What are the diagnostic codes for Cummins ISX?

Cummins diagnostic trouble codes for ISX, ISF 2.8, ISB, ISC, ISLe, 4ISBe, 6ISBe, ISDe, ISM, QSM, QSX engine control units

When does an ISX fault code become active?

The pressure in the intake manifold exceeded the maximum allowable value for a given engine rated power. This DTC becomes active when the pressure in the intake manifold exceeds the maximum allowable value for a given engine power rating. ISF 2.8, ISF 3.8, ISB, ISC, ISL, ISLe , ISDe , QSB 3.3

When do I get the fault code 2398?

The fault code is set when the actual position of the drive changes the geometry of the turbocharger does not match the specified for more than 10 seconds. Error code 2398 Engine:

What are the fault codes for Cummins engines?

Cummins engines fault codes list Error code 111 Engine: ISF 2.8, ISF 3.8, ISB, QSB, QSC, ISL, QSL, ISM, QSM, ISX, QSX Error: ECM internal failure. Description: This DTC can only occur if there is a problem inside the ECM.

What does SPN 1569 mean on a Cummins Engine?

spn 1569 relates engine protection torque derate -condition exists. critical fault codes related to engine operation are active code 1 means urgent attention A sort of limp mode setting that requires immediate attention by a cummins service center to prevent further damage to the engine

How to use the Cummins product finder site?

Use the full Product Finder to search or filter by product details. … … We are launching that site for you now. Thank you.

Cummins diagnostic trouble codes for ISX, ISF 2.8, ISB, ISC, ISLe, 4ISBe, 6ISBe, ISDe, ISM, QSM, QSX engine control units

Where are the cylinders on a Cummins ISX 500?

The cylinders are numbered from the front of the engine (1-2-3-4-5-6). The engine firing order is 1-5-3-6-2-4. If the engine is not equipped with an air compressor: Loosen the capscrews and rotate the cover or remove the oil fill tube, if equipped.

What does the ISX stand for in diesel engine?

It upheld its name because it had an innovative fuel system called the “Interact System.” The “IS” in ISX stands for “Interact System.” Since its launch, the ISX has been the core of Cummins’ diesel engine fleet. Not only has it advanced with quicker processing, but it has also increased fuel efficiency since its debut.

Is there a company that makes Cummins ISX engines?

In this guide, we’ll discuss how the company started as a strong partnership with the Cummins ISX, then transformed into an impressive engine manufacturing company. Diesel Pro Power will take you through the Cummins ISX specs, common issues and featured products, whether you have one of the original units or a modern version.

What are the trouble codes for Cummins ISX engines?

These Cummins trouble codes pertain to ISX engines built with the EGR system, but pre-DPF (2002 – 2006). 115 Engine Magnetic Speed/Position Lost Both of Two Signals – Data Erratic, Intermittent, or Incorrect 122 Intake Manifold 1 Pressure Sensor Circuit – Voltage Above Normal, or Shorted to High Source

How often does the fuel injector activate in an ISX engine?

Then, it’s distributed through the tubing to the rail system for storage under extreme pressures— about 35,000 PSI or higher. This version of the ISX relies on an engine control module (ECM) to monitor the timing and pressure. The ECM can activate each fuel injector up to five times per combustion cycle.

What does it mean when check engine light is on but no codes?

No code being generated on the reader does not mean the driver is in the clear. In fact, when the light is on, the odds are just as high that there has actually been something wrong for a while even if no code is generated.

What’s the code on my Cummins ISX 15 check engine light?

I got a 2013 Peterbilt with a Cummins isx 15. For the last two weeks I’ve been getting a check engine light with code spn 157 FMI18 Fuel rail pressure, code reads fuel rail pressure valid but below average. Truck sat for two weeks over holidays and I replaced both fuel filters and the fuel rail pressure sensor.

What should I do if my check engine light is still coming on?

Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step. Once it is done, see if the engine check light is still coming on or not. If the check light is off, you are ready to go, but if it is still coming on, get ready by reading the codes with a scanner instead. Let it Go Off Itself

What kind of SCR does Cummins ISX cummings use?

The ventilated exhaust lowers the combustion chamber temperature. The ISX Cummings started featuring the selective catalytic reduction (SCR) system in 2006. It injects urea, which is an active element in diesel exhaust fluid (DEF), into the exhaust.

How much torque does a Cummins ISX15 have?

Cummins ISX15 and QSX15 Signature engines Cylinder Head Bolt Torque. Step 1 = 203 Nm, 150 lb.ft Step 2 = 407 Nm, 300 lb.ft Step 3 = Rotate 90 degrees

How many horsepower does an ISX Cummins Engine have?

Cummins Engine Model: ISX – CM871 Engine serial number: 79338164 Engine total distance: 1.023.881 Advertised horsepower: 385 Hp Date of manufacture: 2008 CPL: 2732 Visit for more informati… See More Details

When did Cummins start issuing ISX fault codes?

These codes pertain to the ISX engines built between 2007 and 2010. These engines are easily identified by having a DPF and regen on a regular basis. These codes do NOT pertain to engines using DEF.

How much did it cost to clean a 2009 Cummins ISX?

They had it for three days and charged me for 10 hours of labor, $500.00 for the DPF cleaning, a couple gaskets and a clamp, about $1,800.00 out the door. I left, parked for the night and the next morning, drove 180 miles to deliver a load.

What is the fault code for a Cummins truck?

CUMMINS ISX Fault Codes DTC. Cummins ISX Codes 111-500. 111 Electronic Control Module Critical Internal Failure – Bad Intelligent Device or Component. 115 Engine Magnetic Speed/Position Lost Both of Two Signals – Data Erratic, Intermittent, or Incorrect.

Why is the speed sensor not working on my Cummins truck?

The engine speed signal from the camshaft position sensor is not detected. Possible causes for this DTC are damage to the camshaft position sensor, an open or short circuit in the circuit, or a fault in the power circuit. The engine speed signal from the crankshaft position sensor is not detected.

How to find the fault code for a Cummins Engine?

Cummins Fault Codes list for QSB, QSC, QSL9, QSM11, QSX15, QSK19, QSK23, QST30, QSK45, QSK60, QSK78 engines. To determine the malfunction, you just need to write out the fault code from the device in the cab and find the codes in the table by selecting your own engine type. Fault code (LAMP) SID, PID FMI. SPN.

What are the common problems with a Cummins ISX?

Clogged inlets came about in 2010 when recirculation was occurring, also affecting HP. Depending on the version you have, common Cummins ISX engine problems involve the turbocharger, EGR, camshafts and timing wedge: The turbocharger is one of the most notorious ISX failures and is expensive to fix.

What causes a Cummins engine to short circuit?

Incorrect amount of fuel in the nozzle in one of the cylinders from the 4th to the 6th. Oil pressure sensor chain after oil filter-short circuit. The chain of the oil pressure sensor after the oil filter is a breakage of the chain.

What does the Mil light on a Cummins Engine mean?

Check Engine Lamp Lights up to warn the driver to seek service soon. Flashing Check Engine Lamp Will flash for 30 seconds at key ON if maintenance is due. Malfunction Indicator Lamp (MIL) Lights up to warn the driver to schedule service soon. May light up in addition to other lamps. Red Stop Engine Lamp

Are there any Cummins ISX diesel engines for sale?

(GOOD USED/ RUN TESTED/ FULLY INSPECTED) 2009 Cummins ISX Diesel Engine for sale (EPA07), Service Model Name: CM871, CPL 2732, 425HP @ 1800 RPM, Serial # 79416215, Engine Configuration D103006BX03… See More Details 2006 Cummins ISX used diesel engine for sale . 400 HP, CPL 8520 tested and inspected with warranty.

What are the diagnostic codes for Cummins ISX?