What does the maintenance required light mean on a 2007 Toyota Tacoma?
What does the maintenance required light mean on a 2007 Toyota Tacoma?
Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.
What does the maintenance required light mean on a 2015 Toyota Tacoma?
The maint reqd light means that Toyota recommends servicing your Tacoma soon. Depending on what the vehicle mileage is when the light came on, it could mean that any of the following maintenance is needed: Engine oil change. Fluid check. Tire Rotation.
How to reset the maint reqd light indicator Toyota Tacoma?
To reset maintenance required light Toyota Tacoma and that can be made manually by use button on car dashboard. To turning off maint reqd light indicator Toyota Tacoma on 2005 – 2017, conform to the following instructions: Turn the ignition switch to the “On” position, but do not start the engine
When do you reset the odometer on a Toyota Tacoma?
Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off. This reset should be done after changed the engine oil and filter according to the technical specifications relating Toyota Tacoma Engine.
How do you reset a Toyota Tacoma engine?
Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “000000” Is Displayed. Then Turn The Ignition OFF. Turn The Ignition ON. Don’t Start The Engine.
How to reset the maintenance required warning light?
Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “MAINT REQD” flashes multiple times and the light goes off. Turn The Ignition OFF. Maintenance Reset Is Complete. The Toyota Tacoma is a pickup truck manufactured in the U.S. by the Japanese automobile manufacturer Toyota since 1995.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
How do I reset the maintance light?
Here’s how you do a maintenance light reset: Put your key in the ignition. Turn the key to position one. This is the position just before starting the car. Push the trip meter reset button on the dashboard. Hold it down for a second or two. Continue to hold the odometer button for around ten seconds. The light should flash, beep, and then go out. Once off, release the odometer button. Start your car.
What does the maintenance required light mean?
The maintenance required light just means that some sort of scheduled maintenance needs to be done. Most of the time it just means you need an oil/filter change. Your owner’s manual will list what maintenance is required based on your milage.
