How does the parking sensor work on a Ford Galaxy?

It can be automatically switched on by engaging reverse gear or by pressing the switch on the dashboard. Once enabled the switch glows orange and the system can be disabled by pressing the switch a second time or driving about 10mph.

What causes the parking sensor to stop working?

Generally a new controller is required once this has happened but if caught early enough it may be possible to dry out the unit with no ill effects. The second and third are coupled – and are by far the more common cause being a simple sensor fault. The system is designed to enter a fault mode and stop working as soon as just one sensor is faulty.

What does the fault light on the parking sensor mean?

Once enabled the switch glows orange and the system can be disabled by pressing the switch a second time or driving about 10mph. Failure a fault is detected the system indicates this by a short beep and then a flashing switch when the system is turned on.

How to check front and rear parking sensors?

In some cases you may have to open the controller and then check the “measuring blocks” – Group 1 shows the front sensors, group 2 shows the rear sensors. The system MUST be active to view these figures, ie, reverse engaged or the switch depressed to engage.

How does the PDC system work on a Ford Galaxy?

Two versions are fitted to the Galaxy, a “low” system which monitors just the rearward direction and a “high” system which monitors both the front and rear of the vehicle. The system detects obstacles from 1.2meters down to 20cm with an additional 80cm field to the sides. The PDC system is only active when enabled and below a speed of around 10mph.

Where are the fuse panels on a Ford Galaxy?

Here you will find fuse box diagrams of Ford Galaxy and S-MAX 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

How to retrofit genuine parking sensors Ford owners club?

if cannot find anything, unfortunately you cannot retrofit it If you have there just one yellow connector – you can retrofit just the rear sensors if you have there 3 connectors (2x yellow, 1x black) – you are lucky and you can retrofit the front or the whole automated parking assist. 2.

What do you need to know about a Ford Galaxy?

Central locking, telephone, instrument panel, diagnosis, radio, air conditioning, parking aid Cooling fan extended run, air conditioning, rear and front blower, heated front screen, auxiliary heating Water pump (V6), thermo switch coolant, ABS, Cooling fan extended run, air conditioning, wiper switch

What does the fuse box on a Ford Galaxy do?

Thermo switch, cooling fan speed 2, air conditioning, Instrument panel, cooling fan extended run Central locking, telephone, instrument panel, diagnosis, radio, air conditioning, parking aid Cooling fan extended run, air conditioning, rear and front blower, heated front screen, auxiliary heating

What kind of sensors do you use in a Ford?

Ford Motor Company recommends this complete line of sensors exclusively for use in Ford and Lincoln vehicles. Bracket And Lever Assembly Part #: 5A967 Item is currently on back order. Contact Your Dealer to check on part availability.

Where is the fault code check on a Ford Galaxy?

Ideally you want a fault code check ran on the PAM (parking aid module ) As this will pinpoint the location ie: front of rear or an individual sensor

How can I tell if my reverse parking sensor is working?

Put the vehicle in reverse (no need to start it), and put the emergency brake on. Run your fingers along each of the sensors on the rear bumper. If they are active and working, they will emit a subtle buzzing or ticking that you will feel.

How does the parking sensor work on a Ford Galaxy?