What attachments can be used on a forklift?

7 Most Common Forklift Attachments Explained

Sideshifter. Side Shifters are one of the most common attachments used today.
Fork Positioner. Fork Positioners allows the forklift forks to be positioned hydraulically.
Paper Clamps.
Push/Pull Attachment.
Multiple Pallet Handler.
Fork Extensions.
Rotators.

What are forklift Tynes?

Forklift forks, also known as tines or blades, are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.

Are forklift forks universal?

People who don’t work with forklifts all the time often assume that there is only one type of forks that fit onto lift trucks. There are actually many different types of forks, most of which are interchangeable depending on how you plan to use your forklift.

Can you use fork extensions on a forklift?

Are Forklift Extensions Legal? Forklift boom extensions are legal, but they come with rules to prevent accidents. They should not exceed 1.5 times the length of the forks and must be able to support an evenly distributed load of three times its rated capacity.

What are forklift accessories?

Forklift Extensions & Forklift Truck Attachments

Lifting Slings. Rigging. Load Weighing Equipment. Wall Mounted Jib Cranes.
Lifting Jacks.

What is a forklift attachment?

Attachments allow your forklift to become more efficient and versatile with handling unique material handling products. An attachment can enable a lift truck to push, pull, clamp, lift, side shift and rotate any load imaginable.

What are fork Tynes?

Eye-Type Fork Tynes/ Fork Arms / Load Arms for Forklift Eye type tynes and accessories to suit forklifts and loaders that are fitted with pin type carriages. Capacity ranges from 1,000kgs to 32,000kg. Lengths from 1070mm to 3600mm.

Are forklift forks standard?

Standard – This is the most common fork taper. It is perfectly suitable for picking up most pallets and skids. No beveling, normally, tapers begin 16″ to 24″ from tip and end with a 3/8″ tip.

What is a class 2 fork?

The most common of fork is the ITA style which are divided up into classes. These classes define the carriage height that they can mount to. Class 2 = 16″ Carriage Height (1500-5500 lbs. capacity) Class 3 = 20″ Carriage Height (6000-11,000 lbs.

How much do the forks weigh on a forklift?

With that being the factor, expect the forklift fork weighs around 6.9 kgs. to 14.4 kgs. Here are some examples of forklift forks: Block forks – used to lifting cement blocks, the blade is narrower at 2 inches (W) x 1.5 Inches (T)

Can a lift truck with a 6000 lb capacity at a 24?

For example, a forklift rated to carry 6,000 lbs at a 24″ would have a maximum load moment of 144,000 pounds. This equation is useful for determining if an unusual load (e.g., one longer than 48″ or with uneven weight distribution) can handle safely.

What is the rule for fork extensions?

OSHA Guidance for Forklift Fork Extensions These are a few safety rules to keep in mind when using fork extenders. 1) Forklift fork extensions must not exceed 1.5x the length of the fork. 2) Only use extenders that match the width of your forks. 3) Never exceed the load capacity printed on the fork extenders.

What are the attachments on a forklift for?

Blade extensions (or slippers) slide onto the forklift tines to extend their reach. These are common attachments which increase the ability of the forklift to lift larger loads.

What is the norm for a forklift?

The forklift norm is to have two tynes moving vertically carrying pallets/loads from point A to B, but have you ever thought that a forklift could be so much more? With a large variety of hydraulic and non-hydraulic attachments, your forklift has the potential to do a number of tasks that you never thought possible.

How many forks are in a single double forklift?

Single-Double Pallet Handlers transport single or two pallets side by side. Spreading the four forks allows handling of two pallets side by side. When brought together, the four forks convert into two forks ready for single pallet handling. Forks are hydraulically or manually positioned.

Can a Ope Rator drive a forklift?

Ope rators may be perfectly trained and capable of driving and operating a normal forklift but they must also receive the proper training for the attachment they are operating.

What attachments can be used on a forklift?