How to repair a GMC Vortec fuel injector?

1. Heat the hose like you did before. Heating only the very end will help you keep from kinking. 2. Slowly press the poppet back in, don’t rush it. 3. let it fully cool and give it a few good tugs to make sure it set.

What kind of engine does a Chevy Vortec have?

Chevy 5.7 Litre Vortec Specs & Information. General Motors placed the 5.7 liter L31 Vortec in several of its trucks, including the Chevrolet C/K, the Cadillac Escalade and the GMC Yukon.

How much fuel pressure do you need for a Vortec injector?

They need to be able to hold 60lbs of fuel pressure. If in doubt take an old piece of tubing to the local auto parts store and get some double walled plastic gas line tubing. Ford uses quite a bit of it, as does BMW. 1. Carb Cleaner

What are the symptoms of a bad fuel injector assembly?

Symptoms Of A Bad ‘Spider’ Fuel Injector Assembly. The most common type of failure (related to the ‘Spider’ fuel injector) is usually not the assembly itself going bad, but the fuel pressure regulator going bad. The fuel pressure regulator is infamous for leaking fuel from its vacuum inlet nipple.

When is Spider injector 5.7 Vortec out of stock?

Only 16 left in stock (more on the way). . Only 13 left in stock – order soon. . . In stock on July 26, 2021. . Only 12 left in stock – order soon.

What should I do about my Chevy Blazer fuel injector?

If your reading this then like I did you have been searching the web and under the hood of you GMC Jimmy, S10, Astrovan, Or Chevy Blazer trying to figure out what to do about that crazy injection system in your truck. Well you have a few choices 1. Buy a new spider set for a small fortune.

Can a bad fuel injector be changed out?

There are a number of injector treatments on the market that can help to break up these types of deposits. Eventually, even the treatments will not be able to get the injectors back in good shape and they will need to be changed out. A bad injector can wreak havoc on an engine and will have to be replaced immediately to restore functionality.

What kind of fuel injector does a GMC Spider use?

This TamerX Central port Fuel Injection Assembly For The 1996-1999 Chevrolet/GMC Spider Fuel Injector Assembly GM 5.0L and 5.7L GM V8 Engines. This is a completely remanufactured SCPI Fuel Injector. The TamerX Spider Assembly is 100% tested to meet or exceed OEM Specifications.

What kind of engine does a Chevy Tahoe have?

My 99 Tahoe with 5.7 Liter Vortec has had the same problem (rough idle at low RPM only when warmed up) for the last few months.

What should the fuel pressure be in a Chevy Tahoe?

When it is running, fuel pressure stays constant at 54 psi, but again once when shut off it bleeds off down to 30 psi. I have read that the fuel pressure needs to stay within 5 psi for 5 minutes or there is a leaky injector or a fuel pump check valve.

Is the tamerx Vortec Spider fuel injector kit covered?

This is a top quality remanufactured TamerX Vortec Spider Fuel Injector assembly and plenum gasket kit. This product is covered by our one year, unlimited mileage warranty. This kit includes all necessary parts and gaskets to perform a complete installation.

What kind of engine does a GM SPO have?

GM SPO Group Numbers (cont’d) Engine Engine Mechanical – 5.7L 6-9 2001 Marine/Industrial

What kind of engine is a GM 6-6?

Engine Mechanical Specifications (cont’d) 6-6 Engine Mechanical – 5.7L Engine 2001 Marine/Industrial GM SPO Group Numbers

Is there a vacuum hose in a Chevy Silverado?

Unlike many engines, the V8 engine in your Chevrolet Silverado (Suburban, Tahoe) or GMC Sierra (Yukon, Yukon XL) doesn’t really have a bunch of vacuum hoses. So checking their condition isn’t a long drawn out process.

How to check for vacuum leaks ( 1999-2006 V8 Silverado )?

You can find this tutorial in Spanish here: Como Encontrar Fugas De Vacío (1999-2006 V8 Silverado, Sierra, Suburban, Tahoe, Yukon) (at: autotecnico-online.com ). What Is A Vacuum Leak? In plain English, a “vacuum leak” refers to air entering the engine at any point after the mass air flow (MAF) sensor.

What causes a vacuum leak in a 4.8l engine?

In my experience, one the biggest sources of vacuum leaks on the 4.8L, 5.3L, and 6.0L engines are the intake manifold gaskets. Depending on your specific vehicle, the intake manifold gaskets are made of a composite material (plastic) or are made of rubber and seem to be engineered to fail and keep the economy going (this is my opinion).

Is there no fuel from injectors to start truck?

No fuel from injectors to start truck. When I try and start my 93 Chevy Cheyenne k3500 no fuel come out of the injectors. If I use starting fluid the truck starts and the injectors work great. Has died a couple times while driving, but mostly runs fine and then won’t start one turned off.

What to do if your Vortec won’t start?

