers to look for Chevy Blazer replacement and restoration parts. With the upsurge of online parts retailers, finding one is no longer a hassle.
Is the Chevy Trailblazer an SUV or SUV?
The Chevrolet Trailblazer combines power, space, comfort, and even fuel economy in an SUV-sized package. However, despite many owners loving their Chevy Trailblazer, its parts will wear and eventually need replacing.
Are there any aftermarket parts for the Chevrolet TrailBlazer?
Aftermarket parts are made with the same quality control standards as their OE counterparts. Because of this, aftermarket Chevrolet Trailblazer parts are no different in terms of quality or durability. That said, getting the parts you need will be cheaper if you choose aftermarket parts because they cost less than their OE counterparts.
Why is my fuel sensor on my trailblazer not working?
One of the parts that commonly fail in the Chevrolet Trailblazer is its fuel level sensor. The fuel sensor detects the fuel level in your tank, so one symptom of a broken fuel sensor is when the fuel gauge in your instrument cluster always shows that you’re running on empty even when you’re not.
Your alternator plays a crucial role in how well your Chevy Blazer performs on the road. When it’s time for your next replacement, choose a Chevrolet Blazer alternator from AutoZone and enjoy a maxed-out battery output with up to 14.8 volts of power.
Why does my car not start with a new battery and alternator?
With a new starter, battery, and alternator (assuming you have not drained the battery attempting to start it), the starter should attempt to crank over the engine. If the starter does not make any noise when the key it turned to crank over the engine, you have an issue with the fuses, or the circuit.
How do you get an alternator out of a bracket?
Use the 3/8 inch drive ratchet and a socket to turn these three bolts counterclockwise to loosen and remove the bolts. Slide the pry bar between the alternator and the bottom of the alternator bracket. Pry the alternator upward until the alternator comes out of the bracket.
What should I do if my alternator is not working?
The solution is to check your car’s manual for the particular fuse that controls the alternator and replace it. In some cars, you might also find another small fuse to the alternator’s control—usually a 15A to 20A fuse. An alternator does usually has 3 or 4 wires to it to function properly.
How big of an alternator do I need for a blazer?
Our Blazer performance alternators are built to give you a 100 percent charge out of your battery. Ideally, you need an output between 13.5 and 14.8 volts, and our components are built to effectively transform your mechanical energy into power to run your electrical components.
The solution is to check your car’s manual for the particular fuse that controls the alternator and replace it. In some cars, you might also find another small fuse to the alternator’s control—usually a 15A to 20A fuse. An alternator does usually has 3 or 4 wires to it to function properly.
With a new starter, battery, and alternator (assuming you have not drained the battery attempting to start it), the starter should attempt to crank over the engine. If the starter does not make any noise when the key it turned to crank over the engine, you have an issue with the fuses, or the circuit.
Why is there a noise coming from my alternator?
Noise from the alternator could be caused by a faulty rotor shaft, rectifiers, bearings, slip rings, stator winding or brushes. You will need to carefully inspect each of these components and replace them. One sure way of confirming that the noise is coming specifically from the alternator is to use a vacuum hose.
What are the mounting bolts on a Chevy Blazer?
•Mounting bolts. Torque the left bolt to 22 ft. lbs. (30 Nm) and the right bolt to 32 ft. lbs. (43 Nm). •Wires. Torque the battery feed wire nut to 71 inch lbs. (8 Nm). •Alternator brace. Torque the nuts and bolts to 22 ft. lbs. (30 Nm). •Accessory belt •Negative battery cable 4.3L Engine Install or connect the following:
Where is the negative battery on a Chevy Blazer?
Every time the crankshaft pulley turns, the alternator pulley also turns. Pull the 2000 Chevy Blazer into a safe working area and shut off the engine. Open the hood and locate the battery on the driver side front of the engine. Remove the negative battery cable from the battery with the adjustable wrench.
Use the 3/8 inch drive ratchet and a socket to turn these three bolts counterclockwise to loosen and remove the bolts. Slide the pry bar between the alternator and the bottom of the alternator bracket. Pry the alternator upward until the alternator comes out of the bracket.
Every time the crankshaft pulley turns, the alternator pulley also turns. Pull the 2000 Chevy Blazer into a safe working area and shut off the engine. Open the hood and locate the battery on the driver side front of the engine. Remove the negative battery cable from the battery with the adjustable wrench.
Where are the bolts on a Honda alternator?
There are two bolts on the front of the alternator and one bolt in the rear of the alternator. Use the 3/8 inch drive ratchet and a socket to turn these three bolts counterclockwise to loosen and remove the bolts.
