How much does a jeep fan clutch cost?

How much does a jeep fan clutch cost?

You should expect to pay about $70. This is what a Fan Wrench looks like. You can pick one up from most any auto parts store for about $5. The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.

Where can I buy a new fan clutch?

You can purchase a new fan clutch at just about any auto parts store in town. This is a common part and it will most likely be in stock as well. You should expect to pay about $70. This is what a Fan Wrench looks like. You can pick one up from most any auto parts store for about $5.

How to make a jeep TJ 4.0L fan clutch?

1. Disconnect your Jeep’s radiator overflow bottle hose from the radiator. 2. Remove your Jeep’s radiator overflow bottle from the fan shroud and set it aside vertically so that no coolant spills out. 3. Using a 7/16″ socket, remove the 4 bolts securing your Jeep’s radiator fan shroud to the front clip.

How to remove a fan from a Jeep Wrangler?

Continue removing your Jeep’s radiator fan by rotating the nut COUNTER-CLOCKWISE (as viewed from the front of your Jeep) and then carefully pull it and the fan shroud out from your engine compartment. NOTE: Make sure to avoid any contact with your Jeep’s radiator as the fins on it can be easily damaged.

What is the w80585 Ford fan clutch wrench set?

Performance Tool W80585 Ford Fan Clutch Wrench Set allows easy access to fan clutch nut on 1984 to 1993 Ford 4.9-Liter E and F series truck engines, 1984 to 1987 Ford 4.6-Liter modular engines, 2.8-Liter engines, 1988 to current 2.9-Liter to 3.0-Liter engines, 1990 to current 4.0-Liter engines.

How old is the fan clutch wrench on a Ford F150?

This tool worked perfectly for a 2000 Ford F150 4.2 V6 which means it should work fine on any 4.2L Ford engine. I literally loosened the 20 year old fan clutch nut in seconds when I was prepared for a knuckle-bleeding struggle.

What kind of wrench to use for fan clutch?

After seeing others struggle with a crescent wrench and a long screwdriver, I decided to get an inexpensive fan clutch wrench to save some aggravation when I had to replace the timing cover gasket on my F150. This tool worked perfectly for a 2000 Ford F150 4.2 V6 which means it should work fine on any 4.2L Ford engine.

When did the Ford fan clutch Nut come out?

Easy access to fan clutch nut on 1984 through 1993 Ford 4.9L E and F series truck engines, 1984 through 1987 Ford 1990 to current 4.0 Liter engines. These items are shipped from and sold by different sellers. Show details Only 7 left in stock – order soon. Ships from and sold by Tool Liquidators. Only 8 left in stock (more on the way).