What are the maintenance intervals for a backhoe loader?

420E, 430E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS Maintenance Intervals Excerpted from Operation & Maintenance Manual (SEBU7687-08)

What makes a caterpillar backhoe a good loader?

Caterpillar®Backhoe Loaders set the industry standard for operator comfort, exceptional performance, versatility and jobsite efficiency. With standard pilot-operated joystick controls, a more comfortable operator station, new extendible stick design and increased performance, the 420E/420E IT lets you get more done with less effort.

How long does a caterpillar backhoe oil change take?

Note:If Cat HYDO Advanced 10 hydraulic oil is used, the hydraulic oil change interval will change. The normal interval of 2000 hours is extended to 3000 hours. S·O·S services may extend the oil change even longer. Consult your Caterpillar dealer for details.

What kind of hoses does a backhoe loader use?

Made of four overlapping, insulated wire spiral wraps bonded together for durability, Cat XT-3 ES (Enhanced Spiral) ToughGuard hoses exceed SAE certification standards. The hose routing protects them from work damage, and hose failure is substantially reduced.

What is the SMCs code for a backhoe?

SMCS Code:7000 Ensure that all safety information, warnings and instructions are read and understood before any operation or any maintenance procedures are performed.

How to replace a battery on a backhoe loader?

Battery or Battery Cable – Inspect/Replace SMCS Code:1401 1. Turn the engine start switch to the OFF position. Turn all switches to the OFF position. 2. Disconnect the negative battery cable from the frame. Note:Do not allow the disconnected battery cable to contact the frame of the machine. 3. Disconnect the negative battery cable at the battery.

What is specalog for 430e it backhoe loader?

Specalog for 430E/430E IT Backhoe Loader, AEHQ5684-02 Engine Engine Model 3054C DIT Gross Power – SAE J1995 75 kW 101 hp Net Power – SAE J1349 72 kW 97 hp Weights Operating Weight – Nominal 7294 kg 16,066 lb Operating Weight – Maximum 10 700 kg 23,568 lb Backhoe Dig Depth – Standard 4698 mm 15 ft 5 in Dig Depth – Extended 5951 mm 19 ft 6in

420E, 430E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS Maintenance Intervals Excerpted from Operation & Maintenance Manual (SEBU7687-08)

What kind of reference system does caterpillar backhoe loader use?

Caterpillar is revolutionizing excavation with new technology solutions. The AccuGrade Reference Systems for Backhoe Loaders are entry-level grade and depth check systems that provide accuracy, productivity, lower operating costs and enhanced profitability. pg. 14 Work Tools

How do you turn off a backhoe loader?

1. Turn the engine start switch to the OFF position. Turn all switches to the OFF position. 2. Disconnect the negative battery cable from the frame. Note:Do not allow the disconnected battery cable to contact the frame of the machine. 3. Disconnect the negative battery cable at the battery. 4.

How do you hook up a new solenoid to a starter?

Use the labels you placed on the wires to guide you as you connect the wiring to the new solenoid. The top and bottom wires will go in exactly the same places as they did on the old solenoid. If your replacement solenoid has four terminals and you have three wires, attach the third wire to the terminal marked with an “S”.

How do you Grease a backhoe loader stick?

Apply lubricant to the grease ﬁtting (2) for the head end of the boom cylinder and the head end of the stick cylinder. Apply lubricant to the grease ﬁtting (3) for the rod end of the boom cylinder. Apply lubricant to the grease ﬁtting (4) for the boom pivot. There is one grease ﬁtting on each side of the machine.

What to do with a backhoe loader pivot?

Operate all auxiliary controls with thumb rollers. Move from job site to job site quickly and smoothly with the additional 6th gear on the autoshift transmission and optional lock-up torque converter. The ergonomic, automotive style operator station helps you work comfortably and productively all day long.

Can a solenoid be removed from a starter?

If you can access the solenoid easily without removing the starter, there is no need to remove it. Be sure to keep the bolts you remove in a safe place for reuse when putting the starter back in. Unbolt or unscrew the solenoid from the starter. The starter solenoid is usually held in place by two screws.

How do you install a solenoid on a craftsman lawn tractor?

Make sure you have your model number on hand when doing this. Connect both the wires back onto the solenoid’s bolts on either side of the part using your socket wrench. Place the wiring harness back onto the solenoid and ensure it makes contact with the Craftsman solenoid’s metal electrical connectors.

What are the controls on a backhoe loader?

The Cat 430F2 Backhoe Loader puts all the machine controls at the operator’s fingertips. Operate all auxiliary controls with thumb rollers. Move from job site to job site quickly and smoothly with the additional 6th gear on the autoshift transmission and optional lock-up torque converter.

How much does a 420E backhoe loader weigh?

Specalog for 420E/420E IT Backhoe Loader, AEHQ5685-02 Engine Engine Model 3054C DIT Gross Power – SAE J1995 69 kW 93 hp Net Power – SAE J1349 66 kW 89 hp Weights Operating Weight – Nominal 7025 kg 15,474 lb Operating Weight – Maximum 10 700 kg 23,568 lb Backhoe Dig Depth – Standard 4360 mm 14 ft 4 in Dig Depth – Extended 5456 mm 17 ft 11 in

What’s the difference between a caterpillar 420E and 420E?

With standard pilot-operated joystick controls, a more comfortable operator station, new extendible stick design and increased performance, the 420E/420E IT lets you get more done with less effort. AccuGrade®Reference Systems for Backhoe Loaders Caterpillar is revolutionizing excavation with new technology solutions.

Which is accugrade reference system for backhoe loader?

The AccuGrade Reference Systems for Backhoe Loaders are entry- level grade and depth check systems that provide accuracy, productivity, lower operating costs and enhanced profitability. pg. 14 Work Tools A new hydraulic thumb is part of the wide range of Cat®Work Tools that are available to meet the needs of your jobsite applications.

Why is my backhoe bucket lift not working?

CAT 416 Backhoe. The bucket lift suddenly became very weak and would hardly lift half way up. Working another control would seem to make the bucket lift momentarily. All the other hydraulics still worked flawlessly. The problem turned out being the o-ring seals on the check valves in the hydraulic valve group.