What is the p0032 code on a Jeep Wrangler?

I have an ’06 Jeep Wrangler w/4.0l, and at random intervals it throws the following 4 codes: P0032, P0038, P0052, and P0058. They’re “heater control circuit high” for all 4 O2 sensors.

What causes a p0058 heater control circuit high?

Potential causes of a P0058 code include: Open in the heater control circuit (12 volt PCM controlled systems) Short to B+ (battery voltage) in the heater control circuit (12 volt PCM controlled systems) Open ground circuit (12 volt PCM controlled systems) Short to ground on heater control circuit (On PCM ground controlled systems)

What is the generic powertrain code for a car?

This code is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model. Oxygen sensors with a heating element are common on today’s engines.

What does OBD II fault code p0038 mean?

What Does Code P0038 Mean? OBD II fault code P0038 is defined as “Oxygen Sensor Heater Control Circuit High (Bank 1 Sensor 2), and is set when the PCM (Powertrain Control Module) detects a signal voltage from oxygen sensor #2 that does not fall within the predefined range for that sensor.

I have an ’06 Jeep Wrangler w/4.0l, and at random intervals it throws the following 4 codes: P0032, P0038, P0052, and P0058. They’re “heater control circuit high” for all 4 O2 sensors.

What does the p0032 code on the O2 sensor mean?

The sensor is less effective when the exhaust gas temperature is low, so it includes a heater which is activated to help get better readings from the O2 sensor. Essentially this P0032 code means that the resistance of the heater circuit is higher than normal.

How to set p0038 on oxygen sensor heater?

Input voltages in all oxygen sensor heater control circuits should be equal to battery voltage; deviations of 10% will also set code P0038 and trigger the CHECK ENGINE light. Note that the electrical resistance may differ on some applications- consult the manual on the exact values for the application being worked on.

What are the symptoms of a p0038 DTC?

If the PCM detects an abnormally high voltage condition on the heater circuit, P0038 may set. This code is only referring to the heating circuitry half of the Oxygen sensor. Symptoms of a P0038 DTC may include: MIL (Malfunction indicator lamp) illumination There would likely be no other symptoms.

What causes a p0038 code on a heater?

Potential causes of a P0038 code include: Faulty Bank 1,2 HO2S (Heated Oxygen sensor) Open in the heater control circuit (12 volt PCM controlled systems) Short to B+ (battery voltage) in the heater control circuit (12 volt PCM controlled systems) Open ground circuit (12 volt PCM controlled systems)

What does p0038 mean on a PCM?

If the PCM detects an abnormally high voltage condition on the heater circuit, P0038 may set. This code is only referring to the heating circuitry half of the Oxygen sensor. Symptoms of a P0038 DTC may include: There would likely be no other symptoms. Potential causes of a P0038 code include:

How to find out if your Dodge has a p0038 code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P0038 DODGE code is 1.0 hour of labor.

What is fault code for Dodge Dakota p0032?

2005 PT Cruiser Conv 2.4 w/turbo. Check engine light comes on then car dies and will not restart without waiting a couple of hours or by disconnecting the battery. Fault codes are P0032 and P0838.I have replace the upstream O2 sensor with no luck. Don’t have the funds for unneeded parts replacement… 06 Dodge Dakota P0032 now P0133 & P0430???

What is the OBD code for a Dodge Ram 1500?

I bought a 2006 dodge ram 1500 with the 5.9 l hemi. I replaced one of the catalytic converters due to it being hollow and after I started the truck and the codes p0038 and p0058 and it stutters when racing up the engine…. I am getting the OBD codes p0032, p0038, p0052, and p0058.

What are the p0032 heater control circuit codes?

The codes I am getting are: P0032 HO2S Heater Control Circuit High (Bank 1 Sensor 1) P0038 HO2S Heater Control Circuit High (Bank 1 Sensor 2) I I have an ’06 Jeep Wrangler w/4.0l, and at random intervals it throws the following 4 codes: P0032, P0038, P0052, and P0058.

What does p0305 stand for on Dodge Ram?

P0305 is a fairly common trouble code with the Dodge Ram. It’s and OBD2 code and stands for: P0305 is certainly a cause for concern, and should be considered a threat to the drivability your Ram. The nice thing about P0305 is that it’s a cylinder specific trouble code,…

Why does my Dodge Ram p0750 not shift?

If the TCS commands the test but doesn’t see an inductive spike and the solenoid fails the test three consecutive times, it sets a P0750 and puts the transmission into “limp in” mode where it cannot shift past first or second gear. The TCS will repeat the test at start up and every 10 seconds after that.

What is the p0032 code on a Jeep Wrangler?