Is the fuse panel on a Chevy truck?
Is the fuse panel on a Chevy truck?
NOTE: If the fuse panel on your 510089 ‘69-’72 Chevy truck kit DOES NOT have a sticker like the photo at the left, you have the first design harness and your instructions are listed below and follow this page. 92972640 rev. 0.0 .
What happens when you turn on the headlights?
When you turn on your headlights, that switch activates a relay. That relay, in turn, actually provides the electrical connection between your headlight bulbs and the battery. Fuses are also involved in order to provide a sacrificial failure point to protect the rest of the wiring.
What should I do if my headlight light is not working?
The best way to do this is to turn the headlight switch on, connect the negative lead on your meter to a known good ground, and touch the positive lead to each headlight connector terminal. One of the terminals should show battery voltage, and the other two should show nothing if the problem is burned out bulbs.
How does a headlight switch turn on a high beam?
In the same way that your headlight switch activates a relay to provide power to the headlights, operating your high beam control will generally activate a relay to turn on the high beams. In the case of dual filament headlight capsules, this literally sends power to the high beam filament.
Where is the fuse on the dash light?
The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
Why are the lights on my dash not working?
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
How are the tail lights and dash lights connected?
Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. [ [Image:Fix Dashboard Lights That Won’t Light Step 2 Version 3.jpg|center]]
Where are the lights on the dashboard located?
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.
