Most popular

How to turn off auxiliary power when car is off?

How to turn off auxiliary power when car is off?

Click to expand… That suggests another option for the OP or others that want a memory-proof “auto-off” power port without disassembling the console to get to the back of the OEM sockets …. One could wire the F87 triggered key-off=power-off relay to a hacked adaptor or 12v-socket extension that plugs into an always-on socket.

Why does my Ford PowerStroke not shut off?

Inside this hole is a sheet metal tab you need to depress. Rotate the key to the Run position, push the tab in with something, and draw it straight out. On the older ones there is a little button you push in with a small screwdriver you never have to drill a ignition unless you do not have a key for the lock cylinder.

Why does power stay on when key off ignition switch toasts?

The circuits affected: Heater fan, radio, windows, rear window defroster and a small amount of power to the wipers (enough to make the relay click when you turn them on, but not enough power to make the motor run – weird!). I believe all those circuits have their own relays and fuses.

What happens when you take the key out of the ignition?

None of the instruments light up with the key off or out and the car starts and runs normally. I know there’s a feature described in the owner’s manual that the windows will work with the key removed until one door is opened and closed. But I don’t see anything in the manual about the other equipment operating.

Click to expand… That suggests another option for the OP or others that want a memory-proof “auto-off” power port without disassembling the console to get to the back of the OEM sockets …. One could wire the F87 triggered key-off=power-off relay to a hacked adaptor or 12v-socket extension that plugs into an always-on socket.

The circuits affected: Heater fan, radio, windows, rear window defroster and a small amount of power to the wipers (enough to make the relay click when you turn them on, but not enough power to make the motor run – weird!). I believe all those circuits have their own relays and fuses.

When does the key off battery go off?

When the ignition switch is in the START position, battery voltage should be present at the GEM/CTM start/clutch depressed input. The 45 minute time is in part of the GEM module. The GEM module does not have an OFF or LOCK Switch State input. The GEM will assume the OFF or LOCK position when there are no RUN, ACC, or START signals present.

Where are the power adapters when the car is off?

There is a 12V power source up front by the gear shift as well as one inside the center console. Both of these power options remain on when the car is off, however.

Author Image
Ruth Doyle