How to do an excavator walkaround every day?

How to do an excavator walkaround every day?

I typically train operators to do the following when performing an excavator walkaround: Start in the same place every day. For me, I always start at the front of the cab. That way when I end my walkaround, I end at the cab as well. Make your inspection routine. Look in non-obvious but critical areas. Look up, down, left and right.

Is it safe to start an excavator in the morning?

As an excavator owner and/or operator, you know it’s not wise to just hop in the cab in the morning and start working right away. While time is money on most of your jobs, not taking a few minutes to do an inspection can hurt your uptime, cause unnecessary damage and wear to your machine, and compromise safety.

How big is the boom on an excavator?

Boom length varies based on manufacturer and machine model. For example, the long-reach version of the Volvo EC380 excavator is 27′ 11″ (8.5 m) compared to the 21′ 2″ (6.45 m) standard boom and 16′ 5″ (5 m) arm that provide a max reach of 48′ 5″ (14.75 m).

How many hours does a Volvo Excavator have?

They both had between 5,000 and 8,000 hours and they blew hoses, had some sort of bad oil leak around the slew ring and the swing motor, and the seals were blown out of the slew rings, and they both started hard in 40 degree weather. Watching/looking over those 2 excavators made a bad impression on me.

What to do if your excavator swing is not working?

Also, make sure you’re getting full pilot signal to the swing spools and that the main pump for that swing direction is stroking up. Check your pilot filter and in tank return filter for metal or debris that could indicate an internal component failure or problem. On the swing motor you should have two relief cartridges.

How does the swing motor on an excavator work?

The swing motor drives the transmission. The swing motor receives oil from a control valve and rotates. The gearing within the transmission will reduce the high speed, low torque output of the hydraulic motor into low speed, high torque required to swing the excavator.

When does an excavator make a grinding noise?

ALL NEW MEMBERS PLEASE READ THIS FIRST!!! Discussion in ‘ Excavators ‘ started by andrew80, Apr 19, 2013 . We have this excavator and now it has this grinding noise when turning left or right. When doing it slowly there´s no noise, but at normal speed you can hear it clearly.

Why does my excavator shake when I start it?

I just bought a 1987 mitsubishi ms120 excavator and the issue is that when you start up or slowing down the swing the machine shakes. feels like the swing brake is chattering. I changed the drive oil with new 80-140w thinking there was a wet clutch in the drive. on top of the hydraulic motor there is 2 adjusters and one is missing the cap.