Most popular

How to remove dual wheels to repair rear brakes?

How to remove dual wheels to repair rear brakes?

Lift the rear of the truck using the truck jack placed under the rear axle by the lower shock mount. Place the heavy-duty jack stand as close to the wheel as possible under the axle. Repeat the procedure for the other side to elevate the rear axle.

How to do a rear disc brake job?

Let that stuff sit for 10 minutes or so. 4) Unbolt the Caliper, and tie a bungee cord around it to the upper A-Arm or another sturdy piece of metal. (Make sure it doesn’t pull on or put stress on the brake line!) 5) Unbolt the Pad Holder, and remove the old pads.

Can a caliper not release cause brake drag?

Just like with the master cylinder not releasing causing the brake drag, a caliper not releasing and staying applied can do the same thing. If only one position is dragging, this could be the case.

Are there rear brakes on a Dodge van?

My van has front brakes and since I put on the master cylinder, the brake system light and the ABS light are no longer illuminating. But it seems illogical that those warning lights would go out when I do not have rear brakes. My van has disc brakes on the front and on the rear there are drum brakes.

Lift the rear of the truck using the truck jack placed under the rear axle by the lower shock mount. Place the heavy-duty jack stand as close to the wheel as possible under the axle. Repeat the procedure for the other side to elevate the rear axle.

What causes a drum brake to stop working?

The common cause of this is a broken or weak retracting spring on drum brakes, corroded or jammed caliper piston, corroded mounting pins or the bushings on a floating caliper, the drum brake self-adjusters are overextended or there is an emergency brake cable that is sticking or is frozen in place.

Can a dual rear wheel truck be reinstalled?

This is not always the case on dual rear-wheel trucks, but if they’re present and you try to reinstall the tires without lining them up properly, you’re going to incur damage to the lug studs, rims and hub. Place the interior wheel next to the outside wheel in such a way that you know which is which when it comes time for reinstallation.

What’s the best way to do front brakes?

If you’re doing front brakes, you may wish to turn your steering wheel to afford better access to the caliper. stash road wheel UNDER the chassis while you’re working on the brake.

How to reinstall a dual rear wheel pickup?

Place the interior wheel next to the outside wheel in such a way that you know which is which when it comes time for reinstallation. Repeat the procedure for the other side. Torque the lug nuts to proper foot pound specifications required for your dual rear-wheel pickup after reinstallation. The owner’s manual should have this information for you.

Can you remove rear wheels from a truck?

In some cases, the wheels are stuck to the hub and may need to be shocked off or broken free from the large hub of the rear axle. This is a challenging task with a truck only raised a few inches off the ground.

Can a rear wheel truck have two wheels?

There also may be a small pin on the hub of the interior rim that would inset into a hole on the hub of the outside rim. This is not always the case on dual rear-wheel trucks, but if they’re present and you try to reinstall the tires without lining them up properly, you’re going to incur damage to the lug studs, rims and hub.

What should the rear axle seal be on a Ford PowerStroke?

If the oil is running down the tires it sounds like you have a leaking wheel seal. If your truck is DRW then your axle will be a Dana 80. And if it is a SRW then your axle will be a Sterling 10.5. The procedure for changing a wheel seal is very similar on any full floating axle.

This is not always the case on dual rear-wheel trucks, but if they’re present and you try to reinstall the tires without lining them up properly, you’re going to incur damage to the lug studs, rims and hub. Place the interior wheel next to the outside wheel in such a way that you know which is which when it comes time for reinstallation.

What kind of brakes do you need for a Ford F-150?

You need brakes that pack as big of a punch as your Ford F-150. The NEW, American-made 6-piston B8-Brawler Brake Caliper from SSBC-USA gives your half-ton Ford pickup truck the knockout stopping power, style and performance it needs to get the job done.

Where to buy Ford F350 Super Duty brake rotors?

Shop AutoZone for Ford F350 Super Duty Brake Rotor. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only

Do you have to replace brake rotors in pairs?

Brake rotors are replaced in pairs. If you choose front brake rotors, both front wheels will get new rotors. This service comes with brake pads. Unless brake pads were replaced recently, pads must be replaced while replacing the rotors.

How do you replace front brake rotors on a Chevy Silverado?

If you choose front brake rotors, both front wheels will get new rotors. This service comes with brake pads. Unless brake pads were replaced recently, pads must be replaced while replacing the rotors. Measure the thickness of brake rotors. Remove and replace rotors and pads. Perform a brake safety inspection.

In some cases, the wheels are stuck to the hub and may need to be shocked off or broken free from the large hub of the rear axle. This is a challenging task with a truck only raised a few inches off the ground.

When to replace brake pads on Ford F350?

Replacing brake pads and rotors on a 2008 Ford f350 Super Duty 4X4. This process is similar to 1999-2013 Ford F250 and F350 Super Duty 4X4 trucks. Be sure to consult your repair manual for proper torque specifications for your specific application. Watch this video for more information. Loading…

What kind of wheel does a Ford F Series truck use?

Front conversion kit for 1999-2004 Ford F-Series Truck, uses X45463 sixteen inch steel wheel ONLY. Width: 4.5 inches. Red bottle pictured is loctite.

When do you need to replace rear brake pads?

If your pads are worn on one side and not on the other than most likely your pins are frozen, rusted in place and most likely you will have to replace that whole caliper holder. the rear brakes come off with just removing 4 bolts and a bit of time and effort. Loading…

Can a single wheel be mounted on a dual wheel?

Simply remove your single wheel and tire and mount the conversion hub in the single wheels place. The conversion hub will give you the proper spacing and convert the vehicle from a stud piloted to a hub piloted mounting for dual wheels. The adapters are approximately 3-4″ thick depending on vehicle type with 5/8″ studs.

Author Image
Ruth Doyle