What is the problem code for a John Deere tractor?

JOHN DEERE Tractor ECU Fault Codes DTC Diagnostic Trouble Codes for the Engine Control Unit (ECU) Diagnostic Trouble Code – Display – Decision ECU 000097.03, ECU 000097.04 Engine system – Signal problem Water in fuel. Arrange repairs as quickly as possible through a John Deere dealer. ECU 000097.16

What is the Technical Manual for John Deere tractors?

John Deere Tractors 2204, 7630, 7730, 7830, 7930 Worldwide Edition Diagnosis and Tests Service Technical Manual (TM2234) tm2234 – 7630, 7730, 7830, 7930 and 2204Tractors Technical Manual.pdf

What to do if you have a John Deere fault?

ECU 000110.16 Check coolant level. Inspect and clean the radiator. If the code returns, arrange for repair as soon as possible through a John Deere dealer. ECU 000110.17 Low engine coolant temperature. To warm up the engine. If the problem persists, arrange for repair as soon as possible through a John Deere dealer.

What is the ECU code for a John Deere tractor?

Engine oil pressure low – Check engine oil level. If the code is returned, arrange for repairs immediately through a John Deere dealer. ECU 000100.03, ECU 000100.04 Engine system – There is a problem with the voltage of the engine oil pressure signal. Arrange repairs as quickly as possible through a John Deere dealer. ECU 000100.18

What is the trouble code on a John Deere?

Diagnostic trouble codes of the engine control unit (ECU) Diagnostic Trouble Code – Display – Decision ECU 000097.03 – Engine system – The problem with the signal Water in the fuel. Arrange repair as soon as possible through a John Deere dealer. ECU 000097.04 ECU 000097.16 – Engine water trap full – Remove water from water trap.

What is the PTR code for a John Deere tractor?

Group PTR: PTR Code Diagnostics PTR 000084.07 – Excessive Wheel Speed Detected During Calibration PTR 000158.01 – System Switched Voltage Low PTR 000162.02 – High/Low Switch Circuit Conflict PTR 000162.31 – High, Low Switch Stuck On PTR 000190.18 – Engine Speed Missing During Shift PTR 000191.00 – Excessive Top Shaft Speed During Calibration

How to diagnose a John Deere tractor?

Complete Diagnosis & Tests Technical Manual with electrical wiring diagrams for John Deere Tractors 5045E, 5055E, 5065E & 5075E (North Amereca), with all the shop information to maintain, test, repair, service like professional mechanics. * Numbered table of contents easy to use so that you can find the information you need fast.

What is a John Deere ECU fault code?

Engine oil pressure – The gauge shows oil pressure when the engine is off. At the first opportunity, have the dealer repaired by John Deere. ECU 000102.02 Engine system – There is a problem with the air pressure sensor in the manifold. At the first opportunity, have the dealer repaired by John Deere.

How to check John Deere high fuel temp?

Arrange repairs as quickly as possible through a John Deere dealer. ECU 000174.16 High fuel temperature – Check coolant level. Inspect and clean the radiator and fuel cooler. If the code returns, arrange for repairs as soon as possible through a John Deere dealer.

What to do if your john deere ECU goes bad?

Arrange repairs as quickly as possible through a John Deere dealer. ECU 000110.15 Engine coolant temperature high – Check coolant level. Inspect and clean the radiator. If the code is returned, arrange for repairs at your earliest convenience through a John Deere dealer.

What is the serial number on a John Deere tractor?

ECU 000237.02, ECU 000237.13, ECU 000237.31 Identification system – Invalid machine serial number. Arrange repairs as quickly as possible through a John Deere dealer. ECU 000611.03, ECU 000611.04 Engine system, There is a problem with the wiring of the electronically controlled injectors.

What is the ECU code on a John Deere?

ECU 000097.04 ECU 000097.16 – Engine water trap full – Remove water from water trap. ECU 000100.01 – Engine oil pressure low – Check engine oil level. If the code returns, arrange for repair immediately through a John Deere dealer. ECU 000100.03 – Engine system – The problem with the voltage signal of the oil pressure in the engine.

What does the diagnostic indicator light on a John Deere tractor mean?

This is what the manual says: “Engine Diagnostic Indicator Light (B) is used for Z925M EFI and Z930M EFI engines only. Light will be on if active engine diagnostic code is present. See your John Deere dealer.” Does anyone know what the light indicates or what diagnostic codes are possible?

How to clear codes on a John Deere skid steer?

Mike Gamby, service supervisor at Papé Machinery Construction & Forestry in Eugene, Oregon details the steps for how to clear the codes on a John Deere skid steer below. This walkthrough is specific to the John Deere 320E.

What does ECU 000097.03 mean on John Deere?

ECU 000097.03 – Engine system – The problem with the signal Water in the fuel. Arrange repair as soon as possible through a John Deere dealer. ECU 000097.04 ECU 000097.16 – Engine water trap full – Remove water from water trap. ECU 000100.01 – Engine oil pressure low – Check engine oil level.

What is the manual for a John Deere feller buncher?

John Deere JD743 Tree Harvester, JD743 Feller-Buncher Technical Manual (TM1159) John Deere 5440 & 5460 Self – Propelled Harvesters Technical Manual (TM1177)

What is the problem code for a John Deere tractor?