What happens if you enter an invalid anti theft code?

NOTE: If three consecutive attempts are made to enter an invalid anti-theft code the radio will enter a ‘WAIT’ state. While in this state the radio display will read ‘WAIT’. To exit the ‘WAIT’ state the radio must remain powered with the ignition in the run position for a continuous 30 minutes (the vehicle may be driven during this time).

How do I clear the anti theft code?

As Cool_V_300C noted, as long as your original radio is the one installed, the Anti-Theft code will clear itself in time. Turn the car off, making sure that you give it enough time to really turn off by opening a door and waiting for the blue light around the USB port in the center console to turn off, then turn it back on.

How to get anti theft code after battery disconnect?

For the vehicles that are equiped with power net or NTG4 radios. If the Telematics Gateway Module (TGW) or the radio have been removed or replaced. A four digit security code is required in order for the radio to function: The key must be in the “RUN” position. Press the “ON/VOL” control button.

Do you need an anti theft code on your car?

It should recover itself once you start the car. Starting in the 2012 model year, RHR, RHB, RES, RHA, REB, RE2, RB5, RB6, RE6 radios in the US all require a Radio Anti-Theft Code to operate. There have been a few cases on 2011 vehicles, JC, LD, LX models.

What is the VIN lock code for a Dodge?

Dodge Mechanic: -Brad-, Dodge Dealership Tech replied 6 years ago HI,The code is:Anti-Theft Code Results – 5519Anti-Theft Code Serial Number Part NumberT00AM2392T1474 P05091336ACGlad I could help,Brad -Brad-, Dodge Dealership Tech

How do you enter an anti theft code?

Enter the 4-digit code by pressing the corresponding preset buttons in sequence. NOTE: If three consecutive attempts are made to enter an invalid anti-theft code the radio will enter a ‘WAIT’ state. While in this state the radio display will read ‘WAIT’.

What is the anti theft number on a Jeep Wrangler?

1. Call 1-800-448-0944 2. Request anti-theft code. 3. State dealer code. 4. State radio serial number. 5. State VIN 6. The 4-digit anti-theft code will be provided. Eastern Time Monday through Friday. 1. Ignition in the run position.

How does the security code work on a Jeep Wrangler?

The security code is a 4 digit number generated by the radio company. Once the radio is installed into the original vehicle, that number is assigned to the VIN #. Each time that the ignition is powered up, the PCM sends the VIN to the cluster which then sends it to the radio.

What to do if your anti theft system is not working?

If your car’s anti-theft system isn’t working correctly, you’ll need to find a way to shut the system off so your car will return to normal operation. Step 1: Check your key fob battery. A car’s anti-theft system may activate if your key fob battery is dead and hasn’t disabled the system.

How can you tell if your car has an anti theft system?

Step 2: Check your door lock cylinder. If your car has been damaged in an attempt to steal it or break into it, the anti-theft system may have been engaged. Check for damage to the lock cylinder itself or under the door handle where would-be thieves may have punched through with a screwdriver.

When do I need an anti theft code for my Radio?

All radios now require an anti-theft code no matter what year vehicle they are installed in. The anti-theft code is only needed when a radio is swapped from one vehicle to another. The radio keeps track of the VIN over the bus and when the VIN changes it will ask for the code.

How to disable the anti theft device in your car?

Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder. Tip: Try turning the key both ways fully to disable the anti-theft system.

Do you need a code for a Dodge radio?

Many Dodge – Chrysler vehicles are equipped with radios that require a special anti-theft radio code. This code is not required, unless the radio is removed from the vehicle, or the vehicles battery is disconnected.

Where can I find the anti theft code?

Dodge Mechanic: -Brad-, Dodge Dealership Tech replied 5 years ago HI, The code is: Anti-Theft Code Results – 5519 Anti-Theft Code Serial Number Part Number T00AM2392T1474 P05091336AC Glad I could help, Brad -Brad-, Dodge Dealership Tech Category: Dodge Satisfied Customers:8,407 Experience: 16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)

Do you need an anti theft VIN code?

This one is a plug-and-play installation with same harness and same amp/speakers as the original car, and it has NAV. I do not need installation instructions – I just the anti-theft code.

What happens if you enter an invalid anti theft code?