What does a p1101 trouble code on a PCM mean?

What the P1101 code means. When a P1101 trouble code is stored, it means that the PCM detected a discrepancy with the voltage from the MAF sensor. This problem can be detected while the PCM is running a self diagnostic called a Key On Engine Running (KOER) test.

What are the symptoms of a p0100 code?

Car: Toyota Land Cruiser 3.0 D4-D (2001) Driving symptoms: – small flutuation on acelaration when motor is with almost no charge (i.e. cruising at a constant speed 50 mph on leveled road). This is more noticeable when the en… Need more help with a p0100 code?

What does DTC stand for in Powertrain Control Module?

The powertrain control module (PCM) uses that reading along with other sensor parameters to ensure proper fuel delivery at any given time for optimum power and fuel efficiency. This P0100 diagnostic trouble code (DTC) means that there is a detected problem with the Mass Air Flow (MAF) sensor or circuit.

What is the cause of engine code p0011?

What Is The Cause Of Code P0011? 1 Engine oil is dirty 2 Engine oil is too low 3 Engine oil is incorrect viscosity 4 Camshaft variable valve timing control solenoid failure 5 Camshaft phaser is seized in the advanced position 6 Continuous oil flow to Variable Camshaft Timing chamber

What are the symptoms of a p0033 engine code?

Symptoms of a P0033 engine code may include: Whining or rattling noises from the turbocharger or turbo pipes Elevated engine and/or transmission temperature Abnormal hissing noises from the turbocharger wastegate and/or hoses

What causes an exhaust camshaft position actuator code p0013?

Here are the most common causes of an exhaust camshaft position actuator solenoid valve control circuit problem or code P0013: 1 Bad VVT solenoid (aka oil control valve) 2 Problems with the VVT solenoid control circuit 3 Issues with the PCM, such as a pending software update

What does the p0010 code on a car mean?

What Does the P0010 Code Mean? Code P0010 stands for “A” Camshaft Position Actuator Circuit (Bank 1). The code indicates that your car’s primary computer, which is also referred to as the powertrain control module (PCM), perceives a problem with one of the engine’s VVT solenoids.

What does trouble code p0011 mean on a car?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.

What is the diagnostic code for Caterpillar electronic control?

Diagnostic Code Information for Caterpillar Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} SMCS -1901-II ; 1927-II ; 1948-II ; 3168-II ; 4348-II ; 4802-II ; 4808-II ; 4810-II ; 5511-II ; 5701- II ; 7490-II ; 7494-II ; 7601-II ; 7602-II ; 7610-II