What causes the p2111 code to be set?
What causes the p2111 code to be set?
What causes the P2111 code? This code is set when the PCM sees the throttle plate sticking in an open position. Usually this is due to a faulty TPS (Throttle Position Sensor). If this code is set and the throttle plate is actually stuck open, there will be other codes set and the TPS may actually be relaying the correct information to the computer.
What does the p2101 code on the throttle plate mean?
From there, your vehicle’s throttle plate will open and close according to the signal sent by your vehicle’s PCM. The P2101 code will trigger once the PCM detects that the electronic throttle actuator is not following commands. For example, when the throttle is not opening accordingly.
When to use the p2101 code on a PCM?
The P2101 code will trigger once the PCM detects that the electronic throttle actuator is not following commands. For example, when the throttle is not opening accordingly.
What does the p2112 code mean on a Ford?
The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2112 code is set when the throttle plate is at a lower angle than commanded.
What causes a car to have a p2111 code?
Common Causes Of A P2111 Code. Possible causes of this code may include: Faulty throttle body. Dirty throttle plate or linkage. Faulty throttle position sensor. Defective accelerator pedal position sensor. Throttle actuator control motor is defective. Corroded or damaged connector.
What to do if you get a p2112 code?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P2112 code is 1.0 hour of labor.
What to do if your p2111 throttle is stuck?
If you have a P2111 and/or P2112 code with that vehicle, here is a PDF copy of the full TSB 10-21-6 bulletin . The fix involves replacing the throttle body with either part number 7T4Z-9E926-FA or 8S4Z-9E926-B.
