How to fix C4 Corvette headlights that wont go up?

How to fix C4 Corvette Headlights that wont go up or down. This video will show you how to take off the headlight assembly, take off the headlight motor, and change out your worn gear with a nice new one If your headlights are not going up, or it goes up but easily falls back down, this is what you need to do to fix it.

Is the headlight actuator on a 1997 corvette?

NOTE #1: There are 2 variations of the headlight actuator motor assemblies used on the 1997 and up C5 Corvettes. The 97-99 motor assembly (and some early 2000 models) is all aluminum and has a removable side cover that is held on with 3 machine screws. The gear kit for the 97-99 motor assembly includes a new side cover gasket.

What kind of headlight motor does a C5 Corvette have?

NOTE #2: If you have a 97-99 C5 Corvette there is the possibility that one or both of the early aluminum type headlight motor(s) have been replaced with the newer 2000+ style plastic type headlight motor(s). To ensure you receive the correct kit please check to see if the headlight motor(s) in your 97-99 (and early 2000) C5 are plastic or aluminum.

Can a GM 97-99 headlight motor be replaced?

This newer style headlight motor change can occur because the 97-99 style motors are no longer available through GM. If a previous owner or a GM dealer has replaced a headlight motor in a 97-99 they may have installed the newer 2000+ style. A quick check will ensure that you order the correct rebuild kit.

Can a C5 headlight be rebuilt with a T bracket?

Corvette Central has a headlight motor rebuild kit ( 1997-99 models here, 2000-04 models here) that offers a perfect solution. In addition to a bronze gear for those who need it, the C-Central kit also includes a T-bracket that fits over the gear housing cover, keeping it in place even if the epoxy fails.

How do you mount a headlight on a corvette?

The headlight has a similar one that is black. the headlight assembly. mounting bolts. There is a small bracket 13mm socket. An additional 10mm bolt should also be removed from the bracket. headlight assembly can now be placed on a towel on your work bench.

How do you replace a bushing on a corvette?

Separate the two halves and the gear. Place the three new delrin bushings in the bottom half and replace the top half. for this. housing. It will be tight due to the way the teeth in the gear are cut. will put it in place. Replace the gear cover

Where is the headlight located on a corvette?

Click to expand… Hell no, don’t take that to the dealer! It can only be one of two things. The headlight module (which is located just below the passenger’s headlight) or the gear that is in the headlight motor. Check the headlight connector and the ground in that area also. Here, have a look at this thread.

Why are the headlights not working on my Chevy?

A wiring issue will require a check of wires with a multimeter with the help of your vehicle’s schematics. Only the low-beams or high-beams work: If your headlights both work but only when the low-beams or high-beams are on, the problem is likely with the dimmer switch.

Why are the lights on my car not working?

Headlights work, but not very well: If your headlights don’t provide enough light for the road ahead, it can come from several problems. Fogging of the lenses, clouding inside the housing, moisture inside the housing, and headlights that are not aimed properly are the most common causes.

What was the first Corvette with four headlights?

This was the first Corvette with four headlights — and those were set in chrome frames. Then there were chrome strips that ran from those headlights across the top of the front fenders. And more chrome strips running down the trunk lid. And there was a big chrome toothy grille with smaller chrome openings on either side of it.

How much does it cost to fix a C4 headlight?

Corvette C4 Headlight motor knocking easy repair fix less than $20!! – YouTube CHEAP! Corvette C4 Headlight motor knocking easy repair fix less than $20!! If playback doesn’t begin shortly, try restarting your device.

Why was 1980 such a bad year for corvettes?

Whoever signed off on this rolling monument to bad taste should have been hanged, or better yet, forced to drive one. It would have been more painful. In general, 1980 was a lousy year. Inflation was rampant, the economy was in the doldrums and the Corvette was awful.

Are there plastic headlight bulbs for corvettes?

As most owners know, the plastic headlight motor gears and bushings are a very common failure, and the reduced weight of the plastic bulbs in later years was in effort to reduce failures on the original plastic motor gears. The plastic Wagner bulbs are no longer in production and are becoming a more difficult part to find.

What’s the difference between 1984 and 1990 Corvette lights?

