What causes cylinder 5 on a Ford Ranger to misfire?

The engine is also not firing all of the fuel, so raw fuel is also passing through Cylinder 5 into the exhaust. Mileage may suffer as well when your Ranger has P0305 as well. P0305 is a cylinder specific misfire code, which means that Cylinder 5 is misfiring and causing it.

What is the trouble code on a Ford Ranger?

P0304 is a relatively common trouble code with any vehicle, that includes the Ford Ranger. It’s and OBD2 code and stands for: P0304: Misfire Detected → Cylinder 4.

Where is the fifth cylinder on a Ford Ranger?

An important thing to understand when finding the location of Cylinder 5 is that it’s going to be the fifth cylinder in the firing order. It won’t be the fifth cylinder that you might see when looking at the engine. The P0305 trouble code will trigger the Ranger’s service engine soon light. The vehicle itself may begin to run rough.

What causes the p0305 trouble code on a Ford Ranger?

There are quite a few things that can cause the P0305 trouble code to trigger the Ford Ranger. Here are the most common problems that may cause it. They are presented somewhat in order from most to least likely to be causing the code: Bad Spark Plugs – Spark plugs are one of the most common causes of P0305.

Why does my Ford Ranger have a rough idle condition?

This is usually the result of a lack of compression, or fuel or spark. If just one cylinder (out of the six) is dead, you’ll have a rough idle condition when your Ford Ranger comes to a stop. Now, when you accelerate the engine, it’s going to miss. The end result is that the engine is going to use more fuel, pollute more, and have less power.

Is there a problem with the Ford Ranger p0305?

P0305 is certainly a cause for concern, and should be considered a threat to the drivability your Ranger. The nice thing about P0305 is that it’s a cylinder specific trouble code, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring.

What is the engine code on a 2006 Ford Ranger?

The code was P0316 which indicates too many misfires after startup and code P0304 which is cylinder number 4 misfire. Needless to say I had drivers behind me honking and flashing lights but the truck just wouldn’t go over about 5 mph until I was down the road a bit.

Are there any problems with the Ford Ranger?

The 99 model was riddled with electrical problems as well as engine and interior related issues. Moving a bit forward in time and the 2001 was the second worse year for the Ranger. The most complaints logged was related to transmission problems, followed by interior accessories problems.

Is there a problem with the Ford Ranger engine?

Ford is well aware of this problem. It is widespread across models with this engine, Ranger, Explorer and mustangs. Starting with model year 2001 when they began using the 4.0 SOHC until end of production of this engine, 2011 they should be held responsible for low mileage failures. My vehicle has less then 70,000 miles.

Where do I find the misfire code on my Ford 3.0L?

The check engine light will be on to let you know that you’re not imagining the engine is running rough or missing. One or more misfire codes (P0300-P0308) will be stored in your pick up’s PCM memory. P0300 Random Cylinder Misfire. P0301 Cylinder #1 Misfire. P0302 Cylinder #2 Misfire. P0303 Cylinder #3 Misfire. P0304 Cylinder #4 Misfire.

Where can I buy a 2001 Ford Ranger?

See pricing for the Used 2001 Ford Ranger Super Cab Pickup 4D. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 2001 Ford Ranger Super Cab Pickup 4D. View local inventory and get a quote from a dealer in your area.

How to troubleshoot the fuel injection for a Ford Ranger?

If power is supplied to the pump but the pump doesn’t come on, replace the pump. If no power is supplied to the pump, replace the fuel-pump relay. If fuel pressure is normal go to the next step. Unplug one of the wiring-harness connectors attached to the fuel injectors. Plug the injector-harness tester into the harness connector.

How to test a Ford 4.0L V6 misfire problem?

P0300 Random Cylinder Misfire. P0301 Cylinder #1 Misfire. P0302 Cylinder #2 Misfire. P0303 Cylinder #3 Misfire. P0304 Cylinder #4 Misfire. P0305 Cylinder #5 Misfire. P0306 Cylinder #6 Misfire. Sometimes, even tho’ the engine is suffering a bona-fide misfire, no misfire codes are registered and no check engine light (CEL) comes on.

What causes a misfire condition on a Ford Ranger?

What’s Behind A Misfire Condition? As you’re already aware, the 3.0L engine in your 1995-2008 Ford Ranger (Mazda B3000) has 6 cylinders and each one needs air (compression), fuel, and spark to be able to produce power. Therefore a dead cylinder is a cylinder that is not producing power.

What does cylinder 6 on a Ford Ranger mean?

Mileage may suffer as well when your Ranger has P0306 as well. P0306 is a cylinder specific misfire code, which means that Cylinder 6 is misfiring and causing it. An important thing to understand when finding the location of Cylinder 6 is that it’s going to be the sixth cylinder in the firing order.

Is there a problem with the Ford Ranger p0306?

P0306 is certainly a cause for concern, and should be considered a threat to the drivability your Ranger. The nice thing about P0306 is that it’s a cylinder specific trouble code, which makes diagnosing the problems much more simple than P0300, which means that the cylinders are randomly misfiring.