What is spiral cable clock spring?
What is spiral cable clock spring?
In vehicle steering systems a clock spring or clockspring is a spiral-wound special rotary electrical connector which allows a vehicle’s steering wheel to turn while still making an electrical connection between the steering wheel airbag and/or the vehicle’s horn and other devices and the vehicle’s electrical systems.
How to set a new clock spring youcanic?
1 Start the engine and let it idle. 2 Turn the steering wheel all the way to the right. 3 Turn the steering wheel all the way to the left. 4 Repeat this procedure twice with the engine running. 5 Drive for at least 50 feet, and the steering angle sensor will reset.
How to reset the clock spring on a car?
How to reset a clock spring? 1 Start the engine and let it idle. 2 Turn the steering wheel all the way to the right. 3 Turn the steering wheel all the way to the left. 4 Repeat this procedure twice with the engine running. 5 Drive for at least 50 feet, and the steering angle sensor will reset.
What to do if your clock spring is broken?
Remove the clock spring while the steering wheel is in a neutral position and be sure not to turn the clock spring after you remove it. Reinstall the clock spring in the same neutral position.
Where does the clock spring get its name?
This device is sometimes referred to as a spiral cable, airbag clock spring, steering wheel clock spring, clock spring assembly, cable reel, or contact reel, depending on the vehicle and where you live. The clock spring is not really a spring at all, but it gets its name from the look of the coiled ribbon inside the housing.
When to replace the clock spring in a car?
Since the clock spring is responsible for two safety devices including the horn and airbag safety system it is highly advised to replace the clock spring with a new unit as soon as possible.
How can I tell if my clockspring is failing?
You can detect a failed airbag clockspring by checking the AIRBAG warning light on your minivan’s instrument panel. The AIRBAG warning light normally illuminates for a few seconds after you start your minivan, and then goes out if the airbag system is functioning properly.
What happens if you lose The clockspring on a minivan?
The clockspring assembly that connects steering wheel mounted electrical components to the electrical system on your minivan(VIN: xxxxxxxxxxxxxxxxx) may lose the electrical connection to those components. This could cause the driver’s airbag, horn, speed control system and/or steering wheel mounted radio controls (if equipped)to be inoperative.
Can a clock spring be replaced on an Acura TSX?
In this video, the clock spring is replaced on a 2005 Acura TSX, but is however the same procedure as a Honda Civic, Accord, Passport, Pilot, Element, CR-V, Odyssey and Acura EL, TSX, TL, TLX, RDX, NSX and MDX. The airbag must be removed, wires disconnected and then the steering wheel must be removed.
