Most popular

What does code 52 mean on Ford airbag?

What does code 52 mean on Ford airbag?

The code should then clear. Code 52 just means that the battery voltage to the airbag curcit has been interupted. if it flashs code 12 this is a hard fault and you will probably find the fuse blown.

What is the Flash code on a Ford air bag?

Lamp flash code: 13 1.3 DTC B1317: Battery voltage high. Lamp flash code: continuous 1.4 DTC B1318: Battery voltage low. Lamp flash code: continuous 1.5 DTC B1342: Air bag control module is defective. Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground.

What does the code on the air bag indicator mean?

If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.

What is the DTC Flash code for an air bag?

Lamp flash code: 34 1.24 DTC B2292 Error value 24: Passenger safety belt pretensioner short to ground. Lamp flash code: 34 1.25 DTC B2293 Error value 31: Driver air bag first stage short to ground. Lamp flash code: 19 1.26 DTC B2293 Error value 30: Driver air bag first stage short to battery. Lamp flash code: 19

The code should then clear. Code 52 just means that the battery voltage to the airbag curcit has been interupted. if it flashs code 12 this is a hard fault and you will probably find the fuse blown.

Lamp flash code: 13 1.3 DTC B1317: Battery voltage high. Lamp flash code: continuous 1.4 DTC B1318: Battery voltage low. Lamp flash code: continuous 1.5 DTC B1342: Air bag control module is defective. Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground.

What does the code 21 mean on a Ford airbag?

Codes 21 to 24 These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit. Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.

How does the airbag light code work on a Ford?

These codes are signaled by five flashes, a two-second pause and the number of flashes that corresponds to the second digit.

Is the SRS warning light an air bag code?

These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags. How to read air bag codes ?

What does Code 51 mean on Ford airbag?

Code 51 (five flashes, pause, one flash) means the airbag diagnostic monitor’s internal fuse is blown, Code 52 (five flashes, pause, two flashes) means the back-up power supply has had a voltage boost fault and Code 53 (five flashes, pause, three flashes) means the front crash sensor has high resistance or the diagnostic monitor has failed.

What does code 52 on airbag light mean?

Code 52 just means that the battery voltage to the airbag curcit has been interupted. If it flashs code 12 this is a hard fault and you will probably find the fuse blown. Click to expand… Go to the Data Link Connector next to the fuse panel….

How does the airbag warning light work on a Ford?

by Alexander Poirier. When there is a problem with a Ford’s airbag, the airbag warning light will illuminate and flash a code that identifies the problem. Because airbag problems range from a lost battery feed to a shorted circuit, it is important to understand the codes so that the airbag can be properly repaired.

What does code 22 mean on Ford airbag?

Code 22 (double flash, pause, two flashes) means the safing center output circuit has shorted to battery voltage, Code 23 (double flash, pause, three flashes) means the memory clear circuit is improperly grounded and Code 24 (double flash, pause, four flashes) means there is a system disarm failure or internal diagnostic monitor fault.

What does the code 12 on the airbag light mean?

These codes are started by a single flash of the indicator light, followed by a two-second pause. After the pause, the light will flash the number of times that corresponds to the second digit of the code. Code 12 (single flash, pause, two flashes) means that there is a lost battery feed.

Codes 21 to 24 These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit. Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

What is the code for the airbag light?

Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

Where is the code on the airbag light?

On the data link connector there is a airbag code clear pin. after the ignition is turned on and the airbag light has flashed the code you gound the pin and the cluster will beep 5 times. The code should then clear.

What are the air bag codes for a 1995 Mustang?

Mustang 1995 Air Bag Diagnostic Codes Mustang 1995 Air Bag Diagnostic Codes and Debug Information. Use the information at your own risk. There is no claim to accuracy. Tech Home 90-91 Air Bag Info 92 Air Bag Info

What is the diagnostic code for an air bag?

AIR BAG DIAGNOSTIC MONITOR (14B056). AIR BAG MODULES. AIR BAG MODULES WITH DISCOLORED OR DAMAGED COVER DEPLOYMENT DOORS MUST BE REPLACED, NOT REPAINTED. NOTE: If ever a part is replaced and the new part did not correct the condition, reinstall the original part and perform the diagnostic procedure again.

Why is my Ford airbag light flashing code?

If your Airbag light on or airbag light flashing. When you retrieve the ford airbag codes than you can know why is your airbag light on. Step 2 start counting how many times the airbag light blinks the first digit blinks fast and than stops the second digit blinks slow see video.

On the data link connector there is a airbag code clear pin. after the ignition is turned on and the airbag light has flashed the code you gound the pin and the cluster will beep 5 times. The code should then clear.

What is the DTC Flash code for a Ford airbag?

1.13 DTC B2290 Error value 27: Occupant Classification System module fault. Lamp flash code: 16 1.14 DTC B2290 Error value 26: Occupant Classification System communications fault. Lamp flash code: 16 1.15 DTC B2290 Error value 25: Occupant Classification System calibration fault. Lamp flash code: 16

What’s the light on the airbag on my Taurus?

I purchased a 1993 Taurus with the airbag supposedly already disabled and the airbag orange dash light has always blinked with a pattern (3 pause, 2 pause, long pause, repeat or something like that) so when I did some major service work that required removing the dash, I pulled out the lightbulb for the airbag dash indicator.

What does code 12 mean on an airbag?

Code 12 (single flash, pause, two flashes) means that there is a lost battery feed. Code 13 (single flash, pause, three flashes) means that the airbag circuit has shorted to ground and Code 14 (single flash, pause, four flashes) means that the primary crash sensor circuit has shorted to ground.

I purchased a 1993 Taurus with the airbag supposedly already disabled and the airbag orange dash light has always blinked with a pattern (3 pause, 2 pause, long pause, repeat or something like that) so when I did some major service work that required removing the dash, I pulled out the lightbulb for the airbag dash indicator.

Author Image
Ruth Doyle