How to fix headlight switch on Dodge Ram?
How to fix headlight switch on Dodge Ram?
Dodge Ram – Headlight Switch REPAIR FIX – DON’T BUY A NEW SWITCH!!! – YouTube If playback doesn’t begin shortly, try restarting your device.
Can a faulty headlight switch cause an accident?
Faulty headlights are not only a headache to deal with, but they are also a major hazard and could lead to an accident, or you getting pulled over by a police officer. If you feel your headlight switch might be malfunctioning, you should address this problem right away.
What to do if your headlight switch melts?
If the headlight switch in your Ram is overloaded, chances are it is also melted. Your best bet would be to replace the connector and install a heavy-duty harness to take the load off of the switch. Doing this will extend the life of your switch and solve your issue with non-working headlights.
What to do if your headlight switch blows out?
If the switch is being overloaded with too much current, it will blow out. The ideal solution is to splice in new wiring and add two relays: one to handle the headlights and the other to handle the park lights. This way, only the headlight switch handles low current to activate the relays themselves.
Dodge Ram – Headlight Switch REPAIR FIX – DON’T BUY A NEW SWITCH!!! – YouTube If playback doesn’t begin shortly, try restarting your device.
Faulty headlights are not only a headache to deal with, but they are also a major hazard and could lead to an accident, or you getting pulled over by a police officer. If you feel your headlight switch might be malfunctioning, you should address this problem right away.
If the headlight switch in your Ram is overloaded, chances are it is also melted. Your best bet would be to replace the connector and install a heavy-duty harness to take the load off of the switch. Doing this will extend the life of your switch and solve your issue with non-working headlights.
If the switch is being overloaded with too much current, it will blow out. The ideal solution is to splice in new wiring and add two relays: one to handle the headlights and the other to handle the park lights. This way, only the headlight switch handles low current to activate the relays themselves.
What happens if the headlight switch does not work?
If the headlight switch completely fails it may prevent all of the vehicle’s lights from functioning. You may find that when you go to turn on the headlights, none of the modes will turn on any of the lights. A vehicle without any functioning lights is not safe to drive, especially in low light and nighttime situations.
How does a headlight switch work on a car?
Most headlight switches operate by pulling the lever backwards and locking it into place to activate the high beam headlights. Over time however the switch can break, which can lead to issues keeping the high beam headlights turned on.
Can a broken headlight switch be a safety hazard?
A broken switch may only work on certain modes, or may cause them to come on and off intermittently and erratically. Any problems with the vehicle’s lights can become a safety hazard due to the decrease in illumination and visibility. 2. Issues with the high beams
What kind of headlights does a Dodge Ram use?
Early 2nd gen Rams used a pull switch to control the headlights that was unfortunately prone to shorting out on itself. Later rams switched to a more modern rotary switch. Both switches are prone to problems with the connectors, but replacing them is not too difficult. Tilt your steering wheel down.
How do you change the light bulb on a Dodge Ram?
Twist the locking ring counter-clockwise then pull it from the headlight housing. Pry off the electrical harness clip and pull the bulb from the socket. Insert the new bulb to the socket. Reinsert the bulb socket to the headlight housing and twist the ring clockwise to lock it in. Figure 1. headlight bulb socket.
Why is the low beam light out on my Dodge Ram?
I swapped the known good bulb from the other side and the low beam was still out, even though the high beam and fog lights were all functional. I started researching other causes for the issue and discovered that 2006 and later model year Dodge trucks have no fuses nor relays controlling power to the lights.
