How much horsepower does a 1974 360 have?
How much horsepower does a 1974 360 have?
| Engine manufacturer: | Chrysler LA-series V-8 360 |
|---|---|
| Horsepower net: | 182.5 kW / 248 PS / 245 hp (SAE net) |
| / 4800 | |
| Torque net: | 434 Nm / 320 ft-lb |
| / 3200 |
How much horsepower does a 360 v8 have?
| Engine Specifications | |
|---|---|
| Engine model | Chrysler 5.9 L (360 cu in) Magnum |
| Power output | From 234.0 PS (172.0 kW; 230.0 HP) at 4,000 rpm to 249.0 PS (183.0 kW; 245.0 HP) at 4,000 rpm |
| Torque output | From 447 N·m (45.6 kg·m, 329.4 ft·lb) at 3,250 rpm to 468.0 Nm (47.7 kg·m; 345.4 ft·lb) at 3,250 rpm |
| Firing order | 1-8-4-3-6-5-7-2 |
How many horsepower does a 1974 Dodge Dart Sport Coupe have?
gasoline (petrol) engine with displacement: 5210 cm3 / 318 cui, advertised power: 112 kW / 150 hp / 152 PS ( SAE net ), torque: 346 Nm / 255 lb-ft, more data: 1974 Dodge Dart Sport 2-Door Coupe 318 V-8 (man. 3) Horsepower/Torque Curve how fast is this car ? top speed: 185 km/h (115 mph) (©theoretical);
When did the Dodge 360 V8 come out?
The Chrysler Corporation, also operating as Chrysler LLC, introduced the Dodge 360-cubic-inch V8 engine in the waning years of the muscle car era in 1971. Production ended in 2002. The 360 V8 was part of Chrysler’s “LA” family of engines.
What kind of engine does a Dodge Dart have?
The new Dart came standard with a new engine, the 225 cu in (3.7 L) slant-six. The 318 cu in (5.2 L) (standard equipment on certain Phoenix and Pioneer body styles) and 361 cu in (5.9 L) V8s were optional with two-barrel or four-barrel carburetors, and with single or dual exhaust.
How much horsepower does a Dodge 360 cubic inch have?
Final numbers on the 360 cubic-inch LA engine were 387 horsepower and 434 lb-ft of torque. That means a net increase of 162 horsepower and 96 lb-ft of torque over the OEM engine configuration.
What are the Mopar 360 high performance crate engines?
Mopar 360 High Performance Crate Engines 1 • OE Remanufactured block, crank and rods 2 • Stock/OE Cast Iron Heads 3 • Dyno Tested More
When was the Mopar 360 cast crankshaft introduced?
It was introduced with a 2-bbl carburetor in 1971. Not intended as a performance engine, it also featured a cast crankshaft and low compression ratio (8.5 to 1) cast pistons. When the 340 was discontinued in 1973, the 4 barrel induction was transferred to the 360 but the cast crank and low compression ratio remained.
What kind of engine does a 1978 Chrysler 6 cylinder have?
All 1978 Chrysler V-8 and 6-cylinder engines have an adaptor to receive a magnetic probe for timing the ignition magnetically (you can still set the ignition with a timing light). Click to expand…
What kind of engine does a Dodge 318 have?
Electronic fuel injection finally came to the 318 (and the 3.9 V6 based on it) in the 1988 Dodge trucks (bu tnot cars). This was, in contrast to the Imperial’s system, quite conventional, with a single dual-injector unit in the throttle body (one injector for each bank). Power output rose by a much-needed 20% to 170 hp and 280 lb-ft of torque.
