What does it mean to re-install timing chain?
What does it mean to re-install timing chain?
Which means to align the crank timing marks and the cam timing marks to spec, then re-install the timing chain. Before moving the cam or crank, find a copy of the manufacturer’s procedure on how to do this without banging the valves into the piston or the valves into the valves. The method varies engine to engine.
How does advancing or retarding a camshaft work?
Advancing or retarding the cam pushes the centerline of the camshaft to one side or the other of the crankshaft centerline. This changes the Timing of the valve opening and closing events, in relation to the position of the piston in the cylinder. How is it measured? Find the lobe centerline in relation to the piston’s position in the cylinder.
Can you rotate the cam shaft on an OHC engine?
Rotating the camshaft on an OHC engine is easy to do when your pulling the head. And even just changing the chain. If the crankshaft is turned to put the timing mark 90* before top dead center, all 4 pistons will be half way down their bores and you can spin the camshaft with no chance of a piston/valve collision.
What happens when a cam is installed straight up?
When a cam is installed “straight-up,” the imaginary centerlines of the two shafts line up exactly. Advancing or retarding the cam pushes the centerline of the camshaft to one side or the other of the crankshaft centerline. This changes the Timing of the valve opening and closing events, in relation to the position of the piston in the cylinder.
What do you need to know about timing covers?
Different engine combinations utilize either a belt or chain that is connected to the cam and crankshaft and is responsible for the internal operation of a combustion engine. They are both protected from exposure by a timing cover which can be opened and accessed by a mechanic to repair damage to these components or make adjustments as needed.
Which means to align the crank timing marks and the cam timing marks to spec, then re-install the timing chain. Before moving the cam or crank, find a copy of the manufacturer’s procedure on how to do this without banging the valves into the piston or the valves into the valves. The method varies engine to engine.
Can a bad timing cover cause an engine to run rough?
Another common signal that a problem with the timing cover exists is if the motor runs rough. When a timing cover becomes damaged and does not properly seal with the engine block, dirt and debris can enter the engine; especially in critical areas like the crankshaft or camshaft. When this happens, the engine may run rough.
Advancing or retarding the cam pushes the centerline of the camshaft to one side or the other of the crankshaft centerline. This changes the Timing of the valve opening and closing events, in relation to the position of the piston in the cylinder. How is it measured? Find the lobe centerline in relation to the piston’s position in the cylinder.
