How to reset the fuel pump reset switch in a 2003 Ford Ranger?

Push the small round button to reset the fuel pump cutoff switch. Start the vehicle and allow the vehicle to run for a few seconds. Shut off the vehicle and check the vehicle for any fuel leaks before operating the vehicle normally. Ford Truck Enthusiasts: 2003 Ford Ranger Overview.

Where is the reset button on the fuel pump?

Check underneath the vehicle for any fuel leaks. Enter your vehicle from the passenger side and locate the fuel pump shutoff switch near the underside of the glove compartment, on the lower right side. The fuel pump cutoff switch has a small round button. Push the small round button to reset the fuel pump cutoff switch.

How to reset the fuel switch on a Ford?

FORD FUEL RESET SWITCH LOCATION. FORD DOES NOT START FIX. HOW TO RESET FUEL SWITCH – YouTube If playback doesn’t begin shortly, try restarting your device.

What causes a Ford fuel pump to shut off?

If your Ford ever fails to start or stalls on you suddenly, the first thing to check is the inertia fuel shut-off switch. The switch is designed to trip and cut power to the fuel pump in the event of a collision, but you can also trigger it by hitting a large bump or pothole as well.

How do you reset the fuel pump shut off switch?

The inertia switch is a security measure implemented by car manufacturers to shut off the fuel supply in case of a car crash or accident where a vehicle comes to a sudden stop instantly. How to Reset Fuel Pump Shut Off Switch Similar to an electrical circuit breaker in your home, you can reset it by pushing the button or pulling the leverage down.

How can I reset the fuel cut off?

This is similar to an electrical circuit breaker in your home which can be easily reset by pushing the button or pulling the leverage down. All modern fuel injection cars are equipped with an inertial fuel cut off switch that shuts off the power supply for the fuel pump if the vehicle is in a collision.

Where is the shut off switch on a Ford truck?

If you own one of Ford’s pickup, SUV or van models, you can find the shut-off switch under the dashboard on the passenger or driver side, depending on what year it was built. If you own one of Ford’s car models, you may find it located in the trunk compartment.

Is there a way to reset the Ford fuel shut off?

To reset your Ford’s inertia switch, press down on the reset button. Although the location of the shut-off switch varies by year and model, Ford has stuck with a few common spots over the years.

How do you reset the fuel pump switch?

The fuel pump cutoff switch has a small round button. Push the small round button to reset the fuel pump cutoff switch. Start the vehicle and allow the vehicle to run for a few seconds.

Where is the reset button on a fuel inertia switch?

Through this access hole you will be able to see the reset button on top of the inertia switch. On other vehicle models, the inertia switch is located on the passenger’s side floor pan, under the dashboard.

What to do when your Ford Ranger runs out of fuel?

If you think it is wiring you can always run a new power feed from the relay to the fuel pump and make sure the ground is good. Next check is the fuel pressure regulator, your looking for fuel coming out the top and bleeding into the vacuum line thus flooding the engine.

How can I tell if my fuel pump relay is faulty?

2. Engine does not start. Another symptom of a faulty fuel pump relay is an engine that does not start. If the fuel pump relay fails the fuel pump will be left without power. The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel.

Why does my Ford Ranger stall while driving?

I had this same problem with a 2004 ford ranger 4.0 liter by 5 speed manual and went through the fuel pump and filter fuel pump relay the coil pack crank sensor and a bunch of checking grounds. Finally pulled the inertia switch off and the plug was melted and just bypassed it and shes run good since then.

Can you hear the fuel pump running in a Ford Ranger?

You can hear the pump running when you turn the ignition key to the “start” position. Have a partner sit in the driver’s seat. Take the gas cap off and have your partner turn the ignition key to “start.”

Where do you find the fuel pump relay?

When you shut off the ignition, it powers down the fuel pump. In most vehicles, the fuel pump relay can often be found in the fuse box in the engine bay, which is usually a long black box which contains fuel pump relay along with various other fuses and relays.

What happens when the fuel pump relay goes bad?

If the fuel pump relay suddenly fails, it will light up the check engine light and store a trouble code on the fuel pressure. The fuel pump relay going bad can affect the fuel pump’s power and affect fuel delivery to the engine.

Why does my 2008 Ford Ranger not start?

We purchased a 2008 Ford Ranger 3 months ago, everything was good until it got cold outside. As soon as the temperature is around 0% C. the truck turns over but won’t start. (usually have to try 3-4 times before it finally starts, then runs well, as soon as the engine gets cold, same thing, won’t start)

What is the Ford Ranger Anti theft system reset procedure?

Once it blinks start the engine and the vehicle will now be reset. If the engine does not start then You did not turn the key on and off quickly enough. The car is not starting. Flashing red light key shows that it is locked. How can we solve this? How to disconnect the slarm system.?

When does the theft light go out on a Ford Ranger?

Btw, the theft light is supposed to blink every 2 seconds when key is out (as deterrent to thieves) , and should go out after it starts or in the start position longer than 2 seconds. My light would blink with the key out, but when I was in the start position it would stay on solid. I could crank my engine (ree-ree-ree-ree) but it would not start.

How do you replace shocks on a Ford Ranger?

Raise the Ranger, remove the jack stands and lower the Ranger to the ground. Tighten the lug nuts. Place wheel chocks in front of each front tire. Raise the rear of the Ranger and support with jack stands on each side of the axle at about the middle of each axle tube. It is not necessary to remove the wheels.

Where is the emergency fuel shut off switch?

Emergency Fuel Shut Off Switch Location on Other Cars On Ford, Peugeot, VW, Citroen, Vauxhall, Subaru, Renault, Toyota and Mazda, inertia switch location is usually on one of the following two hidden places: Behind or below glove compartment, sometimes hidden under the carpet; Under side-panel located next to the drivers’ door;

To reset your Ford’s inertia switch, press down on the reset button. Although the location of the shut-off switch varies by year and model, Ford has stuck with a few common spots over the years.

How is the fuel pump inertia on a Ford Ranger?

Shop AutoZone for Ford Ranger Fuel Pump Inertia Switch. 0.0 out of 5 stars. Notes: Universal. With electric fuel pump

FORD FUEL RESET SWITCH LOCATION. FORD DOES NOT START FIX. HOW TO RESET FUEL SWITCH – YouTube If playback doesn’t begin shortly, try restarting your device.

How to reset the fuel pump reset switch in a 2003 Ford Ranger?