What does the warning light on the Check Engine mean?
What does the warning light on the Check Engine mean?
RAS will be turned off – and thus the warning light on – if either of the Check Engine, ABS, Traction or Stability Control light are on, so address them first with your dealer. Your vehicle will steer just fine using the two front wheels, but without the advanced RAS enhancement.
How to fix the gear indicator on a Dodge Ram?
Figure 3. Adjust the gear selector tab. Once the gear selector is adjusted, apply the parking brake, and toggle the shifter through the multiple gears to make sure it has been adjusted properly. If it is working, replace the lower dash panel and its three screws. Then enjoy a properly working gear selector.
What’s the status of the dash gauge on a Dodge Ram?
Here is how you can fix it. This article applies to the Dodge Ram 1500 2nd Generation (1994-2001). The gauges cluster in your dashboard are designed to relay the necessary and vital information for you to be aware of the current situation regarding your truck.
How to change the turn signal on a Dodge Ram?
Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed.
RAS will be turned off – and thus the warning light on – if either of the Check Engine, ABS, Traction or Stability Control light are on, so address them first with your dealer. Your vehicle will steer just fine using the two front wheels, but without the advanced RAS enhancement.
What does it mean when your abs light comes on?
Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.
What does the etc light on the dashboard mean?
That’s why the ETC light in your dashboard illuminates when problems occur. This light indicates that there is a problem with the ETC and you should have it checked as soon as possible. The ETC light is normally the last warning you will receive before your engine performance is affected.
What does a security alert light mean on a car?
Security Alert Indicator light will turn on momentarily if the ignition switch is locked and will need the proper transponder-equipped key to restart. If the light is visible when the vehicle is on, then it typically indicates a malfunction in the security system.
Why does the check gauge light come on?
Gauges that usually make up the panel watch the amount of oil, gas and battery power, in addition to the engine. When you notice the Check Gauge light is on don’t panic.
Why does the etc warning light come on?
Back to the 09 GC: we replaced the temp sensor sending unit 10 weeks ago. There has been no recurrence of this problem. We still do not understand why the ETC warning light would come on, but it stopped along with the Check Gauges warning, the temp gauge pegging left, and the check engine light coming on.
Where is the check gauge on a car?
The Check Gauge light is located on the dashboard. This area is also known as the instrument panel. How the dashboard looks and what gauges are included will vary by the type and brand of vehicle you are driving. Gauges that usually make up the panel watch the amount of oil, gas and battery power, in addition to the engine.
What do the gauges on the dashboard mean?
This area is also known as the instrument panel. How the dashboard looks and what gauges are included will vary by the type and brand of vehicle you are driving. Gauges that usually make up the panel watch the amount of oil, gas and battery power, in addition to the engine.
