How to change the brake light on a C4 Corvette?

How to change the brake light on a C4 Corvette?

How to Change Brake Light in a C4 Corvette. 1 Step 1. Remove the license plate from the rear bumper using a Torx screwdriver. The tag will normally be attached with four Torx screws. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

How do you remove brake light bulb from rear bumper?

Turn the bulb counterclockwise to release it from the bulb holder. Use a small socket and ratchet to remove the four screws holding the brake light assembly to the rear bumper.

When did corvettes start using third brake lights?

There were 4 designs of third brake lights for C4 corvettes. 1986-1990 Coupes had theirs mounted on top of the rear glass hinge plate. 1990-1995 ZR-1 also used this same style third brake light as the 86-90 coupes. 1986-1990 Convertibles used two designs, 86-88 and 89-90. Then in 1991-1996 coupes and convertibles used a common design.

Turn the bulb counterclockwise to release it from the bulb holder. Use a small socket and ratchet to remove the four screws holding the brake light assembly to the rear bumper.

What kind of tail lights did a C4 Corvette use?

C4 Corvettes used two designs of tail lights. Round lights for 1984-1990 and a more squared off or oval type design for 1991-1996. (1990 in ZR-1’s) A very common issue with even low mileage C4’s is cracking of the tail light housing at the point where the mounting bolts secure it to the rear bumper cover.

Can you replace the headlight assembly on a 1984 Corvette?

So… If you have an 85-87 car, and you are replacing an entire headlight assembly from a 1984, you will not be able to bolt down this top inside bracket as it will be too short.

When did they stop using round tail lights?

Round taillights were used through 1989, with square lights employed starting in 1990. Brake light bulbs are normal maintenance items while the brake light assembly will require replacement when damage occurs.