How wide is a 1970 Chevelle rear end?

Chevelle & Ford Rear End Widths

Outside Width	Year	Model
60.50	1964-1967	Chevelle
62.00	1955-1959	Chevy Pickup
61.25	1968-1972	Chevelle
62.50	1970-1981	Camaro/Firebird

How wide is a 57 Chevy?

Chevrolet Bel Air Sedan, 1957 MY 2400 2403; 1019D

bodywork
Length	5080 mm	200 inches
Width	1876 mm	73.9 inches
Height	1521 mm	59.9 inches
Ground clearance

How wide is a 1970 Monte Carlo rear end?

big gear head ’64 to ’67 Chevelle and El Camino rear ends are 60 inches wide and ’68 to ’72 Chevelle, El Camino and ’70 to ’72 Monte Carlo rear ends are 61 inches wide.

What was the rear end width of a 1967 Chevelle?

According to an old article, Inside ’64 — ’72 A-Bodies, (Car Craft Magazine), 1967 was a transition year in that A-body cars might have a 1964-66 style rear end, a 1968-72 rear end (which is wider, and commonly available), or a “hybrid” rear end, which will have the 60.5-inch width, but with the early spring mounting pad and trailing arm brackets.

What are the dimensions of a rear end?

The following is a general list of rear ends and their dimensions to help narrow the search for a possible candidate to replace the torque tube rear end or just get a better set of gears for highway driving. Advance Design Trucks seem to be using rear ends with widths ranging from 58″- 62″. I’m not sure of the Task Force width ranges at this time.

What’s the gear ratio on a GMC Dana 60?

60″ 60’s GMC and some Chevy’s Dana 44 or Dana 60 with leaf springs 6 lug, Gear ratio’s 3.21 to 3.92. GMC V-6 used a 3.21 Dana 44 used a standard chevy 1310 yoke, Dana 60 used the heavy duty yoke which takes the larger 1350 yoke. Approximate rear end widths measured from backing plate to backing plate.

What are the dimensions of a rear axle?

Rear axle widths These dimensions do not include brake drums and are measured from backing plate to backing plate. Actual wheel track could be as much as 6″ to 8″depending on drum size: 46″ to 47″ ’66 to ’77 Bronco 48″ to 49″ ’72 to ’75 Datsun pickup

How to measure the rear axle of a GMC V-6?

GMC V-6 used a 3.21 Dana 44 used a standard Chevy 1310 yoke, Dana 60 used the heavy duty yoke which takes the larger 1350 yoke. Approximate rear end widths measured from backing plate to backing plate. Add Width to compensate for drums as follows:

How big is the rear end of a car?

Approximate rear end widths measured from backing plate to backing plate. Add Width to compensate for drums as follows: 4″ – 5″ for small cars 5″ – 6″ for intermediate cars 6″ – 8″ for large cars 48″ – 49″ 50″ – 51″

60″ 60’s GMC and some Chevy’s Dana 44 or Dana 60 with leaf springs 6 lug, Gear ratio’s 3.21 to 3.92. GMC V-6 used a 3.21 Dana 44 used a standard Chevy 1310 yoke, Dana 60 used the heavy duty yoke which takes the larger 1350 yoke. Approximate rear end widths measured from backing plate to backing plate.