How long does it take to install coil rite air springs?
How long does it take to install coil rite air springs?
Average install time is 1–2 hours. Most of our Coil-Rite kits are no-drill which utilize the factory holes and can be installed in half the time or less. Everything is included for a quick, easy installation.
Is there a way to turn out the air suspension light?
For those of you with a ’98 on, you are out of luck if you wish to disable “air suspension” indicator on dash. It is controlled by the ECM/BCM, and short of reprogramming the computer, there is no way to turn out the light.
How do you remove air springs from car?
Remove by either prying up the lower end of the spring,or by tapping on the retaining clip from the bottom side using a punch. Remove the spring retainer clip at the top of air spring, above upper spring seat. This will then allow for removal of the air springs from the vehicle. 8.
How to disable check air SUSP message after spring?
Locate and cut the DARK GREEN wire with the LIGHT GREEN stripe or “tracer”. This will be the wire to cut on most models. Leave the module connected and turn the suspension switch ON in the trunk. Thank You! It worked, and that wire is located on the grey plug harness.
For those of you with a ’98 on, you are out of luck if you wish to disable “air suspension” indicator on dash. It is controlled by the ECM/BCM, and short of reprogramming the computer, there is no way to turn out the light.
Average install time is 1–2 hours. Most of our Coil-Rite kits are no-drill which utilize the factory holes and can be installed in half the time or less. Everything is included for a quick, easy installation.
How to disable the check air suspenson light?
The instructions to disable the “Check Air Suspenson” light were included in the kit. I followed these instructions without success. I disconnected pin #11 from the wire harness under the dash, behind the glove box.
Remove by either prying up the lower end of the spring,or by tapping on the retaining clip from the bottom side using a punch. Remove the spring retainer clip at the top of air spring, above upper spring seat. This will then allow for removal of the air springs from the vehicle. 8.
