Is there an amp in the back of my Blazer?
Is there an amp in the back of my Blazer?
Well, just before this starting happening, my son and I installed a sub and amp in the back of the Blazer.
Is there a problem with my Chevy Blazer 4×4?
Yes my name is kyle and I have a 1999 chevy blazer 4×4 and i have the same tccm problems like everybody else but my only problem is that i need the new 32 pin femal plug and the 4pin female cause my tccm is in working condition. I can’t find then plugs and wires anyplace i know what are odds there.
Why does my Blazer vibration go away when turning left?
You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.
Is the 4Lo button on a blazer working?
I also now notice (in testing it) that the Auto 4WD, 2HI, and 4HI buttons work, but that the 4LO button just blinks when pushed (in neutral). I have to push one of the other buttons to get out of it.
Well, just before this starting happening, my son and I installed a sub and amp in the back of the Blazer.
Is the 4×4 light on on my Blazer?
I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.
Why is my Blazer still picking up speed?
2) The Blazer still picks up speed and drives well except for the rubbing/vibration now. Would having pulled out and put back in the dash switches or being in such close proximity to the TCCM caused issues?
I also now notice (in testing it) that the Auto 4WD, 2HI, and 4HI buttons work, but that the 4LO button just blinks when pushed (in neutral). I have to push one of the other buttons to get out of it.
Yes my name is kyle and I have a 1999 chevy blazer 4×4 and i have the same tccm problems like everybody else but my only problem is that i need the new 32 pin femal plug and the 4pin female cause my tccm is in working condition. I can’t find then plugs and wires anyplace i know what are odds there.
You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.
I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.
2) The Blazer still picks up speed and drives well except for the rubbing/vibration now. Would having pulled out and put back in the dash switches or being in such close proximity to the TCCM caused issues?
Why does my Blazer make a rubbing noise?
Anyway, I have this rubbing/vibration noise that just started; can feel it immediately even at low speeds, almost like driving with studded tires; gets louder the faster I drive. If I turn the wheel to the right, same thing; to the left… goes away.
Where did the Chevy’s 10 Blazer come from?
CHEVROLET CHEVY S-10 BLAZER ORIGINAL OWNER/MILES FIRST $7500 TAKES THIS BEAUTY. ARIZONA PURCHASED AT WHAT WAS LOU GRUBB CHEVROLET 27TH AVE AND CAMELBACK IN PHOENIX, AZ.
Is there a 1988 GMC Jimmy S10 Blazer for sale?
1988 Prostreet GMC Jimmy/ s10 Blazer I have relisted this truck because it was allegedly purchased by a 5 year old and he couldn’t come up with the funds to finish the deal! Please if you don’t have the funds to purchase, do not click on anything!
Why does my blazer have a 3 button 4WD vacuum?
If you have a 3 button 4WD, there is likely a vacuum switch on top of the transfer case that is easy to replace. It often fails. Finally, a vacuum leak can be caused by a few other things but they may not be detrimental enough to cause the 4wd to not engage.
What kind of car is a 1998 Chevy Blazer?
Key words Camaro Chevy GM GMC project street rod rat rod pro street hot rod LS1 SBC BBC LS7 LS3 LQ9 LQ4 LM7 drag race street race big tire small tire fast and loud street outlaws delivery truck grocery getter 1998 Chevy S10 Blazer with 225110 miles.
Why does my Chevy Blazer not go over 20 mph?
Won’t go over 20 mph. Starts right up. New plugs and wires. Never really cuts off. Runs hot but not extremely. Mass air flow is usually an intermitant problem. This sounds more like a stopped up catylist converter. take the cat off and run it, see if it gets hot, most likely that will be the problem]
Why does my blazer have a bad bearing?
OK; got the Blazer back from the shop. You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front).
When does a 2001 Blazer start to bog down?
I have a 2001 Blazer, last week as I was climbing a hill I attempted to accelerate and heard a “pop” and my engine started to bog down. Over this last week the bogging down has got progressively worse but only happens when you attempt to accelerate.
OK; got the Blazer back from the shop. You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front).