How long does it take to rebuild a 4L60E transmission?

How long does it take to rebuild a 4L60E transmission?

Someone has to know the exact condition of your car to answer this question. The estimated time is about 8 hours. To rebuild the transmission is an additional 6 hours.

What is the operation manual for a 4L60E transmission?

Installation and Operation Manual for 4L60E, 4L65E, 4L70E, 4L80E, and 4L85E transmissions Installation and Operation Manual for 4L60E, 4L65E, 4L70E, 4L80E, and 4L85E transmissions 2 US Shift Transmission Control System instruction and operation manual.

How to repair a GM Hydramatic 4L60 transmission?

THIS IS THE MOST COMPLETE OEM WORKSHOP REPAIR MANUAL FOR GM HYDRAMATIC 4L60 4L60E TRANSMISSION.

How much fluid does a GM 4L60E need?

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

What kind of transmission does THM 4L60-E have?

This booklet contains general description and the procedures necessary to repair, overhaul, or service the new THM 4L60-E electronic automatic overdrive transmission. The 4L60-E is a fully automatic rear wheel drive transmission. This unit is basically a THM 700-R4 with electronic controls added to the valve body.

Is a 4L60E interchangeable with a 4L80E?

FYI – 4L60E & 4L80E transmissions are NOT directly interchangeable. The wiring pinout of the trans plug is different, and 2 VSS’s are used versus 1 on the 4L60E. Besides the wiring difference, the ECM also requires a segment swap as that portion of the transmission control is completely different.

How many solenoids are the 4L60E?

There are 2 shift solenoids in a 4l60e (1-2 and 2-3), and both control up and downshifts with fluid passing through them when commanded to do so by the computer. However, when they go bad, you will notice very quickly. Your transmission will display a variety of symptoms, but sometimes these issues can be confused by other common 4l60e issues.

What does the E stand for in 4L60E?

4L60E Identification. The 4L60E transmission has been in production for over twenty years, even longer if you consider the fact that it came from the 4L60 (700R4). The 4L60 got the E at the end whenever control of the transmission was switched to the engine computer. The E stands for “electronic” or electronic shift.

What is the length of a 4L60E?

The 4L60E has a weight of 150 lbs without fluid and the length of 23.5″, while the 4L80e have the weight of 236 lbs and the length of 26.4″. Just with these number, you can probably calculate that there is a big difference in size and weight between these transmissions.