For 1984-1987 and 1988-1990 an easy way to spot the difference from a distance is that the earlier housings will be gray in color where as the later ones are black. This is true for both the front and rear side marker lights. The outside surface of these lights appear physically the same for all years.

When did the fog light bulb come out on a corvette?

The earlier 1984-1990 design used a unique connection plug for the fog light bulb and is one of the points that need modified in a headlight wiring harness if converting an 84-90 front end to a 1991 or later.

Can you replace the headlight assembly on a 1984 Corvette?

So… If you have an 85-87 car, and you are replacing an entire headlight assembly from a 1984, you will not be able to bolt down this top inside bracket as it will be too short.

What kind of tail lights did a C4 Corvette use?

C4 Corvettes used two designs of tail lights. Round lights for 1984-1990 and a more squared off or oval type design for 1991-1996. (1990 in ZR-1’s) A very common issue with even low mileage C4’s is cracking of the tail light housing at the point where the mounting bolts secure it to the rear bumper cover.

How do you adjust the beam of a headlight?

Block one of the headlights and look to see where the other beam hits the wall. It should fall at or below the horizontal tape line you marked and to the right of the vertical tape line. If it doesn’t, use the adjusters located on the headlight housing to adjust the beam until it hits the right spot on the wall.

How do you remove a headlight from a car?

Use a tape measure to make sure you are the proper distance away from the wall. Turn off the headlights. Remove the trim ring from around the headlights and locate the adjusting screws. These screws are typically found adjacent to the headlight, though some manufacturers put the screws in the engine compartment, behind the the headlights.

Where do you put the adjuster on the headlight?

These screws are typically found adjacent to the headlight, though some manufacturers put the screws in the engine compartment, behind the the headlights. The horizontal adjuster and the vertical adjuster should be marked. Always defer to the specs in the owner’s manual—some manufacturers recommend different distances for proper adjustment.

How do you adjust the headlights on a corvette?

To adjust headlights, locate the notches in the headlamp cover adjacent to the headlamp. Shown in the picture below above the headlamp opening and to the right of the headlamp opening in the cover. Insert screwdriver into this opening to adjust headlamp.

When do I Turn Off the headlights on my 1995 corvette?

When I turn on or off the headlights of my 1995 corvette, the headlight motor is still running making a knocking noise for about 5 seconds. Do I need to replace the headlight motor or just the bushing…

How much does it cost to fix a Corvette C4 headlight motor?

BigSLICK shows a cheap easy fix to rebuild a Corvette C4 headlight motor. Cost is less than $17 to fix 2 motors, including tax. I found the part at Advance Auto: “Doorman HELP! model 74410” a package of 3 gear bushings. You need one package for each motor.

Where are the adjusters on a C5 Corvette?

The pop-up headlights on the C5 Corvette can be adjusted both horizontally and vertically via the adjustment screws located in the headlight housing. The adjustment screws are located on the inboard side of the headlight. There’ll be a plug on the headlight housing, covering the horizontal adjuster. Use Figure 2 as a reference. Figure 2.

What kind of gears do I need for a corvette?

Our inventory selection includes headlight motor nylon gears and headlamp motor repair bushings, along with bronze headlight gears to meet your Corvette needs. In addition, Zip stands behind all of our Corvette parts with our “No-Hassle Guarantee” – That\’s customer service the Zip way!

Where is the power connector on a C5 headlight?

The power connector is located immediately behind the headlight motor. Remove the connector from the tab that holds it in place, lift slightly on the snap that holds the two parts of the connector together and pull apart. 3. Using a Phillips screwdriver, remove the three screws that hold the black plastic headlight bezel in place.

How do you replace a headlight motor on a corvette?

An additional 10mm bolt should also be removed from the bracket. headlight assembly can now be placed on a towel on your work bench. about to begin! headlight motor from the headlight assembly. bracket. Spray some WD-40 on the heads to help loosen them. small retaining ring on the very end of the shaft.

Are there any C4 Corvette headlight gear left?

Only 1 left in stock – order soon. . . . Only 4 left in stock – order soon. . Only 3 left in stock – order soon. . Only 13 left in stock – order soon.