What does p0017 stand for in Chevy Colorado?

P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 . P0017 Symptoms: Chevy Colorado. P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine.

Where can I find the p0017 trouble code?

Enter your ride HERE to be a part of this months Ride of the Month Challenge! Ok i just did a scan on my truck and came up with the P0017 trouble code, and i got this description when i looked it up.

How much does it cost to repair a p0017 Chevy?

The cost of diagnosing the P0017 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

How is DTC p0017 used in Powertrain Control Module?

The powertrain control module (PCM) uses the crankshaft position (CKP) sensor and the exhaust camshaft position (CMP) sensor information to monitor the correlation between the crankshaft and camshaft positions. If the PCM detects a CMP sensor pulse occurs during the incorrect CKP, DTC P0017 will set.

What causes the DTC p0017 trouble code to set?

If the PCM detects a CMP sensor pulse occurs during the incorrect CKP, DTC P0017 will set. occasionally the engine light comes on but after a while of driving the light goes away.

Do you have that code in conjunction with p0017?

Legen..wait4it..Dary! Do you have that code in conjunction with P0008, P0009, P0016, P0018, and P0019? Is the engine running differently? What parts have already been replaced? Do you hear any rattles that weren’t there before? How many miles on the truck? Legen..wait4it..Dary! You’ve probably already read this, but just in case.

What does the PCM code p0017 mean?

Despite the varying names given by respective manufacturers, P0017 code simply means that the PCM believes the difference between the crankshaft position and the camshaft position exceeds specification. There are other codes GM uses with a similar meaning.

How is the crank position of a Chevy Colorado determined?

Even the slightest misalignment can cause P0017. The Crankshaft Sensor is going to use a tone or reluctor ring to determine the position of the Crank. This ring uses notches that are scanned by the Crank Sensor in order to get an accurate position.

What does the PCM code p0017 stand for?

The CKP and CMP sensors work together to keep the PCM informed about engine timing. Should the timing be off, the PCM will set a code P0017. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor B). The B sensor is likely on the exhaust side.

What causes a crankshaft to be in p0017 position?

To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty

How can I tell if my car has a P0300 code?

Use FIXD to scan your vehicle to verify P0300 is the only code present. If other codes are present, they must be addressed first. Check for loose connectors at the ignition coils or for damaged wiring. Look for loose engine ground wires as well.

What are the possible causes of a p0014 Chevy?

P0014 CHEVROLET Possible Causes. Dirty Oil. Low engine oil level. Faulty Exhaust Camshaft Position Actuator Solenoid. Exhaust Camshaft Position Actuator Solenoid harness is open or shorted. Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection.

What is the trouble code for Chevy Colorado?

P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Chevy Colorado. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor.

What does the p0014 do on a VVT?

VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown. P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order.

How often does the p0017 code come up?

My P0017 code pops up about every 3-4 weeks and stays on until it has been restarted about 5-6 times, (with at least 1/2 hour between shutdown and startup). I too have replaced the obvious part (OEM and Aftermarket) and it seems to have calmed down some.

Why does my Buick Enclave p0017 not run?

P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine. When this timing is off, the engine will typically not run (or barely run).

What does p0017 stand for in Chevy Colorado?