What does a remote starter switch do?
What does a remote starter switch do?
The remote starter switch allows you to “turn over” or “crank” the engine without actually running the engine. This comes in handy for conducting certain tests, such as compression or finding the high side of an engine cylinder.
How do you turn on a remote starter?
Place one alligator clamp on the positive side of the battery. This will provide the power to the switch. Place the other alligator clamp of the switch on the small connector of the starter relay. The contacts of the starter relay will then be “turning over” or “cranking” the starter. Depress the remote starter switch.
What does a toolpro remote starter switch do?
Check out this ToolPRO Remote Starter Switch, a handy little device for mechanics working alone. The purpose of this simple 2 wired device – is to turn the engine over without starting it up. This is useful for finding top dead centre in your engine; without having to go back and forth from the drivers seat.
Why do I need an in line starter switch?
This comes in handy for conducting certain tests, such as compression or finding the high side of an engine cylinder. By following a basic process you can place the in-line switch temporarily on your vehicle, saving you the need to get a helper for a diagnosing situation.
Where is the starter switch on a car?
This is generally located on the sidewall of the engine compartment just above the battery. Identify the leads of the starter relay. There will be two large connections, one that comes from the battery and another that goes directly to the engine starter motor itself. There will also be either one or two small connections on the starter relay.
How do I connect a remote starter?
Step 1: Plug the ground cable into the starter kit. The ground cable should be the first cable that you plug into the remote starter box, before any power connections. Step 2: Plug power wires into the starter kit. Connect the rest of your cables to the remote starter.
How do you use a remote starter switch?
Remote Starter Switch. To use your remote starter switch, connect the wires to your car, and press the switch to turn your engine. Our remote starters work for all major cars, trucks, and SUVs, so no matter what you drive, you can save time on compression tests and on valve, distributor, and camshaft adjustments with a remote starter from AutoZone.
How do you use a remote starter?
To remote start your vehicle, first press the lock button to lock all the doors. Then press the remote start button twice. The exterior lamps will flash twice. The horn will sound if the system fails to start, unless quiet start is on. Quiet start will also run the blower fan at a slower speed to reduce noise.
How does a remote vehicle start system work?
Remote car starters work via radio frequency . A box is connected to your car’s ignition switch and other basic startup mechanisms. When you press the ignition button on your key fob or remote, it sends a signal to the box to turn on the systems that start the engine.
