What does p0137 mean on an oxygen sensor?

For example, a P0137 on a Toyota translates to “Oxygen Sensor Circuit Low Voltage Bank 1, Sensor 2”; a P0137 on a Chevy, meanwhile, is “Heated Oxygen Sensor (HO2S) Circuit Low Voltage Bank 1, Sensor 2”. Since translations vary, the possible causes may also differ depending on the make and model of your vehicle.

What does p0201 mean on a PCM?

P0201 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, the PCM expects to see the voltage pulled “low” or close to zero. When the injector is switched off, the PCM expects to see a voltage that is close to battery voltage or “high”.

What are the symptoms of an O2 sensor circuit low voltage?

Here are the most common causes of an O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2) problem or code P0137: What are the Common Symptoms of the P0137 Code?

What is the code for the O2 sensor?

You may need to look at the code P0122 since it pertains to the throttle position sensor and this can affect all the drive symptoms you are having. The O2 sensor readings seem to be normal and you are not getting any O2 sensor codes.

Here are the most common causes of an O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2) problem or code P0137: What are the Common Symptoms of the P0137 Code?

What does p0201 mean on an OBD-II vehicle?

What does that mean? This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model. P0201 means that the PCM detected a fault in the injector or the wiring to the injector.

When does p0137 trigger in a catalytic converter?

In contrast, downstream sensors (sensor 2) generate a fairly steady voltage when the catalytic converter is working properly. Code P0137 triggers when the PCM detects that the signal from sensor 2 on Bank 1 was below a specific value for a certain amount of time.

When is the p0137 sensor circuit low voltage bank 1 detected?

Replacing the rear O2 Sensor bank 1 usually takes care of the problem. What does this mean? When is the code detected? The P0137 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor signal voltage remains excessively low for an extended period of time.

What is the diagnostic code for O2 sensor circuit low voltage?

Cost of diagnosing the P0137 code. P0137 is a diagnostic trouble code (DTC) for “O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What is the O2 sensor code for bank 1?

All our repairs are backed by our 12-month / 12,000-mile warranty. P0137 is the OBD-II generic code indicating the O2 sensor for bank 1 sensor 2 is failing to increase the voltage output above .21 volts indicating excessive oxygen in the exhaust.

What does it mean when Honda Odyssey says p0137?

P0137is a fairly common OBDII code that occurs in the Honda Odyssey, it’s a general code. This means that it has the same meaning for any vehicle. This code is supposed to let you know that there is an issue with the wiring or harness going to the sensor, or the sensor itself is bad. There are other things that cause P0137 to populate.

What does p0137 mean on an oxygen sensor?