96 Chevy C1500 5.7L Vortec Truck won’t start, Replaced Fuel Pump, Filter & Has Spark. Hey everyone, I have a 1996 Chevy C1500 with a 5.7L Vortec, I got the truck recently and was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, also the pump turns on and there is fuel up at the rail, I pushed the pin and it shot right out.

What causes a CPI fuel injector to fail?

The most common type of failure in the CPI ‘Spider’ fuel injector system is usually fuel leaks (inside the intake manifold plenum).

What should fuel pressure be on GM 4.3L Vortec?

You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 4.3L, 5.0L, 5.7L) (at: autotecnico-online.com ). The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start.

Why does Vortec engine maintain fuel pressure after engine shut off?

The reason why is that the fuel system in all of the CPI and CSFI equipped Vortec engines are designed to maintain fuel pressure for a few minutes after engine shut off.

Why does my GM 4.3L engine not start?

No Start Condition Basics There are three very basic components that the engine, in your GM vehicle, needs to start and they are: Air, Fuel and Spark. When your 4.3L, 5.0L or 5.7L GM vehicle cranks but does not start, it’s because one of these components is missing from the mix.

What should the fuel pressure be to start a Vortec engine?

The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start. The fuel pump produces much more than just 50 PSI of course but the bare minimum the engine needs to start is 50 PSI… so anything less and it will crank for ever before it starts or not start at all.

What’s the problem with my 1997 Chevy Silverado?

I have a 1997 chevy 1500 siverado with a 5.7 vortec that has been having a problem for about 6 months now. The truck starts, idles, and revs normally and when accellarating slowly everything works just fine, but once you get past half throttle it falls on its face and acts like it has a clogged fuel filter or bad fuel pump.

How to troubleshoot the’spider’fuel injector assembly?

TIP 1: You’ll need a fuel pressure gauge to troubleshoot the fuel injector assembly on your GM 4.3L, 5.0L or 5.7L pick up (van, mini-van, SUV). TIP 2: You’ll be working around fuel (gasoline), which is extremely flammable. Your safety is your responsibility… so be careful, use common sense and think and act safety all of the time.

Is the crank sensor OK with no fuel injector?

Since no leaks were present and pressure was normal, then the fuel pressure regulator is OK. The PCM was indeed trying to activate the injector. This indirectly confirms that the crank sensor is OK, since without a Crank Sensor Signal, the PCM will not activate the fuel injectors.

The most common type of failure in the CPI ‘Spider’ fuel injector system is usually fuel leaks (inside the intake manifold plenum).

What does CPI stand for in GMC Jimmy?

Although this case study is about a 1995 4.3L GMC Jimmy, the info and tests in this article apply to all of the ‘Spider’ injector types on the road, whether it’s a 6 or an 8 cylinder. CPI stands for: C entral P ort I njection. This system was used on the 4.3L engines from 1992 to 1995 only.

Why does my GMC Sierra suddenly stop running?

Truck suddenly stops running, acting like it’s out of fuel. There is fuel in the gas tank and, I can hear the fuel pump when I turn the ignition on. Is there a fuse, or relay that is maybe causing this to happen?

What kind of problems does a 1993 Jimmy have?

I have a 1993 Jimmy. It has been having starting issues. We have heard everything from the fuel injectors needs to be cleaned to replacing the water pump. We have replaced the computer twice, the second time the garage replaced it free. But now it does not start but turns over.

What is fuel pressure on GMC Suburban 5.7?

Fuel pressure shows approximately 14 psi at the filter when the pump is running. As soon as the relay kicks the pump off the pressure drops to zero quick. I think this is normal as some TBI systems have a built in release.

Why does my GMC Suburban not start up?

It shoued DTC 15 open circuit in coolant temp sensor, 22 something about the throttle position sensor and 54 which is fuel pump circuit low voltage. BTW, I found out the truck will start if I keep the gas pedal to the floor when cranking, however the engine just dies as soon as I let off the pedal.

What causes a fuel injector to go bad?

The most common type of failure (related to the ‘Spider’ fuel injector) is usually not the assembly itself going bad, but the fuel pressure regulator going bad. The fuel pressure regulator is infamous for leaking fuel from its vacuum inlet nipple.

What kind of fuel injection does GM 4.3L use?

‘Spider’ Fuel Injection Basics There are two types of the ‘Spider’ fuel injector assemblies used on the GM 4.3L, 5.0L, 5.7L engines and this article will help you with both types. In case you’re wondering, one type belongs to the Central Port Injection (CPI) system and the other to the Central Sequential Fuel Injection (CSFI) system.

What happens when you replace the Spider fuel injector?

So, you replaced the fuel pressure regulator, or the entire ‘Spider’ fuel injector assembly and now, when you start the pickup (SUV, van or mini-van) it idles very rough!

How to repair a GMC Vortec fuel injector?